ライフサイエンスコーパス: fabricate

1 hich are often bulky, lossy and difficult to fabricate.

2 tioning after 10 000 cycles of stretching is fabricated.

3 hydrochloride and FDA-approved polymers are fabricated.

4 witchable organic thin-film transistors were fabricated.

5 the regenerated silk fibroin is designed and fabricated.

6 rst, the nanoporous anodic alumina (NAA) was fabricated.

7 inar morphology and ultrathin thickness were fabricated.

8 ) in plasma and finger-prick whole blood was fabricated.

9 nt of a simple and cost-effective method for fabricating ~10 nm scale nanopatterns over large areas i

10 techniques for preventing the restacking by fabricating 2D-0D, 2D-1D, and 2D-2D layer-by-layer compo

11 We fabricated 3D-hierarchical sensor interfaces composed of

12 ), into the PLLA bioengineered ACL matrix to fabricate a "tiger graft." The tiger graft demonstrated

13 posited on SiO(2)/Si substrates were used to fabricate a backgated Field Effect Transistor (FET) devi

14 The workflow was developed to design and fabricate a bespoke device for this patient with no viab

15 Here we fabricate a ferroelectricity-modulated photodetector bas

16 ed an acrylamide analogue, which was used to fabricate a fluorescent poly(2-hydroxylethyl methacrylat

17 th specially designed interior structures to fabricate a microfluidic device with high surface area a

18 In this paper we fabricate a micrometer-size graphene-based sensor to mea

19 rve as a guideline to researchers who aim to fabricate a nanotechnology-assisted LC materials-based b

20 graphy-based 3D printing strategy is used to fabricate a novel miniaturized modular microcage scaffol

21 philic triblock copolymer, Pluronic F127, to fabricate a self-healing photosynthetic protein photoele

22 ecular strategy-based linkage engineering to fabricate a versatile 2D hydrazone-linked COF platform f

23 Herein, we have fabricated a cellulose-based wearable patch, which furth

24 We designed and fabricated a CFE device with one side made of quartz and

25 strate the sensor concept experimentally, we fabricated a microfluidic device with 10 distributed Cou

26 We designed and fabricated a new scaffold exhibiting (1) high tensile st

27 We have successfully fabricated a potential smart window device after the opt

28 and homogeneous electrochemical detection by fabricating a high-affinity bispecific AEC (bsAEC) using

29 proach has been adopted here for this (1) by fabricating a working device in cross bar geometry follo

30 idge dimensions were measured using a custom-fabricated acrylic stent.

31 ons were again measured using the previously fabricated acrylic stents and a bone core sample of the

32 pose-built interphases on Li, as well as for fabricating advanced Li electrode architectures for regu

33 eported a convenient and universal method to fabricate AECs using the SpyCatcher/SpyTag system.

34 The aim is to fabricate an amperometric biosensor for phenolic compoun

35 This study aimed to fabricate an efficient drug-delivery system to reduce th

36 ation, immobilization, and modularization to fabricate and assemble hydrogel-based microreactor assem

37 cci fibers are simple and straightforward to fabricate and have a rich set of properties that are of

38 zed systems require significant expertise to fabricate and operate, which has greatly limited impleme

39 ess per weight, but have been challenging to fabricate and test experimentally.

40 This novel platform can be fabricated and assembled in days and can be used repeate

41 Here, we designed, fabricated and characterized the first biochemical and c

42 InGaN blue light-emitting diodes (LEDs) were fabricated and compared the performance with those of LE

43 An all-fiber-based soft sensor is fabricated and tested on human skin and in vivo in mice.

44 -based reverse iontophoresis electrodes were fabricated and used instead of a conventional silver wir

45 n in vitro model of early atherosclerosis by fabricating and perfusing multi-layer arteriole-scale hu

46 tion peaked at different angles is designed, fabricated, and tested.

47 n and stencil printing are both suitable for fabricating antennas; these different techniques are mos

48 Finally, the fabricated aptasensor is successfully applied to measure

49 t unexpected piezoelectric-like response are fabricated, as MoO(2) is centrosymmetric and should not

50 lack multimodal sensing or are difficult to fabricate at large scale.

51 ided highly reproducible data, was simple to fabricate at low cost, exhibited higher sensitivity than

52 -source automated liquid handler that can be fabricated at a cost of $1,500 using off-the-shelf and 3

53 time, hollow fiber and monolithic fiber were fabricated based on metal-organic framework deep eutecti

54 Here, 3D conductive scaffolds are fabricated based on printed microfiber constructs using

55 The PSCs are then fabricated before applying a range of pressures to the d

56 speed, offering a sophisticated approach to fabricate bespoke medical devices and drug delivery syst

57 The analytical performance of fabricated biosensor has been evaluated using EIS, where

58 ay ionisation process and deposition and the fabricated biosensor has improved performances in terms

59 ons and hydroxide ions is important both for fabricating bipolar membranes (BPMs) that can couple dif

60 a supramolecular-synthon-driven approach to fabricate Borromean linked organic polymer.

61 d demonstrates unprecedented versatility for fabricating both static and dynamic nanostructures.

62 led processing, nanocellulose can be used to fabricate broadband photonic reflectors, thermally super

63 , we report on a newel three-step process to fabricate bulk high-entropy nitrides.

64 The fabricated bulk high-entropy nitride (Hf(0.2)Nb(0.2)Ta(0

65 The bioscaffold is fabricated by 3D-bioprinting of an in situ phosphate cro

66 The imaging module was fabricated by a 3D printer, equipped with UV-LED lamps a

67 ible, designable micro-supercapacitor can be fabricated by a single pulse laser photonic-reduction st

68 Ca-silicate (CSi) bioceramic scaffolds were fabricated by additive manufacturing and then modified f

69 igh resolution flexible scintillators can be fabricated by blending (C(38)H(34)P(2))MnBr(4) powders w

70 Probe 1 is fabricated by coating 50 nm Ag film on unclad optical fi

71 nthetic polymeric particles were effectively fabricated by combining modern technologies of artificia

72 capacity and high antibiofouling activity is fabricated by compositing BP nanosheets into polyacrylam

73 HD/Se gel was fabricated by covalent bonding of dopamine group (in HD

74 The uPAD was fabricated by designing and embedding wax channels onto

75 The structure, fabricated by direct laser writing and electroless silve

76 The nanosheets were fabricated by electrochemical deposition of nickel-cobal

77 The gel probe, which is fabricated by electrodeposition of hydrogel on a microdi

78 The multi-sensor consists of metal fibers fabricated by electrospinning and electroplating.

79 ate, both containing sunflower oil (SO) were fabricated by freeze drying technique.

80 The immunosensor was fabricated by immobilizing the virus nucleocapsid (N) pr

81 unclad optical fiber portion and Probe 2 is fabricated by modifying Ag film with GO for sensitivity

82 ansdermal core-shell microneedles-which were fabricated by the micromoulding and alignment of vaccine

83 Wood-based materials, fabricated by top-down or bottom-up approaches, possess

84 Here, we fabricate, calibrate, and test a fibronectin (FN)-based

85 propylacrylamide) (PNIPAm) is widely used to fabricate cell sheet surfaces for cell culturing, howeve

86 r main objective in the current study was to fabricate Cellulose Acetate/Gelatin (CA/Gel) electrospun

87 Hence, the fabricated champion device-1(c): Glass/FTO/c-TiO(2)/mp-T

88 rimental measurements and simulations of the fabricated circuits are in good agreement.

89 inting has emerged as an advanced method for fabricating complex 3D tissues.

90 has emerged as a promising new approach for fabricating complex biological constructs in the field o

91 Here, a one-step strategy for fabricating core/shell poly(vinylidene difluoride) (PVDF

92 ting has emerged as a potential approach for fabricating customizable IVRs and IUDs.

93 ualize the metatarsus and vasculature and to fabricate customized scaffolds and surgical guides by 3D

94 inting has become an available technology to fabricate customized tissue engineering scaffolds with d

95 This simply fabricated DDS may find applications in high effective c

96 spraying methods are promising techniques to fabricate delivery vehicles.

97 dhesives (OSP + 25% or 30% of N_TiO(2)) were fabricated, desiccated (37 degrees C) and tested for SOR

98 Almost 84% of the fabricated devices showed rectification behavior demonst

99 ich govern microelectronic properties of the fabricated devices such as charge carrier mobility (u),

100 To study the electronic properties of the fabricated devices, current-voltage (I-V) measurements a

101 ads to a irregular signals from individually fabricated devices.

102 the surface potential was registered by the fabricated devices.

103 Prior efforts to fabricate dissolving undercut microstructures were limit

104 The wound healing efficacy of the fabricated dressings was evaluated in streptozotocin-ind

105 The fabricated electrode was evaluated for its electrochemic

106 mprove the IMI sensing performance of the as-fabricated electrode.

107 multi-confined carbon dots were designed and fabricated, enabling room temperature phosphorescence ma

108 One possible development is to fabricate fibers by spinning filaments from nanocellulos

109 r high-porosity rocks and can be adopted for fabricated foam-like materials with similar properties.

110 phene) hybrid nanostructure was proposed and fabricated for DNA hybridization detection.

111 article encapsulated core-shell hydrogel was fabricated for simultaneous iron overload clearance and

112 lymer (MIP)-based electrochemical sensor was fabricated for the determination of azithromycin, a broa

113 h charge embedded in their bulk matrices are fabricated for the first time (i.e., via polymerizing th

114 We have fabricated [Formula: see text] preferred-oriented Au thi

115 ), compared to the results of conventionally fabricated [Formula: see text] tunnel barriers in previo

116 sonators with high quality factors have been fabricated from aluminum films, suggesting potential app

117 NETs (~90 nm diameter) were fabricated from hemoglobin-depleted mice erythrocyte-gho

118 The Pickering emulsion is fabricated from Pd-supported silica nanoparticles, azobe

119 Photovoltaic devices fabricated from perovskite absorbers have reached power

120 Composites were fabricated from polycaprolactone (PCL) fibers surroundin

121 Devices are readily fabricated from single vapor-phase grown crystals and ex

122 Thin films of the compound readily fabricated from solutions exhibit the same optical prope

123 The field-effect transistors fabricated from the full-coverage films show high mobili

124 e-metal/ferroelectric/oxide-metal structures fabricated from the released membranes.

125 mechanism allows a simple one-step route for fabricating functionally graded materials by controlling

126 esent study, we evaluated the feasibility of fabricating grapefruit-peel-phenolic (GPP) nano-emulsion

127 ently, a unique one-step method for directly fabricating green and brown films has been developed.

128 In particular, we fabricate greyscale and dual-tone nanopatterns with full

129 In this study, we fabricate grid poly (epsilon-caprolactone)-poly (ethylen

130 erials and digital printing technologies for fabricating haptic actuators is provided.

131 tal-growth-dominated strategy is proposed to fabricate hierarchically porous MOFs (HP-MOFs).

132 strates the possibility for spray-coating to fabricate high efficiency and low-cost perovskite solar

133 of microstructure development is required to fabricate high quality products by additive manufacturin

134 lms have been investigated systematically to fabricate high-efficient thermal energy harvesting devic

135 ter-surface drag coating, is demonstrated to fabricate high-quality OSC thin films with greatly enhan

136 We fabricated high-quality sodium films with electron relax

137 way for customizable pH sensors that can be fabricated in (nearly) any geometry for targeted applica

138 Three-dimensional mouse iPSC constructs were fabricated in a day using U-bottom 96-well plates, and w

139 Ta(0.5)O(3) EC multilayer ceramic capacitors fabricated in a manufacturing-compatible process.

140 raphene, a variety of 2D materials have been fabricated in a quest for a tantalizing combination of p

141 Yb(3+) ions coupled to a nanophotonic cavity fabricated in an yttrium orthovanadate host crystal.

142 Moreover, HAMLs can be fabricated in low-refractive index materials using multi

143 t])-based single-electron transistors (SETs) fabricated in ultra-high vacuum (UHV) chambers using in

144 was developed using a microlithographically fabricated Individually Addressable Microband Electrode

145 cal-radical cross-coupling reaction on micro-fabricated interdigitated electrodes, and 2) measurement

146 emerging sustainable applications and being fabricated into high-performance structural materials th

147 This approach is demonstrated by fabricating intricate cell patterns with pre-defined fea

148 However, fabricating intrinsically stable SACs on traditional sup

149 konjac glucomannan, together with simple-to-fabricate iron-based metal-organic framework-derived pho

150 g vapor-liquid-solid reaction is proposed to fabricate large-grain, continuous MoS(2) films.

151 t the need for any actuation are realized by fabricating LIG actuators at an elevated temperature.

152 we demonstrate a simple and novel method to fabricate low-cost THz microstructured fibers.

153 The fabricated LRSPR sensor was also evaluated to detect uri

154 This review will highlight methods used to fabricate luminescent COFs and discuss the factors that

155 the sensors are extremely cheap and easy to fabricate, making them highly accessible to a wide range

156 In contrast to artificially fabricated materials and devices, biological-friendly ma

157 d to mimicking motions of natural creatures, fabricating mechanochromic systems with programmable col

158 show that these benefits can be leveraged to fabricate micromesh implants that are loaded with tumour

159 We fabricate micrometer-scale devices from graphene encapsu

160 en combined with insulated stencil masks for fabricating micropatterns by spraying solutions containi

161 recently, 3D printing has been introduced to fabricate molds for soft lithography, the only step for

162 The fabricated monoliths were successfully used to separate

163 ous advances in recent years in the arena of fabricating multifunctional, three-dimensional (3D) tiss

164 One way to increase the efficiency is by fabricating multijunction solar cells, which can split t

165 We design and fabricate multilayered morphing electronics, consisting

166 ntal realization using photolithographically fabricated multilevel phase layers demonstrates the pred

167 The fabricated MWAC promotes our ability to quantify the con

168 This study shows that the fabricated Nafion/SWCNT sensor has potential to be appli

169 a long time as naturally derived and simply fabricated nano(micro)-sized materials able to effective

170 rface area), it was used in the structure of fabricated nano-adsorbent.

171 Finally, the antioxidant properties of fabricated nanoparticles were investigated in mayonnaise

172 (TMD) highlights the superior potential of a fabricated nanosensor for bacterial toxin detection.

173 green lixiviant and subsequently utilized to fabricate new batches of LiCoO(2) (LCO) coin cell batter

174 have potential to serve as mini-reactors for fabricating new materials, but this has been exploited l

175 trol light-matter interactions and therefore fabricate next-generation paints and coatings.

176 discrimination without external heating, are fabricated on 4 in. wafer-scale substrates.

177 ensor, a pH sensor, and a glucose sensor was fabricated on a flexible polyimide substrate with thickn

178 ns (MTJ), with magnetostrictive soft layers, fabricated on a piezoelectric film.

179 The device is first fabricated on a planar Si wafer at the microscale and th

180 The MIS structured sensor was fabricated on a silicon substrate using Ag-SnO(2) as sen

181 EGMEA, M(n) 480), and acrylate-PEG(2000)-NHS fabricated on a substrate coated with 9.5 nm of titanium

182 nspired by the antibody paratope region, was fabricated on a surface plasmon resonance (SPR) sensor c

183 arranged in a honey-cell configuration, and fabricated on a thin sheet of an FR4 dielectric substrat

184 ellurium p-type field-effect transistors are fabricated on a wide range of substrates including glass

185 article resolution to the entire film can be fabricated on diverse surfaces.

186 Field effect transistors fabricated on molecularly thin Ruddlesden-Popper perovsk

187 (4)) nanosheets with a porous structure were fabricated on nickel foam as a working electrode for sup

188 Using a time-delayed microfluidic strategy fabricated on paper, an automated and precisely sequence

189 ide (AlN)-based conformable SAW immunosensor fabricated on recyclable polyethylene naphthalate.

190 um oxide (TiO(2)) nanoparticulate thin films fabricated on silica and Indium Tin Oxide (ITO) substrat

191 s of AD by utilizing Si TL NW FET structures fabricated on the basis of cost-efficient CMOS-compatibl

192 In this study, platinum electrodes were fabricated on the bio-based poly(ethylene terephthalate)

193 hich is in great contrast to the transistors fabricated on the same WSe(2) flake using conventional d

194 lyaniline (PANI) nanocomposite-interface was fabricated on the screen-printed carbon-microelectrode (

195 ines on an array of 11 x 11 circular patches fabricated on the top layer of the GaAs substrate and me

196 um-black electrodes with nanoscale roughness fabricated on top of a silicon chip that monolithically

197 are few materials that are broadly used for fabricating optical metasurfaces for visible light appli

198 construct; the fiber spacing is adjusted to fabricate optimal construct that simulates the stromal s

199 cation of a novel workflow for designing and fabricating orthoses, using a combination of 3D scanning

200 Such a strategy can also be utilized to fabricate other ultrathin oxides, opening up an avenue i

201 Mesoporous 2D superstructures can be fabricated over macroscopic film dimensions and stacked

202 The devices are fabricated, packaged, and released in parallel using pho

203 istribution; second, one may mimic nature to fabricate patterned porous membranes as the support, so

204 In this work, we designed and fabricated Pd/Au bimetallic thin film electrodes with is

205 We have installed a custom-fabricated PET insert into our small-animal MRI instrume

206 The fabricated pixels also offer twice the luminescence effi

207 The fabricated poly(epsilon-caprolactone) (PCL)/Ade-polyviny

208 ecular tubisomes pave an alternative way for fabricating polymeric tubular structures, and will expan

209 enables a feasible and economical method to fabricate programmable 2D patterns of chiral PDA with ta

210 arge transport provides great opportunity to fabricate promising sensing materials.

211 Experimental results conducted with the fabricated prototypes showed a good agreement with the s

212 (QD) layers is an important prerequisite for fabricating QD light-emitting diode (QLED) displays and

213 is room-temperature gas sensing array can be fabricated reproducibly and at low cost, making it an at

214 ort the utility of cell sheet technology for fabricating scaffold-free, hyaline-like cartilage constr

215 The desired performance of the fabricated sensor is practically validated through in-vi

216 of our [Formula: see text]-based devices, we fabricate SETs with sub-1 e charge sensitivity and utili

217 ance energy transfer process is successfully fabricated, showing an energy transfer efficiency up to

218 The fabricated silver nanorods show single-crystal structure

219 nderson-Evans polyoxometalate and used it to fabricate single-molecule junctions, using the organic t

220 ted epitaxial-growth-and-transfer method for fabricating single-crystal hybrid perovskites on arbitra

221 Nano-fabricated smart drug delivery systems and implantable d

222 ined, narrow spaces, inspiring scientists to fabricate soft robots for in vivo manipulation of cells

223 laments (Lay-Fomm, Gel-Lay, and Lay-Felt) to fabricate solid phase extraction (SPE) columns for the e

224 ioprinting has expanded the possibilities of fabricating sophisticated microvascular systems by enabl

225 In addition, the fabricated SPR sensor showed good selectivity for the ta

226 remains challenging due to the difficulty in fabricating stoichiometric and high-quality films.

227 e device consists of electrohydrodynamically fabricated submicrometre pillars covered with a plasmon-

228 of targets, but it has proven challenging to fabricate suitable three-electrode systems on paper.

229 -derived polymers, and their exploitation to fabricate sustainable, responsive soft photonic objects.

230 te (Li(6.5) La(3) Zr(0.5) Ta(1.5) O(12) ) to fabricate symmetric cells, which exhibit stable Li strip

231 ures, is common in nature and widely used to fabricate synthetic biomaterials.

232 Here, we fabricated tall synthetic trees where water ascends up a

233 The fabricated Targeted Micellar Nanoprobe (TMNP) had except

234 Two active metamaterial structures are fabricated that, despite still having their power source

235 l considerations were employed to design and fabricate the module.

236 In this study, we fabricated the surface-enhanced Raman scattering (SERS)-

237 vel system (TLS) defects, and secondarily to fabricating the devices entirely within a UHV system.

238 that PETG can be an excellent substrate for fabricating the electrode.

239 d along with the need for ores and metals to fabricate them.

240 Micromilling of thermoplastics was used to fabricate these microstructures in a rapid, moldless fas

241 We have also succeeded in fabricating thin films that exhibit a large ANE at zero

242 l properties to many other conductive fibers fabricated through different approaches.

243 n abraded heterostructures compared to those fabricated through inkjet printing of nanocrystal disper

244 To fabricate tissue constructs that are useful in replicati

245 lectrochemical biopsy probe was designed and fabricated to detect cancer tumors under the sonography

246 itting diodes (LEDs) and bandpass filters is fabricated to excite as well as read the scleral sensor.

247 nchored selenium nanoparticles (G@SeNPs) are fabricated to investigate the effect of their chirality

248 where the wrinkles are usually designed and fabricated to provide distinct functionalities.

249 Pressure molded stents were fabricated to serve as a reference for probing depth and

250 idative chemical vapor deposition is used to fabricate transparent and conformal wrap-around p-type c

251 Polymers are commonly used to fabricate triboelectric nanogenerators (TENGs).

252 ght-matter systems offer the possibility for fabricating tunable optical devices that are robust agai

253 and requires no electricity), can be easily fabricated using 3D printing, and delivers repeatable ex

254 5 mm length, 3 mm width and 1 mm depth) were fabricated using a 3D-printer, and magnetic ZIF-4 was fi

255 The nanoparticles are fabricated using a cell membrane coating derived from ca

256 Pure CSi scaffolds were fabricated using a direct ink writing technique, and the

257 A biosensor for androstenone was fabricated using a Meldola's Blue modified SPCE (MB-SPCE

258 The polyurethane nanoparticles were fabricated using a single emulsion and mixed organic sol

259 e-1,2,4,5-tetracyanobenzene (NAPH-TCNB) were fabricated using a surfactant-mediated co-reprecipitatio

260 is letter we report a diamond lateral FinFET fabricated using an ohmic regrowth technique.

261 imensions down to 100-micrometers are easily fabricated using available laboratory equipment.

262 Porous PLA film, was fabricated using calcium carbonate nanoparticles to enha

263 reasing heights of 220, 360, and 420 nm were fabricated using deep UV immersion lithography.

264 enna was designed at Ka-band (26-40 GHz) and fabricated using fused deposition modeling (FDM) based a

265 thermore, membrane electrode assemblies were fabricated using H(3) PO(4) @COFs as the solid electroly

266 ncement of salt-rejecting dense NF membranes fabricated using layer-by-layer assembly of polyelectrol

267 The columns are fabricated using microelectromechanical systems (MEMS) t

268 ic and undoped topological insulator layers, fabricated using molecular beam epitaxy.

269 The glass iMFP, fabricated using photolithography, wet etching, and poli

270 m-contact organic thin film transistors were fabricated using PSBBB as dielectric, affording a perfor

271 The multiple nanoslit sensing arrays were fabricated using the compression-injection molding proce

272 The tip is fabricated using the free radical polymerization.

273 can be designed for individual patients and fabricated using the patient's own cells.

274 e photoluminescence quantum yield of the PDS fabricated using these QDs exceeds 70%.

275 The Al-based QSs fabricated using ultrashort pulsed laser are of two dist

276 e developed a general host-guest strategy to fabricate various metal single-atom catalysts on nitroge

277 hlight cases that utilize MOF instability to fabricate varying materials including hierarchically por

278 micked, analyzed by finite element modeling, fabricated via additive manufacturing, and mechanically

279 The antifouling surface was fabricated via electrodeposition using an equivalent mix

280 ble glucose-responsive polymeric matrix, and fabricated via in situ photopolymerization, regulated bl

281 Carbon plate-nanolattices are fabricated via two-photon lithography and pyrolysis and

282 nofibers electrodes with a net structure are fabricated via using lithography and wet etching.

283 e the concept of "trapped air" metamaterial, fabricated via vat photopolymerization, which makes ultr

284 pM, respectively) were successfully used to fabricate voltammetric diagnostic assay via immobilizati

285 Also fabricated was a nanohybrid material by using S-rGO with

286 Thin-film OFETs fabricated with 1 and 2 both exhibited hole mobility of

287 nce MoS(2) field-effect transistors on paper fabricated with a "channel array" approach, combining th

288 The devices were fabricated with a restively shunted Nb/AlO(x)-Al/Nb proc

289 Flexible photodetector arrays fabricated with an optimum CsBr/KBr treatment demonstrat

290 emperature of 400 degrees C when samples are fabricated with anatase and rutile target materials.

291 crystals, these cluster-based devices can be fabricated with atomic precision.

292 inally, piezocapacitive pressure sensors are fabricated with high pressure sensitivity and rapid resp

293 Hybrid channels were fabricated with no specialized equipment except a commer

294 s: High-resolution PET detector modules were fabricated with single-ended readout of polished multicr

295 n organic light-emitting diode (OLED) device fabricated with the macrocycle compound as the emitter h

296 Also, pouch cells fabricated with the MoB additive deliver an ultrahigh di

297 a C-AFM tip is used as the top contact, were fabricated with total layer thicknesses fixed at 2-3 nm

298 and stabilities superior to those of devices fabricated without NHE.

299 A novel benchtop approach to fabricate xurography-enabled thermally transferred (XTT)

300 subsequent thermal reduction is proposed to fabricate yolk-shell Sb@C nanoboxes embedded in carbon n