ライフサイエンスコーパス: indium tin oxide

1 d by conductive inorganic materials (such as indium tin oxide).

2 ies are comparable to those fabricated using indium tin oxide.

3 sited bismuth telluride thin films, grown on indium tin oxide.

4 ance and yield become close to devices using indium tin oxide.

5 laser pulses on a subwavelength thin film of indium tin oxide.

6 ransmittance (T(550) > 80%), which can rival indium tin oxide.

7 h at least a similar workfunction to that of Indium Tin Oxide.

8 printed on chips coated with either gold or indium-tin oxide.

9 the corresponding parameters for commercial indium-tin oxide.

10 smittance > 70%) that are rivalling those of indium-tin oxide.

11 ighly conductive, transparent amorphous zinc indium tin oxide (a-ZITO) electrodes.

12 (TOI) gate dielectric with an amorphous zinc-indium-tin oxide (a-ZITO) transparent oxide semiconducto

13 d quartz, and to conductor supports, such as indium tin oxide, aluminum, highly ordered pyrolytic gra

14 -donating P3HT and even inorganic materials, indium tin oxide and gold, showed similar electrical pot

15 g the composite thin film sandwiched between indium tin oxide and indium-gallium eutectic alloy exhib

16 l TCEs that are most frequently comprised of indium tin oxide and show further advantages of flexibil

17 ransparent conducting oxides (TCOs), such as indium tin oxide and zinc oxide, play an important role

18 stals of other functional materials, such as indium tin oxide and zinc-doped ferrite.

19 GZO) and copper oxide, as well as conducting indium-tin oxide and copper metal.

20 omposites such as aluminum-doped zinc oxide, indium tin oxide, and platinum/aluminum-doped zinc oxide

21 A novel titanium/indium tin oxide annealed alloy is exploited as transpar

22 y >10(10) cm(-2) at the interface between an indium tin oxide anode and the common small molecule org

23 0%) than other transparent materials such as indium tin oxide ( approximately 80%) and ultrathin meta

24 ctionalized cerium oxide nanoparticle coated indium tin oxide as a working electrode to observe the e

25 ks are considered a promising alternative to indium tin oxide as transparent conductors.

26 rodes made from graphene (at the bottom) and indium tin oxide (at the top) for dielectrophoretic cell

27 We present indium-tin-oxide-based photocurrent measurements that re

28 stacks of naphthalenediimides were grown on indium tin oxide by ring-opening disulfide-exchange poly

29 We report that indium tin oxide can acquire an ultrafast and large inte

30 rent limit of transparent conductors such as indium tin oxide, carbon-nanotube films, and doped graph

31 trochemical cell comprising an fcc3-modified indium tin oxide cathode linked to a cobalt phosphate-mo

32 ES) and electrophoretically deposited on the indium tin oxide coated glass substrate at a low DC pote

33 ameter = 8 to 50 nm) to amine-functionalized indium-tin oxide coated glass electrodes (Glass/ITO), ob

34 er well made from polydimethylsiloxane on an indium-tin oxide coated microscope slide.

35 dmium-telluride quantum dots (CdTe-QDs) onto indium-tin-oxide coated glass substrate.

36 on of an external potential to a transparent indium tin oxide-coated electrode (the substrate), which

37 ameter citrate-stabilized (cit) Au NPs using indium tin oxide-coated glass electrodes (glass/ITO) by

38 diameter Au nanoparticles (NPs) attached to indium tin oxide-coated glass electrodes in Br(-) and Cl

39 sed for CRP recognition on silicate-modified indium tin oxide-coated glass electrodes.

40 s of spin-coated polyaniline (PANI) films on indium tin oxide-coated glass slides that were subjected

41 lide perovskite photocathodes deposited onto indium tin oxide-coated polyethylene terephthalate achie

42 f colloids generated by photochemistry at an indium tin oxide-coated substrate.

43 el and two electrodes and were fabricated on indium tin oxide-coated substrates (e.g., polyester) sim

44 e consisting of a platinum catalyst layer on indium-tin oxide-coated glass by the application of two

45 trate-stabilized Au nanoparticles (NPs) onto indium-tin-oxide-coated glass (glass/ITO) electrodes as

46 hose with sputtered intrinsic zinc oxide and indium tin oxide contacts.

47 oxide/3-aminopropyl-triethoxysilane modified indium tin oxide electrode (ITO/APTES/GO/HSA) has been d

48 Here, we show that an inverse opal-indium tin oxide electrode hosts a large population of c

49 upon the oxidative polarization of an inert indium tin oxide electrode in phosphate-buffered water c

50 Each microfabricated indium tin oxide electrode is located in a separate micr

51 After sedimentation on an indium tin oxide electrode material, the opening of lipo

52 oxy-substituted polythiophene polymer coated indium tin oxide electrode was used for the determinatio

53 Ag nanoparticles (NPs) at the surface of an indium tin oxide electrode.

54 aposed within the 5-100 nm scale pores of an indium tin oxide electrode.

55 ed polythiophene polymer modified disposable indium tin oxide electrode.

56 molecules onto a gold-nanoparticle-patterned indium tin oxide electrode.

57 oped a tailor-made hierarchically structured indium-tin oxide electrode that gives rise to the excell

58 generation QS, as probed on 3D-inverse opal indium tin oxide electrodes at 8.5 sun irradiance (lambd

59 n the open circuit potential of graphite and indium tin oxide electrodes by >100 mV.

60 In contrast, P450 BM3 adsorbed on unmodified indium tin oxide electrodes revealed 36% activity by ele

61 Gold and indium tin oxide electrodes were characterized with resp

62 Indium tin oxide electrodes were modified with DNA, and

63 These PCR fragments were immobilized to indium tin oxide electrodes, and oxidation of guanine in

64 m spin-coated films of lipids on transparent indium tin oxide electrodes, we formed two-dimensional n

65 re two substrates to act as scaffold for the Indium Tin Oxide electrodes, which restricts the device

66 lled electrodeposition protocol on activated indium-tin oxide electrodes (ITO), producing conformal f

67 nd-epoxy matching layers with low-resistance indium-tin-oxide electrodes through a brass-ring based s

68 ucer are composed of a gold electrode and an indium tin oxide film with micrometer separation with a

69 The conducted experiments with a 10 nm indium tin oxide film, having plasmonic resonance in the

70 NADP(+) reductase in a nanoporous conducting indium tin oxide film, IDH1 carries out the complete ele

71 e-varying interface between air and a 310 nm Indium Tin Oxide film.

72 Epitaxial indium tin oxide films have been grown on both LaAlO3 an

73 ance of graphene is much higher than that of indium tin oxide films, especially at large incident ang

74 cell assembled on a polyethylene naphthalate-indium tin oxide flexible substrate with a PCE of 3.12%

75 Indium-tin-oxide-free transparent anode technologies sho

76 ned electrode is shown to perform as well as indium-tin oxide glass.

77 s were electrophoretically deposited onto an indium-tin-oxide glass substrate and used for immobiliza

78 than a control diode fabricated on the rigid indium tin oxide/glass substrate.

79 ce on different conductive surfaces, such as indium tin oxide, gold film, and stainless steel electro

80 of the material on various surfaces (glass, indium tin oxide, gold) was evaluated with the tape peel

81 Alternatives to indium tin oxide have recently been reported and include

82 ted on graphene electrodes has out-performed indium tin oxide in power conversion efficiency (PCE).

83 ansmittance comparable to that of commercial indium tin oxide in the visible spectrum, but far superi

84 immobilizing anti-E. coli antibodies onto an indium-tin oxide interdigitated array (IDA) microelectro

85 wed interest as an anode material to replace indium tin oxide, is calculated to be a two-dimensional-

86 of dielectric nanowires, made of silicon and indium tin oxide, is reversibly structurally deformed un

87 duced the electron injection barrier between indium tin oxide (ITO) and C70 by 0.67 eV.

88 evices fabricated from these complexes using indium tin oxide (ITO) and gold contacts appears to be d

89 rent conductive oxides includes the material indium tin oxide (ITO) and has become a widely used mate

90 ible organic solar cells is proposed without indium tin oxide (ITO) and poly(3,4-ethylenedioxythiophe

91 fabricated by a self-alignment of conducting Indium Tin Oxide (ITO) and rGO layer without etching of

92 h efficiency solar cells, on semitransparent indium tin oxide (ITO) and titanium dioxide (TiO2) elect

93 The technique is tested with Indium Tin Oxide (ITO) and with poly(3-hexylthiophene) (

94 Indium and indium tin oxide (ITO) are extensively used in electroni

95 sparency, slides coated with a thin layer of indium tin oxide (ITO) are the standard substrate for pr

96 Silver (Ag) metal and indium tin oxide (ITO) are used for the fabrication of t

97 e (MgF(2)) as a matching layer before adding indium tin oxide (ITO) as a lossy mode excitation layer

98 FDH and a H(2)ase immobilized on conductive indium tin oxide (ITO) as an electron relay.

99 In this context, we used optical transparent indium tin oxide (ITO) as electrode material.

100 intain optical transparency by incorporating Indium Tin Oxide (ITO) as the conductive element in each

101 face and enzyme coated NPs were deposited on indium tin oxide (ITO) coated flexible polyethylene tere

102 -cMWCNTs) deposited electrophoretically onto indium tin oxide (ITO) coated glass electrode and have b

103 HeLa cells were grown directly on indium tin oxide (ITO) coated glass slides.

104 in film of NiO nanoparticles deposited on an indium tin oxide (ITO) coated glass substrate serves as

105 on the same Au nanoparticle (AuNP)-modified indium tin oxide (ITO) coated glass surfaces.

106 ity transparent conductive electrode film of indium tin oxide (ITO) coated on the interface of total

107 oxidase (GOx) was immobilized on a modified indium tin oxide (ITO) coated polyethylene terephthalate

108 based on carbon felt covered by a mesoporous indium tin oxide (ITO) coating.

109 electrode show superior efficiency to their indium tin oxide (ITO) counterparts because of improved

110 The electrodes were indium tin oxide (ITO) covered with a thin layer of poly

111 to understand thin film delamination from an indium tin oxide (ITO) current collector under cyclic lo

112 eters thick) were formed on quartz glass and indium tin oxide (ITO) directly from Nafion-[Ru(bpy)3]2+

113 ynechococcus elongatus , on a nanostructured indium tin oxide (ITO) electrode and to covalently immob

114 ration and use of a thin metal film modified Indium Tin Oxide (ITO) electrode as a highly conductive,

115 The distribution of current across an indium tin oxide (ITO) electrode can be altered by varyi

116 ization of affinity-purified antibodies onto indium tin oxide (ITO) electrode chips.

117 ing of gold nanoparticle (AuNP) arrays on an indium tin oxide (ITO) electrode using efficient and low

118 defined supported Ru(bda) catalyst on porous indium tin oxide (ITO) electrode.

119 ucture of PVDF nanowires-PDMS composite film/indium tin oxide (ITO) electrode/polarized PVDF film/ITO

120 (QD)-sensitized photocathodes on NiO-coated indium tin oxide (ITO) electrodes and their H2-generatin

121 Immobilization on indium tin oxide (ITO) electrodes of 330- and 1200-base

122 nalized bioreceptor layers were deposited on indium tin oxide (ITO) electrodes on poly(ethylene terep

123 of a microchip device that uses transparent indium tin oxide (ITO) electrodes to measure quantal exo

124 urface consists of nanostructured silver and indium tin oxide (ITO) electrodes which are separated by

125 e to reference devices using polycrystalline indium tin oxide (ITO) electrodes.

126 bon nanotube (SWCNT) forests were printed on indium tin oxide (ITO) electrodes.

127 ted polymeric films on optically transparent indium tin oxide (ITO) electrodes.

128 eam using a time-varying subwavelength-thick indium tin oxide (ITO) film in its ENZ spectral range.

129 d on Lossy Mode Resonances generated by thin indium tin oxide (ITO) films fabricated onto the planar

130 Thin indium tin oxide (ITO) films have been used as a medium

131 eposited zinc-oxide-based semiconductors and indium tin oxide (ITO) gate electrodes.

132 ists of a plano-convex PVC gel micro-lens on Indium Tin Oxide (ITO) glass, confined with an annular e

133 This control is achieved by embedding indium tin oxide (ITO) into these cavities.

134 Indium tin oxide (ITO) is a popular electrode choice, wi

135 Whereas indium tin oxide (ITO) is a well-known transparent condu

136 Indium tin oxide (ITO) is one of the most widely used tr

137 Heavily n-doped indium tin oxide (ITO) is used as the semiconductor in t

138 et price and limited resources of indium for indium tin oxide (ITO) materials currently applied in mo

139 Monodisperse 11 nm indium tin oxide (ITO) nanocrystals (NCs) were synthesiz

140 We first synthesize indium tin oxide (ITO) nanocrystals directly on function

141 enzyl alcohol (MBA) to its aldehyde (MBAld), indium tin oxide (ITO) nanoparticles as electron conduit

142 Indium tin oxide (ITO) nanoparticles were spray-coated o

143 Indium tin oxide (ITO) offers such functionalities and h

144 bsequent stripping of lead and cadmium on an indium tin oxide (ITO) optically transparent electrode (

145 a new label-free biosensing device based on indium tin oxide (ITO) overlaid section of a multimode o

146 alignment is demonstrated by various shaped indium tin oxide (ITO) patterns.

147 Indium tin oxide (ITO) reacts with tetra(tert-butoxy)tin

148 Using an indium tin oxide (ITO) sensor platform with a 50 nm Nafi

149 iron oxide (Fe3O4) nanodots fabricated on an indium tin oxide (ITO) substrate via a block copolymer t

150 veguide lightmode spectroscopy (OWLS) and an indium tin oxide (ITO) substrate, we show that asymptoti

151 )-2-propanolate) immobilized on a mesoporous indium tin oxide (ITO) substrate, with that of an hetero

152 e-deposited poly(3-hexylthiophene) (P3HT) on indium tin oxide (ITO) substrate.

153 ticulate thin films fabricated on silica and Indium Tin Oxide (ITO) substrates using femtosecond puls

154 a pi-conjugated organic semiconductor on the indium tin oxide (ITO) surface followed by doping with a

155 r cytochrome c directly immobilized onto the indium tin oxide (ITO) surface, we measured a reaction r

156 Bi NPs were fabricated on indium tin oxide (ITO) surfaces from a bismuth trichlori

157 ly due to the clustering of BCP molecules on indium tin oxide (ITO) surfaces, which is a significant

158 nic acid self-assembled monolayers (SAMs) on indium tin oxide (ITO) surfaces.

159 aveguide was over-coated with a thin film of indium tin oxide (ITO) that served as an optically trans

160 aR and controlled potential coulometry in an indium tin oxide (ITO) thin-layer electrochemical cell.

161 An optically transparent patterned indium tin oxide (ITO) three-electrode sensor integrated

162 An indium tin oxide (ITO) transparent electrical heater is

163 raphene is more electrochemically inert than indium tin oxide (ITO) where ITO undergoes reduction-oxi

164 We demonstrate Mn CSV using an indium tin oxide (ITO) working electrode both bare and c

165 d galvanostatic excitation on a prepatterned indium tin oxide (ITO) working electrode to modulate pH

166 supported by a 20-nm-thick metallic film of indium tin oxide (ITO), a plasmonic material serving as

167 ricated by electrodeposition of Co(3)O(4) on indium tin oxide (ITO), followed by electropolymerizatio

168 contrast, PC-12 cells interacted poorly with indium tin oxide (ITO), poly(L-lactic acid) (PLA), and p

169 place the most common transparent conductor, indium tin oxide (ITO), with a material that gives compa

170 Nanoporous films of indium tin oxide (ITO), with thicknesses ranging from 25

171 Amorphous indium tin oxide (ITO)-based thin-film transistors (TFTs

172 arge-neutral morpholino capture probes on an indium tin oxide (ITO)-coated glass slide.

173 four model cell lines, cultured directly on indium tin oxide (ITO)-coated glass slides.

174 so protects the conductive layer on gold and indium tin oxide (ITO)-coated slides.

175 Deposition of the Co-Pi catalyst on the Indium Tin Oxide (ITO)-passivated p-side of a np-Si junc

176 nic acid self-assembled monolayers (SAMs) on indium tin oxide (ITO).

177 ngs are being considered as replacements for indium tin oxide (ITO).

178 o become a prominent low-cost alternative to indium tin oxide (ITO).

179 chnique coupled with a nanoscale transducer, indium tin oxide (ITO).

180 sonance in the ENZ region in a thin layer of indium tin oxide (ITO).

181 The working electrode was composed of indium tin oxide (ITO); the quasi-reference and auxiliar

182 n additional conducting-polymer layer at the indium-tin oxide (ITO) anode.

183 ed by an electropolymerisation process on an indium-tin oxide (ITO) coated glass substrate.

184 d cadmium selenide quantum dots (QCdSe) onto indium-tin oxide (ITO) coated glass substrate.

185 t have an optically transparent thin film of indium-tin oxide (ITO) covering the exterior is describe

186 al hydrogen nanobubbles on the surface of an indium-tin oxide (ITO) electrode.

187 nalysis of single redox events on a modified indium-tin oxide (ITO) electrode.

188 In this paper we describe fabrication of indium-tin oxide (ITO) electrodes and the design of a li

189 utions was studied at glassy carbon (GC) and indium-tin oxide (ITO) electrodes modified by gold nanop

190 ly size-selected Pt(n) clusters deposited on indium-tin oxide (ITO) electrodes was used to examine th

191 nm) poly(aniline) (PANI) films deposited on indium-tin oxide (ITO) have been investigated using elec

192 ted polymer (MIP-FU) films were deposited on indium-tin oxide (ITO) or Au film-coated glass slides, P

193 simple, and disposable immunosensor based on indium-tin oxide (ITO) sheets modified with gold nanopar

194 biotin was covalently bound to a transparent indium-tin oxide (ITO) working electrode, which also ser

195 For this purpose, we integrate indium-tin-oxide (ITO) as a tunable electro-optical mate

196 insensitivity in an epsilon-near-zero (ENZ) indium-tin-oxide (ITO) cladded, hollow-core micro-ring r

197 old nanoparticles (Au NPs) attached to glass/indium-tin-oxide (ITO) electrodes as a function of parti

198 Polycaprolactone (PCL) electrospun fibers on indium-tin-oxide (ITO) glass provide a sufficient surfac

199 A transparent indium-tin-oxide (ITO) nanolens was designed to focus th

200 oantennas coupled to an optically absorptive indium-tin-oxide (ITO) substrate can generate >micrometr

201 as been electrophoretically deposited on the indium-tin-oxide (ITO) substrate.

202 Conductive indium-tin-oxide (ITO, In(2)O(3):Sn) mesoporous films we

203 al bonding of TPDSi(2) to PLED anodes (e.g., indium tin oxide, ITO) and its self-cross-linking enable

204 ally sputtered both intrinsic zinc oxide and indium tin oxide layers.

205 ch is covalently immobilized on a mesoporous indium tin oxide (mesoITO) scaffold for efficient alcoho

206 hermosynechococcus elongatus on a mesoporous indium-tin oxide (mesoITO) electrode.

207 ed by second harmonic generation from wedged indium tin oxide multilayers.

208 n the optoelectronic properties of colloidal indium tin oxide nanocrystals is reported.

209 Because of coupling between linked indium tin oxide nanocrystals, their infrared absorption

210 rfaces of mesoporous, transparent conducting indium tin oxide nanoparticle (nanoITO) electrodes to pr

211 A silver nanowire-indium tin oxide nanoparticle composite and its successf

212 generation from an individual semiconductor indium tin oxide nanoparticle is significantly enhanced

213 into a near field localized at its gap; the indium tin oxide nanoparticle located at the plasmonic d

214 Chemically modified indium tin oxide nanoparticle modified electrodes were u

215 f up to 10(6)-fold compared with an isolated indium tin oxide nanoparticle, with an effective third-o

216 n the sub-picosecond optical nonlinearity of indium tin oxide nanorod arrays (ITO-NRAs) following int

217 Our cells have a p-i-n structure (glass/indium tin oxide/NiO(x)/perovskite/ZnO/Al), in which the

218 The sensor consisted of an indium tin oxide optically transparent electrode (ITO OT

219 s in attenuation of light passing through an indium tin oxide optically transparent electrode (ITO-OT

220 gh surface area conductive metal oxide film--indium tin oxide or antimony tin oxide--coated with a th

221 mory using SiO(x) as the active material and indium tin oxide or graphene as the electrodes.

222 ed metal oxides, the most common of which is indium tin oxide, or ITO.

223 rticles (NPs)/nanoclusters (NCs) attached to indium-tin-oxide- or fluorine-doped-tin-oxide-coated gla

224 prototype sensing platform consisting of an indium tin oxide OTE coated with a cation-selective, sol

225 ensor-channel integration is the use of gold/indium-tin oxide patterned electrode directly on a porou

226 ble perovskite solar-cell devices made on an indium tin oxide/poly(ethylene terephthalate) substrate

227 stors, conductive transparent electrodes for indium tin oxide replacement, e.g. in light-emitting dio

228 Electropolymerizing polyaniline (PANI) on an indium tin oxide screen-printed electrode (ITO SPE), we

229 We also find that the indium tin oxide/self-assembled monolayer-based hole tra

230 Indium tin oxide, semiconductor nanomaterial ZnO, and Cu

231 ere successfully mounted onto gelatin-coated indium tin oxide slides with minimal tearing.

232 In arrays of gold nanoparticles on an indium tin oxide substrate and arrays of 100-nanometer-d

233 mprises a polytetrafluoroethylene film on an indium tin oxide substrate plus an aluminium electrode.

234 to pearl shaped of Mn3O4-Cn nanocomposite on indium tin oxide substrate.

235 oated Au nanoparticles (Au NPs) deposited on indium tin oxide substrates was investigated.

236 to that of their counterparts on rigid glass/indium tin oxide substrates, reaching a power conversion

237 n nanotubes that have been immobilised on an indium tin oxide surface functionalised with osmium-base

238 to achieve this first requires showing that indium tin oxide surfaces can be used for SMLM, then tha

239 ting onto glassy carbon, gold, platinum, and indium tin oxide surfaces.

240 hioesters to enolate acceptors on conductive indium tin oxide surfaces.

241 When anchored to nanoITO (indium tin oxide), the ruthenium chromophore-catalyst as

242 Thin films of indium tin oxide-the prototypical transparent electrode

243 Here, a sub-10 nm indium-tin-oxide transistor with an ultrashort vertical

244 findings indicate that electrolyte gating in indium tin oxide triggers a pure electronic process (ele

245 , in-situ-grown over a conductive substrate (indium tin oxide) using a low-temperature template-based

246 Electrode based on transparent layer of indium tin oxide was electrochemically modified with a l

247 To inject a cell, voltage was applied to the indium-tin oxide while simultaneously applying vacuum at

248 ce-limiting components, such as substituting indium-tin-oxide with fluorinated-tin-oxide analogs.