ライフサイエンスコーパス: light-emitting diode

1 ity under near-infrared illumination (730 nm light-emitting diode).

2 rate a skinlike finger-wearable driver for a light-emitting diode.

3 diation (lambda approximately 300 nm) from a light-emitting diode.

4 is operated as a solar cell rather than as a light-emitting diode.

5 hotovoltaics, photoelectrochemical cells and light emitting diodes.

6 infrared (1.8-2.0 mum) lasers pumped by GaN light emitting diodes.

7 erformance for photovoltaics, detectors, and light emitting diodes.

8 rough optoelectronic detector made of paired light emitting diodes.

9 gh-performance materials for solar cells and light emitting diodes.

10 wards lasing actions in cavity-based organic light-emitting diodes.

11 increase the optical outcoupling in organic light-emitting diodes.

12 ity samples most relevant to solar cells and light-emitting diodes.

13 owing phenomenon in the cavity-based organic light-emitting diodes.

14 devices such as photovoltaic solar cells and light-emitting diodes.

15 ieve stable and high efficiency blue organic light-emitting diodes.

16 optoelectronics, including photovoltaics and light-emitting diodes.

17 oe with disruptive technologies like organic light-emitting diodes.

18 cessful growth of p-type GaN by VPE for blue light-emitting diodes.

19 proved performance in solar photovoltaics or light-emitting diodes.

20 e negative repercussions for TADF in organic light-emitting diodes.

21 rged as emitters in high-performance organic light-emitting diodes.

22 he research communities of photovoltaics and light-emitting diodes.

23 electronic devices, such as transistors and light-emitting diodes.

24 re used to fabricate high-efficiency organic light-emitting diodes.

25 emiconductor devices such as solar cells and light-emitting diodes.

26 eservoir is illuminated from the bottom with light-emitting diodes.

27 ows proper design of high efficiency organic light-emitting diodes.

28 mit their applications in many areas such as light-emitting diodes.

29 m transistors are also used to drive organic light-emitting diodes.

30 s including solar cells, photodetectors, and light-emitting diodes.

31 efficiency and stability in sky-blue organic light-emitting diodes.

32 n assisting light extraction from perovskite light-emitting diodes.

33 of irradiation using green, red, and far-red light-emitting diodes.

34 of high-performance and solution-processable light-emitting diodes.

35 io-imaging, photodynamic therapy and organic light-emitting diodes.

36 s of phosphorescent state-of-the-art organic light-emitting diodes.

37 fficient electroluminescence (EL) in organic light-emitting diodes.

38 A white light-emitting diode (0.33, 0.33) is fabricated using pe

39 85 and 625 nm, respectively) presented by 76 light-emitting diodes, 1.8-mm spot size at different loc

40 Efficient quasi-2D-structure perovskite light-emitting diodes (4.90 cd A(-1) ) are demonstrated

41 The high-speed property gives the light-emitting diodes a high response speed and low dark

42 ed electron transfer, initiated using 365 nm light-emitting diodes, affords radicals at room temperat

43 In organic light-emitting diodes, an order of magnitude enhancement

44 ices with donor/acceptor interfaces, such as light emitting diodes and photodetectors.

45 at -40 degrees C under excitation by a blue light-emitting diode and benefits from the use of a sing

46 ignal of the sample is excited by a laser or light-emitting diode and separated by a polarization bea

47 red respiration sensors, and used to power a light-emitting diode and to charge a storage capacitor.

48 under irradiation with 365 nm light using a light-emitting diode and was performed in regular glassw

49 highlight the properties that have delivered light-emitting diodes and lasers.

50 ar cells as well as fluorescent materials in light-emitting diodes and nanoscale lasers.

51 vances in light generation/manipulation with light-emitting diodes and optical fiber technologies whi

52 amine the use of PA-modified TCOs in organic light-emitting diodes and organic photovoltaics are comp

53 high-performance, solution-processed, white-light-emitting diodes and organic solar cells using poly

54 azol-2-yl)phenol that can be used in organic light-emitting diodes and pharmaceuticals.

55 importance in solar cells and infrared (IR) light-emitting diodes and photodetectors, advances in th

56 new applications in two-dimensional lasers, light-emitting diodes and photovoltaic devices.

57 GaN-based light-emitting diodes and photovoltaics are less importa

58 for advanced optoelectronics and are used in light-emitting diodes and photovoltaics.

59 or the function of organic semiconductors in light-emitting diodes and solar cells, as well as spintr

60 (e.g., in photovoltaics, photodetectors, and light-emitting diodes) and colloidal nanocrystals (e.g.,

61 plications in molecular electronics, organic light emitting diodes, and photovoltaic devices.

62 lymers, carbon nanotubes, graphenes, organic light-emitting diodes, and diamond films fabricated via

63 electronic applications such as solar cells, light-emitting diodes, and displays.

64 lications such as solar cells, photodectors, light-emitting diodes, and lasers.

65 ronic devices like field-effect transistors, light-emitting diodes, and solar cells.

66 emand in applications including solar cells, light-emitting diodes, and touch panels.

67 Nitride phosphors are suitable for white light-emitting diode applications.

68 lty by introducing a configuration where the light-emitting diodes are connected in series, and thus

69 Electroluminescent quantum dot light-emitting diodes are promising candidates for such

70 triplets into radiative singlets in exciplex light-emitting diodes are reported.

71 transistors, resonant tunneling diodes, and light-emitting diodes--are also starting to emerge.

72 ht (180 s; 25 mW/cm(2); 4.5 J/cm(2)) using a light-emitting diode array (Quantum Devices, Barneveld,

73 t that holds and illuminates the MTP using a light-emitting-diode array.

74 her directly drive the sensor and power up a light-emitting diode as a warning signal, or can be stor

75 A flexible organic light-emitting diode based on tris(bipyridyl)ruthenium(I

76 Bright light-emitting diodes based on solution-processable orga

77 Highly bright light-emitting diodes based on solution-processed all-in

78 cally detected magnetic resonance of organic light-emitting diodes based on thermally activated delay

79 a proof-of-concept low-cost, amplifier-free, light-emitting-diode-based low-power ion-indicator.

80 pproaching that of commercial fluorescent or light-emitting diode bulbs, but with exceptional reprodu

81 echnologies, particularly photocatalysis and light-emitting diodes, but they rely heavily on molecule

82 High-performance light-emitting diodes can be realized with these highly

83 vel chip scale packages, chip resistors, and light-emitting diodes, can be reflow-soldered onto S4s w

84 ntacts on the top surface of solar cells and light emitting diodes cause shadow losses.

85 sues in a (11-22) semi-polar GaN based white light emitting diode (consisting of yellow and blue emis

86 ations that range from biosensors to organic light-emitting diodes, current understanding of the quan

87 spectroscopy on state-of-the-art quantum-dot light-emitting diodes demonstrates that exciton generati

88 ions such as solution-processed solar cells, light-emitting diodes, detectors and lasers(8-15).

89 The proof-of-concept solar cell and light-emitting diode devices based on the NHE-FAPbI(3) s

90 ent of new types of displays such as organic light-emitting diode displays, and also to overcome the

91 such as active-matrix addressing of organic light-emitting diode displays.

92 Irradiation with deep-ultraviolet light-emitting diodes (DUV LEDs) is emerging as a low en

93 onic system consists of sub-millimeter-scale light-emitting diodes embedded in a soft, circumneural s

94 A three-color warm-white organic light-emitting diode employing an efficient phosphor-pho

95 devices, including photodetectors, sensors, light-emitting diodes, etc.

96 Rubrene/C(60) light emitting diodes exhibit a distinct low voltage (ha

97 lid state thin films, and the fabricated red light emitting diodes exhibited high brightness (1250 cd

98 een used as an emissive dopant in an organic light emitting diode exhibiting external quantum efficie

99 chnologies ranging from organic transistors, light-emitting diodes, flexible displays and photovoltai

100 Xpert MTB/RIF assay (Xpert) or point-of-care light-emitting diode fluorescence microscopy (LED-FM) fo

101 electronic devices including solar cells and light-emitting diodes for improved stability, which need

102 using interface QW concept in nitride-based light-emitting diodes for long wavelength emission.

103 l complexes are used as photosensitizers, in light-emitting diodes, for biosensing and in photocataly

104 A deep-blue organic light-emitting diode from one phosphor exhibits Commissi

105 nts including bleomycin, salicylic acid, and light-emitting diode have shown some success.

106 Gallium-nitride-based light-emitting diodes have enabled the commercialization

107 Perovskite light-emitting diodes have recently broken the 20% barri

108 alide perovskites, including solar cells and light-emitting diodes, have attracted tremendous researc

109 which utilize active photon emitters such as light-emitting diodes, have the potential to significant

110 antum efficiency, a blue fluorescent organic light-emitting diode having a power efficiency higher th

111 ly, the paper-surface was illuminated with a light emitting diode, (ii) then, the transmitted (reflec

112 A color tunable organic light emitting diode in red spectrum was attached on a t

113 ence quenching allow us to fabricate organic light-emitting diodes in both host-free and host-guest a

114 panels, liquid crystal displays, and organic light-emitting diodes in conjunction with a critical ana

115 dly applications in (phosphorescent) organic light emitting diodes, in imaging and sensing systems, i

116 light emission, e.g., for polarized organic light emitting diodes is demonstrated.

117 mitting molecules used as dopants in organic light-emitting diodes is an effective strategy to improv

118 fluorescent and phosphorescent blue organic light-emitting diodes is demonstrated.

119 lization as a substrate for flexible organic light-emitting diodes is demonstrated.

120 ure and high-input-power durable solid-state light-emitting diodes is illustrated.

121 n of highly efficient perovskite nanocrystal light-emitting diodes is shown.

122 A major limitation in perovskite light-emitting diodes is their limited operational stabi

123 e nanocrystals (NCs) for use in solar cells, light emitting diodes, lasers, and photodetectors.

124 recombination characteristics for high-power light-emitting-diodes, lasers, single-molecular tracking

125 The light emitting diode leads to a 72.5% external quantum e

126 Use of the MXene electrode in an organic light-emitting diode leads to a current efficiency of ~1

127 gaseous hydrogen sulfide, employing a 470 nm light emitting diode (LED) and a microfiber optic USB sp

128 tection system comprising an interchangeable light emitting diode (LED) and a photodiode.

129 o demonstrate devices that operate as both a light emitting diode (LED) and an optically pumped laser

130 The effect of the light emitting diode (LED) as an innovative light source

131 Kapton tape is demonstrated to power a 2.2 V light emitting diode (LED) for 1 min.

132 Commercial light emitting diode (LED) materials - blue (i.e., InGaN

133 Light from a white light emitting diode (LED) source is dispersed onto a di

134 ose indicator system continuously operates a light emitting diode (LED) through a capacitive charge/d

135 self unless irradiated with a low-power blue light emitting diode (LED), resulting in local anesthesi

136 solid-state (DPSS) laser, laser diode (LD), light emitting diode (LED), super luminescent light emit

137 t developing a highly sensitive and low-cost light emitting diode (LED)-based epifluorescence sensor

138 subthreshold optical signals from a distant light emitting diode (LED).

139 escence (MEL) measurement in fullerene-based light emitting diodes (LED).

140 the present study, we used a tethered-flight light-emitting diode (LED) arena, which allowed for quan

141 The influence of different wavelength of light-emitting diode (LED) at 250mumol.m(-2).s(-1) of ph

142 an interchangeable narrow-spectral bandwidth light-emitting diode (LED) block that can be used in con

143 presence of a photoredox catalyst under blue light-emitting diode (LED) irradiation.

144 this work, for the first time, a sub-250 nm light-emitting diode (LED) is investigated as a light so

145 that can be excited by near-infrared 740 nm light-emitting diode (LED) lamps with bright upconversio

146 0 minutes, and 5.4 J/cm(2) with either green light-emitting diode (LED) or ultraviolet-A (UV-A) irrad

147 into a signal amplifier circuit connected to light-emitting diode (LED) reporting units.

148 e incorporated as the recombination layer in light-emitting diode (LED) structures.

149 otential to develop into a new generation of light-emitting diode (LED) technology.

150 er euro100 and features optional modules for light-emitting diode (LED)-based fluorescence microscopy

151 mic administration in mice followed by local light-emitting diode (LED)-based illumination, either of

152 Here, we describe a compact light-emitting diode (LED)-induced fluorescence detector

153 ed to quantify the amount of bacteria with a light-emitting diode (LED)-induced fluorescence module i

154 ells (MQWs) served as an active region for a light-emitting diode (LED).

155 cient electrical energy to light an external light-emitting diode (LED).

156 ution and solid films) or electrically [in a light-emitting diode (LED)].

157 ed light (830 nm) transmitted by an array of light-emitting diodes (LED) prior to infusion of NOD/SCI

158 when anilines reacted with thiols under blue light-emitting-diode (LED) irradiation at room temperatu

159 (QWs) are analyzed for deep ultraviolet (UV) light emitting diodes (LEDs) and lasers.

160 its were integrated into the device based on light emitting diodes (LEDs) and smart phones.

161 onductivity and electroluminescence in their light emitting diodes (LEDs) at cryogenic temperatures.

162 en performed on a series of semi-polar InGaN light emitting diodes (LEDs) grown on semi-polar (11-22)

163 Light emitting diodes (LEDs) have been developed to emit

164 ow irradiation (1.4 mW/cm(2) at 632 nm) from light emitting diodes (LEDs) in the device.

165 rmed on a series of semi-polar (11-22) InGaN light emitting diodes (LEDs) with emission wavelengths u

166 that when excited by appropriately selected light emitting diodes (LEDs), are visualized and automat

167 andheld ophthalmic readout device comprising light-emitting diodes (LEDs) and bandpass filters is fab

168 2D) and three-dimensional (3D) circuits with light-emitting diodes (LEDs) and batteries, reconfigurab

169 Stretchable light-emitting diodes (LEDs) and electroluminescent capa

170 ontrasting behavior of quasi-2D materials in light-emitting diodes (LEDs) and photovoltaics (PV) in t

171 Light-emitting diodes (LEDs) are a potential new resourc

172 Intrinsically stretchable light-emitting diodes (LEDs) are demonstrated using orga

173 Ultraviolet (UV)-light-emitting diodes (LEDs) are now widely used in anal

174 White light-emitting diodes (LEDs) are rapidly replacing conve

175 ciently manipulate the emission intensity of light-emitting diodes (LEDs) by utilizing the piezo-pola

176 n polariton lasers as well as for high speed light-emitting diodes (LEDs) for communication systems.

177 The first application of light-emitting diodes (LEDs) for ultraviolet photodissoc

178 The performance of lead-halide perovskite light-emitting diodes (LEDs) has increased rapidly in re

179 Perovskite-based solar cells and light-emitting diodes (LEDs) have achieved remarkable br

180 Although metal halide perovskite (MHP) light-emitting diodes (LEDs) have demonstrated great pot

181 We describe light-emitting diodes (LEDs) made by stacking metallic g

182 ar a-plane InGaN multiple-quantum-well (MQW) light-emitting diodes (LEDs) on sapphire, achieved by ov

183 erall effect of five different low-intensity light-emitting diodes (LEDs) on the quality parameters o

184 Metal halide perovskites show promise for light-emitting diodes (LEDs) owing to their facile manuf

185 t (DUV) sources, the efficiency of AlGaN DUV light-emitting diodes (LEDs) remains very low because th

186 work reports the first examples of transient light-emitting diodes (LEDs) that can completely dissolv

187 mi-polar (20[Formula: see text]1) InGaN blue light-emitting diodes (LEDs) were fabricated and compare

188 Pure FA-perovskite-based light-emitting diodes (LEDs) with high efficiency are re

189 Fluorene-free perovskite light-emitting diodes (LEDs) with low turn-on voltages,

190 Near-infrared (NIR) light-emitting diodes (LEDs), with emission wavelengths

191 antennas connected to microscale, injectable light-emitting diodes (LEDs), with the ability to operat

192 amps, fluorescent light or increasingly, the light-emitting diodes (LEDs).

193 ed light (830 nm) transmitted by an array of light-emitting diodes (LEDs).

194 to thermal and efficiency droop in InGaN/GaN light-emitting diodes (LEDs).

195 importance because the demand for high-power lighting-emitting diodes (LEDs) is currently increasing.

196 y can operate with low-power density far-red light-emitting diode light.

197 be utilized for high-temperature probing and light-emitting-diode lighting.

198 valuate the impact of selected types of LED (light emitting diodes) lighting on the quality of alfalf

199 ion from purely organic molecules in organic light-emitting diode materials offers an alternative rou

200 escent light emitting diode (sLED) and micro light emitting diode (mLED) in different settings, toget

201 ntified thousands of promising novel organic light-emitting diode molecules across the visible spectr

202 es based on injectable, microscale inorganic light-emitting diodes (mu-ILEDs) with wireless control a

203 novel high-density silicon-based microscale light-emitting diode (muLED) array, consisting of up to

204 thod to monolithically integrate microscopic light emitting diodes (muLEDs) and recording sites onto

205 t cause of two exigent challenges in organic light-emitting diodes; namely, efficiency roll-off and d

206 In this research, nano-ring light-emitting diodes (NRLEDs) with different wall width

207 bles as flexible, high pixel density organic light emitting diode (OLED) displays, and may be scaled

208 to obtain efficient multifunctional organic light emitting diode (OLED) materials.

209 nd 0.1 microM) were obtained with an organic light emitting diode (OLED), having an emission spectrum

210 behavior with the performance of the organic light-emitting diode (OLED) and related EL devices.

211 Furthermore, an organic light-emitting diode (OLED) device fabricated with the m

212 Organic light-emitting diode (OLED) displays a sign reversal mag

213 dy, we show that the architecture of organic light-emitting diode (OLED) displays can be completely r

214 By further coupling with an organic light-emitting diode (OLED), a visible and wearable touc

215 Organic light emitting diodes (OLEDs) are in widespread use in t

216 ns worldwide, affording new improved organic-light emitting diodes (OLEDs) ripe for commercial applic

217 s devices, which incorporated DNA in organic light emitting diodes (OLEDs), resulted in significant i

218 intronics, photoredox catalysis, and organic light emitting diodes (OLEDs).

219 e of such metal halide growth, green organic light-emitting diodes (OLEDs) are demonstrated using a d

220 Here, narrowband organic light-emitting diodes (OLEDs) are developed and used for

221 Phosphorescent organic light-emitting diodes (OLEDs) are leading candidates for

222 Organic light-emitting diodes (OLEDs) are revolutionizing displa

223 Solution-processed polymer organic light-emitting diodes (OLEDs) doped with triplet-triplet

224 polyfluorene matrix and demonstrate organic light-emitting diodes (OLEDs) emitting at 720 nm.

225 Organic light-emitting diodes (OLEDs) fabricated with (MAC*)Cu(C

226 Direct emission of CP light from organic light-emitting diodes (OLEDs) has been a focus of resear

227 Organic light-emitting diodes (OLEDs) promise highly efficient l

228 Here, we employ organic light-emitting diodes (OLEDs) that are micropatterned in

229 Organic light-emitting diodes (OLEDs) with um-scale thickness an

230 injection is an essential process in organic light-emitting diodes (OLEDs)(1-7).

231 (opto)electronic applications, e.g. organic light-emitting diodes (OLEDs), organic field-effect tran

232 novel photofunctional materials for organic light-emitting diodes (OLEDs), photovoltaic cells, chemi

233 With the example of organic light-emitting diodes (OLEDs), spectral imaging with pix

234 are synthesized for high-efficiency organic light-emitting diodes (OLEDs), The two emitters have a t

235 yer (HIL/HTL) for solution-processed organic light-emitting diodes (OLEDs).

236 y conversion applications as well as organic light-emitting diodes (OLEDs).

237 t ideal for electrical excitation in organic light-emitting diodes (OLEDs).

238 yed fluorescence (TADF) emitters for organic light-emitting diodes (OLEDs).

239 uble-heterojunction nanorod light-responsive light-emitting diodes open feasible routes to a variety

240 g four major topics: electro-optics, organic light emitting diodes, organic field-effect transistors,

241 dye-sensitized solar cells, DTT polymers in light-emitting diodes, organic field-effect transistors

242 High-brightness blue perovskite light-emitting diodes (PeLEDs) are obtained by controlli

243 Perovskite light-emitting diodes (PeLEDs) based on three-dimensiona

244 s as emitting layers, green perovskite-based light-emitting diodes (PeLEDs) exhibit electroluminescen

245 The efficiencies of green and red perovskite light-emitting diodes (PeLEDs) have been increased close

246 Although perovskite light-emitting diodes (PeLEDs) have recently experienced

247 ep blue emission from phosphorescent organic light-emitting diodes (PHOLED) is required for both disp

248 onal lifetime of blue phosphorescent organic light-emitting diodes (PHOLEDs) has remained insufficien

249 ole as liquid crystalline materials, organic light-emitting diodes, photochemical switches, redox mat

250 sistors, amplifiers, bio-sensors, actuators, light emitting diodes, photodetector arrays, photovoltai

251 ic transistors and circuitry, optoelectronic light-emitting diodes, photovoltaic devices and photodet

252 c glasses that serve as the active layers in light-emitting diodes, photovoltaics, and other devices.

253 ng of two emissive materials to form polymer light-emitting diodes (PLEDs) that emit light of differe

254 yield, are employed in red and near-infrared light-emitting diodes, providing a new platform of phosp

255 Here, we present quantum dot light emitting diodes (QDLEDs) with a metasurface-integr

256 an important prerequisite for fabricating QD light-emitting diode (QLED) displays and other optoelect

257 The operation of nanocrystal-based light-emitting diodes relies on the radiative recombinat

258 nities in battery, biology, deep ultraviolet light emitting diodes, sensors, filters, and other optoe

259 ight emitting diode (LED), super luminescent light emitting diode (sLED) and micro light emitting dio

260 died for the potential applications in white light emitting diodes, solar cells, optical codes, biome

261 class of building blocks for use in lasers, light emitting diodes, solar concentrators, and parity-t

262 various opto/electronic devices, including, light-emitting diodes, solar cells, and organic thin-fil

263 ohmic contacts for high-performance organic light-emitting diodes, solar cells, photodiodes and tran

264 their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefrac

265 To achieve this, we fabricate a light-emitting diode structure comprising single-layer g

266 The efficacy of a UV-A light emitting diode system (LED) to reduce the concentr

267 igh quantum yield emitters in modern organic light-emitting diode technology and for deterministic ex

268 des in two spintronic-based devices: a 'spin light emitting diode' that results in circularly polariz

269 cal fibers, one connecting with a commercial light-emitting diode to deliver the input light signal,

270 The sensing platform includes an ultraviolet-light-emitting diode to provide the proper excitation an

271 interface that exploits microscale inorganic light-emitting diodes to activate opsins; (2) a soft, hi

272 nal, accurate, and noninvasive technique for light-emitting diodes to measure Tj in the absence of PI

273 ns ranging from field-effect transistors and light-emitting diodes to medical X-ray detectors.

274 of the smartphone, which contains two white light-emitting-diodes to illuminate the water sample, op

275 Here transparent quantum dot light-emitting diodes (Tr-QLEDs) are reported with high

276 scence solely observed from the cavity-based light-emitting diodes under electrical injection.

277 Single-layer light-emitting diodes using the composite thin film sand

278 a Pi camera, coupled with three ultraviolet light emitting diodes (UV-LEDs), a diffraction grating,

279 ricated and characterized a deep-ultraviolet light-emitting diode (UV-LED) device using this AlN/patt

280 A 235 nm deep ultraviolet-light-emitting diode (UV-LED) is employed within an on-c

281 deuterium lamp with bandpass filters and UV light-emitting diodes (UV LEDs) isolated wavelengths in

282 UV-C light-emitting diodes (UV-C LEDs) are becoming a competi

283 onvertible phosphor for application in white light emitting diodes (w-LEDs).

284 d delayed fluorescence - based white organic light emitting diodes (W-OLEDs) composed of three emitte

285 A white light-emitting diode (w-LED) constructed from the metal

286 port a high-performance phosphors-free white light-emitting-diodes (w-LEDs) using Ba2V2O7 or Sr2V2O7

287 rm for the ITO/Au transparent electrode with light-emitting diodes was fabricated and its feasibility

288 antioxidants showed significant responses to light emitting diodes wavelengths.

289 not only be delivered by lasers, but also by light-emitting diodes, which are less expensive, safer,

290 nd device applications, such as solar cells, light-emitting diodes, white-light emitters, lasers, and

291 photo-irradiated for 15 min with visible red light-emitting diodes with a light-fluence of 0.54 J/cm(

292 Efficient organic light-emitting diodes with better roll-off behavior base

293 bene to cis-stilbene in the presence of blue light-emitting diodes with broad substrate scope via an

294 triplets is important for preparing organic light-emitting diodes with high efficiency.

295 axial AlInN ultraviolet core-shell nanowire light-emitting diodes with highly stable emission in the

296 These devices also function as light-emitting diodes with low turn-on voltage and tunab

297 Light-emitting diodes with tunable performance are demon

298 paced electrically or optically with a blue light-emitting diode, with activation spread recorded si

299 one of the significant challenges for white light-emitting diodes (WLEDs).

300 Cs is reported to achieve lead-reduced white light-emitting diodes (WLEDs).