ライフサイエンスコーパス: PVDF

1 PVDF and P(VDF-TrFE) nano- and micro- structures have be

2 PVDF films underwent significant plastic deformation and

3 PVDF flanges achieved were of a mushroom-like shape and

4 PVDF membranes-maintained separation functionality with

5 PVDF-based ferroelectric terpolymers with giant ECE are

6 PVDF-GO 1.5 wt.% shows a notably higher enhancing effect

7 PVDF-HFP exhibits higher degrees of platelet activation-

8 To address this issue, we develop a PVDF piezoelectric nanoyarns with an ultrahigh strength

9 of alphaB-crystallin, were synthesized on a PVDF membrane.

10 polymers were synthesized and blended with a PVDF/graphene oxide (GO) solution, then, electrospun and

11 he electrochemical performances of the Ni/AC-PVDF electrode, but slightly lower (7%) NH(3)-N fluxes w

12 s work can help reducing the amount of added PVDF in piezoelectric membranes with enhanced piezo sens

13 through measurements demonstrate that Fe-ALF-PVDF exhibits outstanding CO(2) adsorption capacities (4

14 Fe-ALF-PVDF presents an innovative adsorbent material for effic

15 ivation with polyvinylidene fluoride (Fe-ALF-PVDF).

16 tative activation of both PVDF-CH2-CF2-I and PVDF-CF2-CH2-I chain ends toward the synthesis of well-d

17 d LFP can be achieved by reducing nafion and PVDF components, respectively.

18 odulates the interactions between Nafion and PVDF in electrospun membranes.

19 t, it was determined that nitrocellulose and PVDF membranes gave significantly lower levels of backgr

20 only to protein blots on nitrocellulose and PVDF membranes.

21 rent high molecular weight polymers (PEO and PVDF).

22 Flange size and shape in PMMA and PVDF haptics are independent of low- and high-temperatur

23 iece intraocular lenses (IOLs) with PMMA and PVDF haptics.

24 ferroelectric polymers, especially PVDF and PVDF-based copolymers/blends as potential components in

25 ork, both Polyvinylidene fluoride (PVDF) and PVDF embedded with thermoplastic polyurethane nanofibers

26 nogenerator comprising a ZnO nanowire array, PVDF polymer and two electrodes is presented.

27 ce comparable with those of state-of-the-art PVDF-based tetrapolymers.

28 e NF-inspired Janus membrane (referred to as PVDF-P-CQD) consists of a hydrophobic polyvinylidene flu

29 The coupling between the relaxations of beta-PVDF with those of Nafion matrix is directly correlated

30 n events of Nafion domains supported on beta-PVDF.

31 e to the strong covalent interaction between PVDF and GOQDs.

32 ional groups, verifying interactions between PVDF and the incorporated nanofillers.

33 d to the PVDF-free control, the optimized Bi-PVDF catalyst exhibits significantly enhanced formate pa

34 ntly, in the quantitative activation of both PVDF-CH2-CF2-I and PVDF-CF2-CH2-I chain ends toward the

35 ration, samples could be collected onto both PVDF for traditional N-terminal sequencing and PE or Tef

36 BPP-HNG based on BTO-PVDF and PDMS films are prepared by sol-gel and spin-coa

37 ome the challenge, flexible self-powered BTO-PVDF/PDMS piezoelectric-triboelectric electric hybrid ge

38 ide-trifluoroethylene-chlorofluoroethylene) (PVDF-TrFE-CFE) terpolymer that markedly enhances the pol

39 d for 5 min to GO nanosheets before combined PVDF solution.

40 chanical elasticity can partially compensate PVDF to enhance the piezoelectric response of the PVDF/T

41 and morphological characterization confirmed PVDF's chemical stability and revealed a surface-selecti

42 nst E. coli as compared with that of control PVDF, while aged Ti3C2Tx membrane showed over 99% growth

43 approximately 1 log compared to the control PVDF (3.5-4 log).

44 The CQD/PVDF film and CQD@PVDF film enabled the analysis of TMA

45 The CQD/PVDF film and CQD@PVDF film enabled the analysis of TMA with limits of det

46 By these virtues, the CQD@PVDF film exhibited visible fluorescence color changes f

47 n generator whereas the high dielectric CTAB/PVDF (~ 400) is used as dielectric separator cum storage

48 rid power cell has been developed using CTAB/PVDF composite film in a sustainable manner.

49 in ends toward the synthesis of well-defined PVDF block copolymers is presented.

50 scleral tunnel in combination with different PVDF (polyvinylidene fluoride) and PMMA (polymethylmetha

51 and piezoelectric polyvinylidene difluoride (PVDF) cantilever.

52 Polyvinylidene difluoride (PVDF) is a commercial binder with superior electrochemic

53 des directly onto polyvinylidene difluoride (PVDF) membrane for automated N-terminal sequence analysi

54 ), transferred to polyvinylidene difluoride (PVDF) membrane, and the 37-kd protein-AA spot was digest

55 nitrocellulose or polyvinylidene difluoride (PVDF) membranes.

56 ydrazine and wets polyvinylidene difluoride (PVDF) membranes.

57 of peptides from polyvinylidene difluoride (PVDF)-bound proteins is performed in the presence of non

58 -microplate using polyvinylidene difluoride (PVDF).

59 lene) (PTFE) or poly(vinylidene difluoride) (PVDF), leaving much room for additional research in thes

60 onitrile (PAN), poly(vinylidene difluoride) (PVDF), polytetrafluoroethylene amorphous fluoroplastics

61 ting core/shell poly(vinylidene difluoride) (PVDF)/dopamine (DA) nanofibers (NFs) with a very high be

62 poly(vinylidene fluoride)/dimethylformamide (PVDF/DMF) was used to coat the tip of each fiber to incr

63 penetrates into UiO-66 more easily than does PVDF.

64 this problem, a 3D framework of TiO(2)-doped PVDF\PVP polymer was utilized to self-assemble gold-silv

65 nylidene fluoride-co-hexafluoropropylene) (e-PVDF-HFP) was used as the dielectric layer, despite a th

66 on and polarization phenomena of electrospun PVDF (P)/Nafion (N) blended fiber mats ([P/N(0.9)](M) an

67 ork presents a novel approach to engineering PVDF-based materials with enhanced piezoelectricity and

68 odified poly(vinylidene fluoride) (PVDF) (Er-PVDF) film is developed for converting both mechanical a

69 +) acts to enhance heat transfer into the Er-PVDF film due to its excellent infrared absorbance, whic

70 he use of ferroelectric polymers, especially PVDF and PVDF-based copolymers/blends as potential compo

71 Especially, PVDF-HFP and NaTFSI salt acted as the framework to stabl

72 In the presence of 50% excess PVDF, La(2)NiO(3)F(2) is not obtained from Inter#3 and t

73 generate patterned domains of ferroelectric PVDF within just a few seconds.

74 In this study, polyvinylidene fluoride (PVDF) and nano-porous silica particle were used to fabri

75 In this work, both Polyvinylidene fluoride (PVDF) and PVDF embedded with thermoplastic polyurethane

76 ctive additive, and polyvinylidene fluoride (PVDF) as the binder in N-Methyl-2-pyrrolidone (NMP) solv

77 ere developed using polyvinylidene fluoride (PVDF) as the film-forming polymer in combination with CQ

78 bed AC powder and a polyvinylidene fluoride (PVDF) binder, and the PVDF membrane layer was formed at

79 backsheets based on polyvinylidene fluoride (PVDF) can experience premature field failures in the for

80 cellulose acetate, polyvinylidene fluoride (PVDF) fabricated with polyethylene glycol (PEG) as a por

81 ized in hydrophilic polyvinylidene fluoride (PVDF) filters in a 96-well filter plate.

82 ic polymers such as polyvinylidene fluoride (PVDF) have been widely used for membrane distillation (M

83 ntibodies from aged polyvinylidene fluoride (PVDF) immunoblots at room temperature without removing s

84 partially embedding polyvinylidene fluoride (PVDF) into Bi nanoparticles.

85 bes (MWCNTs) into a polyvinylidene fluoride (PVDF) matrix.

86 ts of a hydrophobic polyvinylidene fluoride (PVDF) membrane and a thin polydopamine/polyethylenimine

87 re excised from the polyvinylidene fluoride (PVDF) membrane blots, hydrolyzed in 20% trifluoroacetic

88 onto amino modified polyvinylidene fluoride (PVDF) membrane has generated a new type of nano-carbon f

89 tration unit with a polyvinylidene fluoride (PVDF) membrane of 40 nm nominal pore size was used to st

90 ary antibody on the polyvinylidene fluoride (PVDF) membrane.

91 ctro-blotted onto a polyvinylidene fluoride (PVDF) membrane.

92 ation of omniphobic polyvinylidene fluoride (PVDF) membranes that repel both water and oil.

93 l onto a commercial polyvinylidene fluoride (PVDF) microfiltration (MF) membrane.

94 as retrofitted with polyvinylidene fluoride (PVDF) microfiltration membrane units, each of which was

95 ties in electrospun polyvinylidene fluoride (PVDF) nanocomposite membranes doped with cerium oxide (C

96 r work, electrospun polyvinylidene fluoride (PVDF) nanofiber mats were investigated while graphene ox

97 ve skin formed on a polyvinylidene fluoride (PVDF) porous nanofiber scaffold via electrospinning.

98 nal binders such as polyvinylidene fluoride (PVDF) require prolonged drying, which slows electrode pr

99 by filtration on a polyvinylidene fluoride (PVDF) support.

100 2MP) functionalised polyvinylidene fluoride (PVDF) track-etched membranes, PB2MP-g-PVDF, was investig

101 re carried out with polyvinylidene fluoride (PVDF) ultrafiltration (UF) membranes and bovine serum al

102 materials involving polyvinylidene fluoride (PVDF), and also discussed both their current advancement

103 flon, refrigerants, polyvinylidene fluoride (PVDF), fire-extinguishing agents, and foams, is a potent

104 RPLC were bound to polyvinylidene fluoride (PVDF).

105 e electrode binder, polyvinylidene fluoride (PVDF).

106 nitrocellulose and polyvinylidine fluoride (PVDF) membranes without being permanently fixed to the m

107 e Er(3+) modified poly(vinylidene fluoride) (PVDF) (Er-PVDF) film is developed for converting both me

108 hybrid polymer of poly(vinylidene fluoride) (PVDF) and hydroxy propyl methyl cellulose (HPMC) in whic

109 (F-MPs), such as poly(vinylidene fluoride) (PVDF) and polytetrafluoroethylene (PTFE), are increasing

110 Poly(vinylidene fluoride) (PVDF) based polymers are attractive for applications for

111 Poly(vinylidene fluoride) (PVDF) is common polymer for electrospinning, however, it

112 hin an insulating poly(vinylidene fluoride) (PVDF) matrix in solution.

113 by spin coating a poly(vinylidene fluoride) (PVDF) solution onto oxygen-deficient films.

114 e transition in a poly(vinylidene fluoride) (PVDF) thin film by leveraging its photothermal effect.

115 lectrics based on poly(vinylidene fluoride) (PVDF)(4-6) have a thermodynamically unstable ferroelectr

116 e titanate (PZT), poly(vinylidene fluoride) (PVDF), 2D materials, and composite materials are introdu

117 La(2)NiO(4) with poly(vinylidene fluoride) (PVDF), targeting the oxyfluorides La(2)NiO(3)F(2) and La

118 Poly(vinylidene fluoride) (PVDF), the most widely used ferroelectric polymer, typic

119 predominantly on poly(vinylidene fluoride) (PVDF)-based fluoropolymers because of their superior per

120 Advancements in poly(vinylidene fluoride) (PVDF)-based polymer ferroelectrics provide flexural, cou

121 l points of view, poly(vinylidene fluoride), PVDF, is one of the most exciting polymers due to its ov

122 nd a fluoropolymer (polyvinylidene fluoride, PVDF) were analyzed in powder raw material forms as well

123 isting of polyvinylidene tri-fluoroethylene (PVDF-TrFE) were prepared to mimic the cell wall's fibril

124 G needle tunnels the dislocation forces for PVDF and PMMA haptic flanges were 0.31 +/- 0.35 N (n = 3

125 G needle tunnels the dislocation forces for PVDF and PMMA haptic flanges were 1.58 +/- 0.68 N (n = 1

126 he highest dislocation forces were found for PVDF haptic flanges and their characteristic mushroom-li

127 t calculation, a sandwich microstructure for PVDF-BaTiO3 nanocomposite is designed, where the upper a

128 or nitrocellulose membrane and in 10 min for PVDF membrane with MemCode stain eraser.

129 are in line, showing better performance for PVDF-GO 1.5 wt.% for almost all concentrations.

130 ms prepared by solid-phase pressure forming (PVDF-SPF) show a giant ECE of up to 12.8 K at 25 degrees

131 that can sort mixture sequences derived from PVDF bands that contain coeluting proteins.

132 -5 mum size range) and for sampling MPs from PVDF and glass microfiber filters, with the latter offer

133 ite membranes of different blend ratios from PVDF and TPU have been synthesized.

134 Furthermore, PVDF demonstrated superior performance with minimal weig

135 Uranyl sorption by PB2MP-g-PVDF membranes was also found to be pH dependent demonst

136 showing that the trapping inside the PB2MP-g-PVDF nanoporous membranes did not change the ion speciat

137 race on-site uranyl monitoring using PB2MP-g-PVDF nanoporous membranes.

138 oride (PVDF) track-etched membranes, PB2MP-g-PVDF, was investigated.

139 olyvinylidene fluoride-co-hexafluoropropene (PVDF-HFP)-coated surfaces were evaluated in this study.

140 vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) thin film that prevents ion exchange and hydro

141 vinylidene fluoride-co-hexafluoropropylene), PVDF-co-HFP, a gelling agent, and ionic liquid 1-Ethyl-3

142 7%) NH(3)-N fluxes were obtained with higher PVDF loadings.

143 A hydrophilic PVDF membrane was selected as a pad material for the tim

144 the average bacterial log removal of the ICE-PVDF increased by approximately 1 log compared to the co

145 critically discusses the latest advances in PVDF and its copolymers, composites, and blends, includi

146 m of the haptic end, non-forceps assisted in PVDF and forceps assisted in PMMA haptics.

147 mer film has been prepared by doping CTAB in PVDF matrix via solution casting method.

148 for screening outdoor failure mechanisms in PVDF backsheets, as they were successful in producing ma

149 promotes the formation of the beta-phase in PVDF, thereby improving its piezoelectric response.

150 licate the increase in crystallinity seen in PVDF after ~ 7 years in the field, but no single-stress

151 y weight% in neat PVDF to 53.9 by weight% in PVDF with 15 by weight% of silica.

152 Increasing PVDF loadings did not impact the electrochemical perform

153 anes were eliminated by introducing an inert PVDF separator of 50 mum diameter that was coiled around

154 t the relative flux drop over GOQDs modified PVDF is 23%, which is significantly lower than those ove

155 er pristine PVDF (86%) and GO-sheet modified PVDF (62%) after 10 h of filtration.

156 Moreover, PVDF-based materials are characterized by excellent chem

157 Moreover, PVDF/SiO2 nano-composite membranes exhibited enhanced an

158 A concentration from 34.8 by weight% in neat PVDF to 53.9 by weight% in PVDF with 15 by weight% of si

159 anced anti-fouling property compared to neat PVDF membrane.

160 al flow reactor for the sequence analysis of PVDF-electroblotted proteins.

161 Given the availability of PVDF, this work opens a route for the development of sca

162 luoride ions and to track the consumption of PVDF.

163 rth ion, Er(3+) with the ferroelectricity of PVDF provides a new and robust approach for delivering s

164 rix solution, peptide-mass fingerprinting of PVDF-bound proteins by MALDI-TOF can be obtained in the

165 characteristics, supports the nucleation of PVDF chains around ceria NPs.

166 fiber diameter and lowered the beta-phase of PVDF nanofibers, consequently lowering the charge transf

167 In addition, poling of PVDF-TrFE, which orients the fiber dipoles and renders t

168 se analysis for different blending ratios of PVDF/TPU.

169 ta sheets content to 61.75% in the sample of PVDF with a ceria 5 wt%.

170 Determinations on samples of PVDF powder were typically below 1 pg/g for (232)Th and

171 particles enhanced the thermal stability of PVDF/SiO2 membranes; increasing the decomposition temper

172 is demonstrated, which has the structure of PVDF nanowires-PDMS composite film/indium tin oxide (ITO

173 adhesion (P<0.01) and activation (P=0.03) on PVDF-HFP were greater than on PtCr.

174 upled radicals reaches 10(15) spins g(-1) on PVDF, accompanied by the generation of ten short-lived r

175 e NH(2) groups on DA and the CF(2) groups on PVDF is responsible for aligning the PVDF chains and pro

176 .84 kDa) it was possible to immobilize it on PVDF by using glutaraldehyde to conjugate the peptide to

177 In contrast, similar studies on PVDF MMMs show that the polymer contacts only a small fr

178 k of rectangular polyvinylidene fluoride (or PVDF) membranes having 0.22 mum pores housed within a mo

179 in discovering weaknesses of the particular PVDF-based outer layer structure studied.

180 or the formation and alignment of beta-phase PVDF, where strong intermolecular interaction between th

181 m/indium tin oxide (ITO) electrode/polarized PVDF film/ITO electrode, and which can individually/simu

182 and electrospinning polyvinylidenefluoride (PVDF) piezoelectric nanofiber tip links.

183 significantly lower than those over pristine PVDF (86%) and GO-sheet modified PVDF (62%) after 10 h o

184 three times of the output generated by pure PVDF.

185 nergy density of 2.44 times that of the pure PVDF polymer.

186 The as-received PVDF/DA NFs exhibit significantly enhanced piezoelectric

187 The resultant PVDF/ceria nanomembrane demonstrated a remarkable maximu

188 miconductors fabricated on a semicrystalline PVDF-HFP with a similar thickness.

189 mbrane consists of a superhydrophobic silica-PVDF composite selective skin formed on a polyvinylidene

190 while consuming 70% less drying energy than PVDF.

191 Here, we report that PVDF films prepared by solid-phase pressure forming (PVD

192 The PVDF is responsible for piezoelectric performance where

193 The PVDF-based backsheet outer layer can have a different st

194 The PVDF-P-CQD membrane exhibits excellent resistance toward

195 The PVDF/GO/q-PMMA-b-PDMAEMA@PVA nanofibers has superhydroph

196 oups on PVDF is responsible for aligning the PVDF chains and promoting beta-phase nucleation.

197 lyvinylidene fluoride (PVDF) binder, and the PVDF membrane layer was formed at the electrode surface

198 using a commercial cartridge containing the PVDF membrane.

199 Ps, which also enhanced UV absorption in the PVDF polymer.

200 from 0 to 1 mM, there was a decrease in the PVDF-BSA and BSA-BSA electrostatic repulsion forces, res

201 lsion forces, which caused a decrease in the PVDF-BSA and BSA-BSA interaction forces accompanied by a

202 dative surface functionalization narrows the PVDF band gap and bolsters its oxidative potential by 5-

203 to enhance the piezoelectric response of the PVDF/TPU nanocomposite mats.

204 -93% lower on the ICE anode than that on the PVDF after filtration, and BW further reduced the densit

205 tected the presence of OPBM displayed on the PVDF and correctly identified the RPLC fraction containi

206 loyed to obtain mechanical vibrations on the PVDF cantilever under small thermal gradient.

207 method was used to form AgNPs in and on the PVDF coating layer.

208 aining tagged amino acids are visible on the PVDF membrane and can be excised for direct sequence ana

209 ll amount of peptide that passed through the PVDF membrane during a collection of peptides for N-term

210 Compared to the PVDF-free control, the optimized Bi-PVDF catalyst exhibi

211 at Ce was successfully incorporated with the PVDF chain.

212 led a fibrous CNT network blended within the PVDF polymer matrix and distinct graphite flakes, ensuri

213 lowed by pH adjustment and filtering through PVDF filters.

214 The addition of Er(3+) to PVDF is shown to improve piezoelectric properties due to

215 le gel, one lane of which was transferred to PVDF membrane and probed with the XAP-1 antibody.

216 e charge was imparted to an alkaline-treated PVDF membrane by aminosilane functionalization, which en

217 This ultrasensitive PVDF with a ceria 5 wt% nanogenerator demonstrated prono

218 In vivo, PVDF-HFP revealed more neointimal area (P<0.01) and resi

219 d-aged samples from Arizona and India, where PVDF crystallizes in its predominant alpha-phase, the de

220 .9) dissolving completely within 24 h, while PVDF (RED = 1.9) and PBI (RED = 1.1) maintained structur

221 f endothelial surface coverage compared with PVDF-HFP surfaces.

222 sion at 7 and 14 days (P=0.02) compared with PVDF-HFP.

223 Johnson, USA) and ten three-piece IOLs with PVDF haptics (PU6AS, KOWA, Japan) were each heated for 1

224 MXene/polyvinylidene fluoride (Ti(3)C(2)T(x)/PVDF) nanofiber composite is presented.

225 onium nitride/poly(vinylidene fluoride) (ZrN-PVDF) composite membrane, has been demonstrated for sola