ライフサイエンスコーパス: poly(dimethylsiloxane)

1 trodes and of gold electrodes patterned onto polydimethylsiloxane.

2 lease surfaces based on silicone oil-infused polydimethylsiloxane.

3 itional microfluidic devices fabricated with polydimethylsiloxane.

4 The technique was verified using bilayered polydimethylsiloxane.

5 lending (C(38)H(34)P(2))MnBr(4) powders with polydimethylsiloxane.

6 of thin films of the biocompatible elastomer polydimethylsiloxane.

7 cated using conventional soft lithography of polydimethylsiloxane.

8 technique for fabricating micropillars with poly(dimethylsiloxane).

9 dic system was obtained by double casting of poly(dimethylsiloxane).

10 simple microfluidic devices fabricated from poly(dimethylsiloxane).

11 n rules, then 3D-printed and replicated into poly(dimethylsiloxane).

12 tes with variable rigidity manufactured from poly(dimethylsiloxane), a biocompatible silicone elastom

13 viscosity, we probe this relationship using polydimethylsiloxane, a substrate whose mechanical prope

14 ic device is fabricated from three layers of poly(dimethylsiloxane) and has integrated pumps and valv

15 ed into the chamber dome of the microfluidic polydimethylsiloxane and glass platform in order to prov

16 using a microfluidic device, generated from polydimethylsiloxane and glass slide, placed on a motori

17 is inserted between a top layer, made of Al/polydimethylsiloxane, and a bottom layer, made of Al.

18 bstrate to a variety of hosts, including Si, polydimethylsiloxane, and metal-coated substrates.

19 ells (NALM6, K562, EL4) were co-incubated on polydimethylsiloxane arrays of sub-nanoliter wells (nano

20 d micropillar arrays on wrinkled elastomeric poly(dimethylsiloxane) as a reversibly switchable optica

21 e have used several liquids and cross-linked poly(dimethylsiloxane) as the solid to show that the est

22 ed with T3/PC71 BM blend based devices using polydimethylsiloxane as additive.

23 pentasiloxane as the responsive material and polydimethylsiloxane as the matrix material.

24 based on the self-assembly of polyethylene-b-polydimethylsiloxane-b-polyethylene triblock copolymers.

25 ce, and auxiliary electrodes fabricated in a poly(dimethylsiloxane)-based microfluidic device.

26 ano-adhesive bonding technique to create non-polydimethylsiloxane-based devices.

27 -end-capped poly(2-methyl-2-oxazoline)-block-poly(dimethylsiloxane)-block-poly(2-methyl-2-oxa zoline)

28 are prepared via the cooperative assembly of polydimethylsiloxane-block-poly(ethylene oxide) (PDMS-b-

29 ble-width capillary channels fabricated from polydimethylsiloxane by conventional soft lithography, a

30 Carboxen/polydimethylsiloxane (CAR/PDMS) and polydimethylsiloxane

31 The photoactuation of pen arrays made of polydimethylsiloxane carbon nanotube composites is explo

32 consists of a thin wire coated with carboxen/polydimethylsiloxane (carboxen/PDMS) material, wound in

33 sing a variety of chlorinated solvents and a polydimethylsiloxane/carboxen (PDMS/CAR) SPME fiber, mos

34 ned using a reversibly sealable, elastomeric polydimethylsiloxane cassette, fabricated with preformed

35 been achieved by modifying the array with a poly(dimethylsiloxane) chamber and coating a thin layer

36 PAHs) over a 2.2 s separation window using a poly(dimethylsiloxane-co-methylphenylsiloxane) coated OT

37 Poly(dimethylsiloxane)-coated solid-phase microextration

38 less steel/polyester fiber blended yarn, the polydimethylsiloxane-coated energy-harvesting yarn, and

39 cies were sampled in the HS using a Carboxen/polydimethylsiloxane-coated SPME fiber.

40 We prepared polydimethylsiloxane-coated stainless steel meshes for e

41 r Bar Sorptive Extraction (SBSE) involving a polydimethylsiloxane-coated stir bar with thermal desorp

42 nm) inclined guiding track ablated into the polydimethylsiloxane-coated surface of the channel with

43 stainless steel screens coated with a sticky polydimethylsiloxane coating for collecting LVPCs aeroso

44 end with a multi-walled carbon nanotube and polydimethylsiloxane composite coating.

45 The new materials consist of poly(dimethylsiloxane) composites with near-infrared-to-

46 Our poly(dimethylsiloxane) device comprises a pneumatically

47 The dependence on polydimethylsiloxane devices greatly limits the range of

48 Hybrid glass-polydimethylsiloxane diaphragm micropumps integrated int

49 The combination of a microstructured polydimethylsiloxane dielectric and the high-mobility se

50 ation of this technique is demonstrated with polydimethylsiloxane-divinylbenzene (PDMS-DVB) and polya

51 Carboxen/polydimethylsiloxane (CAR/PDMS) and polydimethylsiloxane/divinylbenzene (PDMS/DVB) TFME samp

52 d to commercial polydimethylsiloxane (PDMS), polydimethylsiloxane/divinylbenzene (PDMS/DVB), and poly

53 ent polymers such as divinylbenzene/carboxen/polydimethylsiloxane (DVB/Car/PDMS) and octadecyl/benzen

54 action (HS-SPME) with a 65 um divinylbenzene/polydimethylsiloxane (DVB/PDMS) fiber and gas chromatogr

55 Soft, solvent-free poly(dimethylsiloxane) elastomers are fabricated by a on

56 Using prototypical poly(dimethylsiloxane) elastomers, we illustrate how thi

57 d from a composite consisting of elastomeric poly(dimethylsiloxane) embedded with a thin layer of qua

58 dy, we introduce the use of a micropatterned polydimethylsiloxane encapsulation layer to form narrow

59 aqueous samples with divinylbenzene/Carboxen/poly(dimethylsiloxane) fiber.

60 The optimized operating conditions (Carboxen/Polydimethylsiloxane fiber coating, 66 degrees C, 20 min

61 ion conditions using divinylbenzene-carboxen-polydimethylsiloxane fiber were: temperature of 50 degre

62 In this study, we explored the preloading of polydimethylsiloxane fiber with stable isotope labeled a

63 The swimmer consists of a polydimethylsiloxane filament with a short, rigid head a

64 m high volume of solution was contained by a poly(dimethylsiloxane) gasket and capped with a glass sl

65 flow sample streams are coupled to a hybrid polydimethylsiloxane-glass microfluidic device capable o

66 A microreactor fabricated from polydimethylsiloxane/glass was silanated with trimethoxy

67 tigate the adhesion behavior of soft elastic polydimethylsiloxane hemispheres (modulus ranging from 0

68 ptor phase is flowed through a probe-mounted polydimethylsiloxane hollow fiber membrane directly imme

69 different substrates (cellulose acetate and polydimethylsiloxane) in air and find that across 5 orde

70 ti-trap device, consisting of a single PDMS (polydimethylsiloxane) layer, which can immobilize up to

71 fewer surface silanol groups, like oxidized polydimethylsiloxane, led to a large increase in the mob

72 row through microscopic gaps made of elastic polydimethylsiloxane material.

73 a multiwalled carbon nanotubes network and a poly(dimethylsiloxane) matrix for harvesting energy from

74 onalized silica nanoparticles suspended in a poly(dimethylsiloxane) matrix, the rheological-parameter

75 rsing graphene nanoplatelets (GNPs) within a polydimethylsiloxane matrix, we show that efficient ligh

76 utron spin echo measurements on an entangled polydimethylsiloxane melt under shear and demonstrate th

77 Here, wrinkle-patterned BaTiO(3) (BTO)/poly(dimethylsiloxane) membranes with finely controlled

78 rs are first immobilized on the surface of a poly(dimethylsiloxane) microchannel, followed by pumping

79 are cut, polished flat, and sealed against a polydimethylsiloxane microchannel.

80 ethylene terephthalate) membrane between two poly(dimethylsiloxane) microchannels.

81 ently, flow lithography relies on the use of polydimethylsiloxane microchannels, because the process

82 We report a robust, integrated poly(dimethylsiloxane) microchip interface for ESI-MS us

83 as validated by investigating the ability of polydimethylsiloxane microfabricated patches to fix micr

84 as an interconnect between two perpendicular poly(dimethylsiloxane) microfluidic channels.

85 rn can be localized within the channels of a poly(dimethylsiloxane) microfluidic device using an embe

86 ng of high-performance separation columns in poly(dimethylsiloxane) microfluidic devices having integ

87 f high-performance chromatography columns in poly(dimethylsiloxane) microfluidic devices made by mult

88 We integrate polydimethylsiloxane microfluidic channels with these SU

89 verall, the integrated system consisted of a polydimethylsiloxane microfluidic chip housing an aptame

90 This study reports an all-polydimethylsiloxane microfluidic chip integrated with s

91 the design, fabrication, and operation of a polydimethylsiloxane microfluidic device which enables t

92 a silicon-on-insulator wafer and bonded to a polydimethylsiloxane microfluidic injection system resul

93 A polydimethylsiloxane microfluidic structure has been des

94 Polydimethylsiloxane microfluidic valves and pumps are i

95 based in vitro kinase assay on an integrated polydimethylsiloxane microfluidics platform that can rep

96 croengineered substrate system consisting of poly(dimethylsiloxane) micropost arrays (PMAs) with tuna

97 s achievable by traction force microscopy or polydimethylsiloxane micropost arrays, which are the sta

98 uring of PEG-DA prepolymer introduced into a poly(dimethylsiloxane) mold.

99 formal transfer molding process using a thin polydimethylsiloxane mold bearing a negative array of MN

100 aster microfabrication ( approximately 1 d), polydimethylsiloxane molding (few hours), system setup a

101 ans of elastomeric models (polyacrylamide or polydimethylsiloxane) of a soft inclusion surrounded by

102 onsists of a 500 mum diameter well made from polydimethylsiloxane on an indium-tin oxide coated micro

103 Using a polydimethylsiloxane open-roof microdevice featuring tap

104 ared to those of two commercial SPME fibers [poly(dimethylsiloxane) (PDMS) and Carboxen-PDMS].

105 The immiscibility of poly(dimethylsiloxane) (PDMS) and ionic liquids (ILs) wa

106 concept, two nanoporous polymeric materials, poly(dimethylsiloxane) (PDMS) and PE, were used for stan

107 The introduction of poly(dimethylsiloxane) (PDMS) and soft lithography in th

108 Herein, a nanoscale poly(dimethylsiloxane) (PDMS) brush was employed to use

109 pumped through channels in one layer of the poly(dimethylsiloxane) (PDMS) device; as these cells rel

110 crochannels are molded onto the surface of a poly(dimethylsiloxane) (PDMS) elastomer and filled with

111 ic acid etching of a glass substrate using a poly(dimethylsiloxane) (PDMS) etch guide, we were able t

112 n the operation of an elastomeric valve in a poly(dimethylsiloxane) (PDMS) fabricated microchip and a

113 re compared to those from a commercial 7 mum poly(dimethylsiloxane) (PDMS) fiber.

114 ty, and entrapment of dye molecules in cured poly(dimethylsiloxane) (PDMS) films as a function of oli

115 studies have investigated the suitability of poly(dimethylsiloxane) (PDMS) for live cell culture.

116 While poly(dimethylsiloxane) (PDMS) has emerged as the most po

117 Poly(dimethylsiloxane) (PDMS) is a commonly used elastom

118 Poly(dimethylsiloxane) (PDMS) is likely the most popular

119 Poly(dimethylsiloxane) (PDMS) is one of the most conveni

120 Carboxy-functional poly(dimethylsiloxane) (PDMS) ligands are attached to th

121 ontaminants permeate through a spiral hollow poly(dimethylsiloxane) (PDMS) membrane and are carried a

122 HLB/poly(dimethylsiloxane) (PDMS) membranes deployed in flig

123 This new hybrid CE system consists of a poly(dimethylsiloxane) (PDMS) microchip sample injector

124 le, and regenerable lipid membrane arrays in poly(dimethylsiloxane) (PDMS) microchips for label-free

125 Gold nanoparticles were synthesized in a poly(dimethylsiloxane) (PDMS) microfluidic chip by using

126 edding Ag/AgCl electrodes within a two-layer poly(dimethylsiloxane) (PDMS) microfluidic chip where an

127 carried out using an integrated emitter in a poly(dimethylsiloxane) (PDMS) microfluidic chip.

128 The simple and easily scalable poly(dimethylsiloxane) (PDMS) microfluidic device was fa

129 This paper presents a novel poly(dimethylsiloxane) (PDMS) microfluidic immunosensor

130 The poly(dimethylsiloxane) (PDMS) molecular concentrator (1)

131 Finally, a poly(dimethylsiloxane) (PDMS) monolith modified on the s

132 e MBJs, glass substrates were patterned with poly(dimethylsiloxane) (PDMS) oligomers by thermally-ass

133 imensional (3D)-printed fluidic device where poly(dimethylsiloxane) (PDMS) or polystyrene (PS) were u

134 sed in refractive index matching monomers in poly(dimethylsiloxane) (PDMS) porous membrane.

135 140 mum in cross section, wall-coated with a poly(dimethylsiloxane) (PDMS) stationary phase.

136 used laser pulse and collected on a numbered poly(dimethylsiloxane) (PDMS) substrate with high viabil

137 Many advanced devices have been made from poly(dimethylsiloxane) (PDMS) to enable experiments, for

138 lium indium (EGaIn) microdroplets in uncured poly(dimethylsiloxane) (PDMS) to form electrically condu

139 Pressure-actuated poly(dimethylsiloxane) (PDMS) valves have been character

140 Poly(dimethylsiloxane) (PDMS) was determined to be an ex

141 osable sensor system was formed by bonding a poly(dimethylsiloxane) (PDMS) well to the glass substrat

142 to the working electrode by utilizing a thin poly(dimethylsiloxane) (PDMS) window.

143 dispersed in stretchable materials, such as poly(dimethylsiloxane) (PDMS), could create the next gen

144 The device, which is made from poly(dimethylsiloxane) (PDMS), implements cell-affinity

145 lectric-elastomer system, polyacrylamide and poly(dimethylsiloxane) (PDMS), is adapted for extrusion

146 ation method of polymeric nanostructure in a poly(dimethylsiloxane) (PDMS)-based microfluidic channel

147 To this end, a poly(dimethylsiloxane) (PDMS)-based microfluidic device

148 t single-molecule "DNA curtain" imaging with poly(dimethylsiloxane) (PDMS)-based microfluidics.

149 Poly(dimethylsiloxane) (PDMS)-based valves were used for

150 ma bonding like microfluidic devices made of poly(dimethylsiloxane) (PDMS).

151 ane as part of a microfluidic system made of poly(dimethylsiloxane) (PDMS).

152 yrex cap, and a cross-linked wall coating of poly(dimethylsiloxane) (PDMS).

153 xicity assay in microfluidic devices made of poly(dimethylsiloxane) (PDMS).

154 of materials including, but not limited to, poly(dimethylsiloxane) (PDMS).

155 A microfluidic device made of polydimethylsiloxane (PDMS) addresses key limitations in

156 g device using only a single layer of molded polydimethylsiloxane (PDMS) and a glass support substrat

157 consists of a spinning core made of uncured polydimethylsiloxane (PDMS) and fixed bilayer rings made

158 Ps) by equilibrating 13 silicones, including polydimethylsiloxane (PDMS) and low-density polyethylene

159 ultured single human epidermal stem cells on polydimethylsiloxane (PDMS) and polyacrylamide (PAAm) hy

160 Polydimethylsiloxane (PDMS) and Polyacrylamide (PAm) hyd

161 Performance evaluation of polydimethylsiloxane (PDMS) based long-acting (e.g. 3-5

162 The implementation in polystyrene (PS)/polydimethylsiloxane (PDMS) blends results in dynamicall

163 Our microfluidic LSPR chip integrates a polydimethylsiloxane (PDMS) channel bonded with a nanopl

164 olystyrene; PS) particles that flowed into a polydimethylsiloxane (PDMS) channel created charge-depen

165 cted water were estimated by partitioning to polydimethylsiloxane (PDMS) coated stir bars and analysi

166 ea for absorption of analytes onto a sol-gel polydimethylsiloxane (PDMS) coating for direct thermal d

167 as the printhead, we dispersed droplets in a polydimethylsiloxane (PDMS) continuous phase and subsequ

168 ic capillary and the coupling consisted in a polydimethylsiloxane (PDMS) cross connector working in t

169 onment, we use soft lithography to fabricate polydimethylsiloxane (PDMS) devices consisting of linear

170 inearly elastic polyacrylamide hydrogels and polydimethylsiloxane (PDMS) elastomers coated with ECM p

171 hase microextraction (SPME) using a Carboxen-Polydimethylsiloxane (PDMS) fibre and entrainment on Ten

172 Given the wide adoption of polydimethylsiloxane (PDMS) for the rapid fabrication of

173 and networks of nanochannels were created in polydimethylsiloxane (PDMS) from a surface pattern of el

174 resin particles suspended in a high-density polydimethylsiloxane (PDMS) glue, which is spread onto a

175 Passive equilibrium sampling with polydimethylsiloxane (PDMS) has the potential for unbias

176 The carbon nanotubes (CNTs) filled polydimethylsiloxane (PDMS) hybrid membrane was fabricat

177 settings, we fabricated a polycarbonate (PC)-polydimethylsiloxane (PDMS) hybrid microchip using a sim

178 modulation of a sensitive film composed of a polydimethylsiloxane (PDMS) layer incorporating molecule

179 of either a submerged argon bubble or a thin polydimethylsiloxane (PDMS) layer.

180 ells embedded in extracellular matrix, three polydimethylsiloxane (PDMS) layers were built into this

181 ized polystyrene (PS), polylactide (PLA), or polydimethylsiloxane (PDMS) macromonomer mediated by the

182 The polydimethylsiloxane (PDMS) membrane commonly used for s

183 In this process, the polydimethylsiloxane (PDMS) membrane was prepared by emp

184 lid interface formed between 1-octanol and a polydimethylsiloxane (PDMS) membrane, the IRF derived fr

185 roplet of suspended cells, encapsulated by a polydimethylsiloxane (PDMS) membrane.

186 ethanol acceptor phase in combination with a polydimethylsiloxane (PDMS) membrane.

187 ry bundle is achieved by fabricating bundled polydimethylsiloxane (PDMS) micro-pillars with graded he

188 e combine spatial and spectral encoding with polydimethylsiloxane (PDMS) microchambers for codetectio

189 ces pombe, we devised femtoliter cylindrical polydimethylsiloxane (PDMS) microchambers with varying e

190 microfluidic concentrator comprises a single polydimethylsiloxane (PDMS) microchannel onto which an i

191 structures, which can be transferred onto a polydimethylsiloxane (PDMS) microchannel through the sof

192 nd covered by a approximately 10 microm tall polydimethylsiloxane (PDMS) microchannel.

193 amera, and apply STICS to map liquid flow in polydimethylsiloxane (PDMS) microchannels.

194 Compared to polydimethylsiloxane (PDMS) microcontact printed (muprin

195 A hybrid glass-polydimethylsiloxane (PDMS) microdevice assembly is used

196 this purpose, a simple coupled-optical-fiber-polydimethylsiloxane (PDMS) microdevice was developed, t

197 A polydimethylsiloxane (PDMS) microfluidic channel is used

198 The glass surface of a glass-polydimethylsiloxane (PDMS) microfluidic channel was mod

199 ae), ranging in size from 1 to 6.3 mum, in a polydimethylsiloxane (PDMS) microfluidic channel with a

200 In contrast, using a polydimethylsiloxane (PDMS) microfluidic deoxygenation d

201 robic species within a disposable multilayer polydimethylsiloxane (PDMS) microfluidic device with an

202 A replica molded polydimethylsiloxane (PDMS) microfluidic device with nan

203 Recently, culturing living samples within polydimethylsiloxane (PDMS) microfluidic devices has fac

204 The DLC electrodes were integrated into polydimethylsiloxane (PDMS) microfluidic electrochemical

205 orogenic nucleotides (TPLFNs) and resealable polydimethylsiloxane (PDMS) microreactors.

206 tio soft lithography technique, we fabricate polydimethylsiloxane (PDMS) molds containing arrays of m

207 of a naphthopyran mechanophore embedded in a polydimethylsiloxane (PDMS) network.

208 A nanopatternable polydimethylsiloxane (PDMS) oligomer layer is demonstrat

209 Thin-film polydimethylsiloxane (PDMS) passive samplers were expose

210 ion method that exploits the relatively high polydimethylsiloxane (PDMS) permeability of H(2)S in com

211 droplets were closely packed in a two-layer polydimethylsiloxane (PDMS) platform and were flowed thr

212 nsitizing particles to specific locations on polydimethylsiloxane (PDMS) posts printed in a square ar

213 gel tube connected at both ends to a stiffer polydimethylsiloxane (PDMS) scaffold, creating an impeda

214 were cultured on thin, optically transparent polydimethylsiloxane (PDMS) sheets and then brought into

215 Measurements on soft polydimethylsiloxane (PDMS) show that the manufactured d

216 The chip was made from a polydimethylsiloxane (PDMS) slab and formed into a gourd

217 mmunoassay using an antibody microarray on a polydimethylsiloxane (PDMS) substrate modified with fluo

218 rfacial aspects of cancer cell phenotypes on polydimethylsiloxane (PDMS) substrates and indicated tha

219 ater detail, we created hard-soft-hard (HSH) polydimethylsiloxane (PDMS) substrates with alternating

220 rces enabled through microwells comprised of polydimethylsiloxane (PDMS) surfaces coated with a hydro

221 ver film substrates, fabricated on glass and polydimethylsiloxane (PDMS) templates, on surface-enhanc

222 kis(pentafluorophenyl)porphine (PtTFPP) into polydimethylsiloxane (PDMS) thin films.

223 structures from an aluminum tube template to polydimethylsiloxane (PDMS) via atomic layer deposition

224 ommercially available SPME fibre coated with polydimethylsiloxane (PDMS) was used.

225 jars with mum thin coatings of the silicone polydimethylsiloxane (PDMS) was validated and applied to

226 d on a combination of solid- and liquid-core polydimethylsiloxane (PDMS) waveguides that also provide

227 Macroscopic thimbles composed of polydimethylsiloxane (PDMS) were used to site-isolate Pd

228 A process to surface pattern polydimethylsiloxane (PDMS) with ferromagnetic structure

229 , the chip was composed of a single piece of polydimethylsiloxane (PDMS) with three parallel channels

230 As examples of potential applications, a polydimethylsiloxane (PDMS) wristband with an embedded m

231 This device, made from polydimethylsiloxane (PDMS), allows the samples to be lo

232 The majority of OOC devices are made from polydimethylsiloxane (PDMS), an elastomer widely used in

233 e to simplify operation, is made entirely of polydimethylsiloxane (PDMS), and does not require any ad

234 The device is made of polydimethylsiloxane (PDMS), and ionic liquid is used to

235 ethylene (LDPE), polyoxymethylene (POM), and polydimethylsiloxane (PDMS), and organisms ranged from p

236 lture devices, such as those fabricated from polydimethylsiloxane (PDMS), collective understanding of

237 ted diluents with a poly(d,l-lactide) (PLA), polydimethylsiloxane (PDMS), or polystyrene (PS) macromo

238 tion efficiencies are compared to commercial polydimethylsiloxane (PDMS), polydimethylsiloxane/diviny

239 Nanowires are then etched and embedded into polydimethylsiloxane (PDMS), thereby realizing a device

240 tration on three different materials (filled polydimethylsiloxane (PDMS), unfilled PDMS, and ceramic

241 oid culture devices made of oxygen-permeable polydimethylsiloxane (PDMS), with which hypoxia in the c

242 nsional (3D) tissue culture platform using a polydimethylsiloxane (PDMS)-based hanging drop array (PD

243 n of three-dimensional master structures for polydimethylsiloxane (PDMS)-based microfluidics.

244 es, which interface the nanodroplets through polydimethylsiloxane (PDMS)-carbon composite membranes.

245 oxygen-generating biomaterial in the form of polydimethylsiloxane (PDMS)-encapsulated solid calcium p

246 cting the passive pump driven flow rate in a polydimethylsiloxane (PDMS)-glass hybrid microfluidic sy

247 s of ultrasound, generated by a carbon black/polydimethylsiloxane (PDMS)-photoacoustic lens, were int

248 oncentration platform into a flexible hybrid polydimethylsiloxane (PDMS)-polycarbonate (PC) microflui

249 s embedded in a flexible supporting layer of polydimethylsiloxane (PDMS).

250 o fabricate uniform buckled NRs supported on polydimethylsiloxane (PDMS).

251 n (SPME) based on a sorptive polymer such as polydimethylsiloxane (PDMS).

252 ous silicon (pSi), TiO2 nanotube arrays, and polydimethylsiloxane (PDMS).

253 lithography with the patterns transferred to polydimethylsiloxane (PDMS).

254 y embedding carbon nanoparticles (soot) into Polydimethylsiloxane (PDMS).

255 ary column coated with a 7 mum thick film of polydimethylsiloxane (PDMS).

256 deformability of elastomeric materials like polydimethylsiloxane (PDMS).

257 rable liquid polymer of specific interest is polydimethylsiloxane (PDMS).

258 The detection of phenol using a hybrid polydimethylsiloxane (PDMS)/glass chronoimpedimetric mic

259 in, we report a versatile and cost-effective polydimethylsiloxane (PDMS)/paper hybrid microfluidic de

260 Four SPME fibre coatings including polydimethylsiloxane (PDMS, 100 mum), PDMS/divinylbenzen

261 ycidyl ether or dicarboxylic acid terminated polydimethylsiloxane (PDMS-DE or PDMS-DC) were encapsula

262 ting was imprinted on aerogel (n = 1.08) and polydimethylsiloxane (PDMS; n = 1.4) substrates.

263 on between two identical OFS (using SU-8 and poly(dimethylsiloxane), PDMS) against the 36 most common

264 walls was formed by placing a 620 mum thick poly(dimethylsiloxane), PDMS, gasket with an opening of

265 2,3-tributylglycerol) and a low-density oil (polydimethylsiloxane, PDMS) and describe a range of acti

266 artially embedded in a solid substrate (e.g. polydimethylsiloxane, PDMS).

267 of HMDSO, octamethyltrisiloxane (OMTSO) and polydimethylsiloxane (PDMSO) were also studied.

268 g NW devices on diverse substrates including polydimethylsiloxane, Petri dishes, Kapton tapes, therma

269 Here, using submicrometer polydimethylsiloxane pillars as substrates for cell spre

270 e with a comb electrode layout fabricated in polydimethylsiloxane (PMDS) and glass.

271 tion in flow mode is achieved using a hybrid polydimethylsiloxane/polyester amperometric lab-on-a-chi

272 cle proteins, carbohydrates, algae, mussels, polydimethylsiloxane, polyethylene, polyoxymethylene, po

273 t Pt(1)(0) by reducing H(2)PtCl(6) in liquid polydimethylsiloxane-polyethylene glycol (PDMS-PEG) (Pt(

274 Herein we report a network of poly(dimethylsiloxane) polymer chains crosslinked by coo

275 solutions by equilibrium partitioning from a poly(dimethylsiloxane) polymer preloaded with the chemic

276 ped a method for attaching lipid bilayers to polydimethylsiloxane polymer supports, producing "soft b

277 The present study demonstrates that even a polydimethylsiloxane silicone oil, although highly visco

278 Using a previously developed polydimethylsiloxane slab-based approach to confine cell

279 ft fluoropolymer skin layers on pre-strained poly(dimethylsiloxane) slabs achieved crack-free surface

280 -ion full battery based on graphene-modified poly(dimethylsiloxane) sponge electrodes and an elastic

281 re prepared using a 3D interconnected porous polydimethylsiloxane sponge based on sugar cubes.

282 bstrate using a sub-100 mum stripe-patterned polydimethylsiloxane stamp for aligned carbon nanotube g

283 ading and differentiation were unaffected by polydimethylsiloxane stiffness.

284 Solid phase microextraction (SPME), polydimethylsiloxane stir bar sorptive extraction, and T

285 trates, we plated epithelial monolayers onto polydimethylsiloxane substrata with a range of viscositi

286 nificantly alter the rigidity of elastomeric poly(dimethylsiloxane) substrates and a new class of 2D

287 Micropatterned poly(dimethylsiloxane) substrates fabricated by soft lit

288 Hippocampal neurons were cultured on polydimethylsiloxane substrates fabricated to have simil

289 by seeding NIH 3T3 fibroblasts on glass and polydimethylsiloxane substrates of varying stiffnesses f

290 of Pseudomonas aeruginosa PA14 on glass and polydimethylsiloxane surfaces.

291 d diverse commonly used elastomers including polydimethylsiloxane Sylgard 184, polyurethane, latex, V

292 glass hosting a microfluidic network made in polydimethylsiloxane that includes thermally actuated mi

293 osited on glass slides and used as molds for polydimethylsiloxane to obtain nanovoid structures.

294 le technique that employs an antibody coated polydimethylsiloxane tube is used for effective capturin

295 y is effectively suppressed by interposing a polydimethylsiloxane wall between adjacent QCM electrode

296 tes the stretchability and transparency of a polydimethylsiloxane waveguide, while also serving as a

297 PtBA = poly(tert-butyl acrylate), and PDMS = polydimethylsiloxane) were created by the living crystal

298 ng of low-molecular-weight polystyrene-block-polydimethylsiloxane with a lattice spacing of 11 nm on

299 sed block copolymer poly(3-hexylthiophene)-b-poly(dimethylsiloxane) yields cylindrical micelles with

300 cent mouthguard consisting of the zinc oxide-poly(dimethylsiloxane) (ZnO-PDMS) nanocomposite to detec