ライフサイエンスコーパス: polydimethylsiloxane

1 lease surfaces based on silicone oil-infused polydimethylsiloxane.

2 itional microfluidic devices fabricated with polydimethylsiloxane.

3 lending (C(38)H(34)P(2))MnBr(4) powders with polydimethylsiloxane.

4 The technique was verified using bilayered polydimethylsiloxane.

5 of thin films of the biocompatible elastomer polydimethylsiloxane.

6 cated using conventional soft lithography of polydimethylsiloxane.

7 trodes and of gold electrodes patterned onto polydimethylsiloxane.

8 viscosity, we probe this relationship using polydimethylsiloxane, a substrate whose mechanical prope

9 o wet a low-energy surface (freshly prepared polydimethylsiloxane); although, their contact angles we

10 an Chip microfluidic devices fabricated from polydimethylsiloxane and gas impermeable polycarbonate m

11 ed into the chamber dome of the microfluidic polydimethylsiloxane and glass platform in order to prov

12 using a microfluidic device, generated from polydimethylsiloxane and glass slide, placed on a motori

13 is inserted between a top layer, made of Al/polydimethylsiloxane, and a bottom layer, made of Al.

14 bstrate to a variety of hosts, including Si, polydimethylsiloxane, and metal-coated substrates.

15 ells (NALM6, K562, EL4) were co-incubated on polydimethylsiloxane arrays of sub-nanoliter wells (nano

16 ed with T3/PC71 BM blend based devices using polydimethylsiloxane as additive.

17 pentasiloxane as the responsive material and polydimethylsiloxane as the matrix material.

18 based on the self-assembly of polyethylene-b-polydimethylsiloxane-b-polyethylene triblock copolymers.

19 ven participants were conducted by sliding a polydimethylsiloxane ball against the volar forearms to

20 Here, we report a polydimethylsiloxane-based device with two on-chip fluid

21 ano-adhesive bonding technique to create non-polydimethylsiloxane-based devices.

22 psules using iron oxide nanoparticles within polydimethylsiloxane-based shells.

23 ion of shock wave in sucrose crystal through polydimethylsiloxane binder.

24 are prepared via the cooperative assembly of polydimethylsiloxane-block-poly(ethylene oxide) (PDMS-b-

25 This trait is realized in polydimethylsiloxane bottlebrush networks using thermore

26 preparation of the most common SCALS system: polydimethylsiloxane bound to silica surfaces via silane

27 ble-width capillary channels fabricated from polydimethylsiloxane by conventional soft lithography, a

28 Carboxen/polydimethylsiloxane (CAR/PDMS) and polydimethylsiloxane

29 The photoactuation of pen arrays made of polydimethylsiloxane carbon nanotube composites is explo

30 consists of a thin wire coated with carboxen/polydimethylsiloxane (carboxen/PDMS) material, wound in

31 sing a variety of chlorinated solvents and a polydimethylsiloxane/carboxen (PDMS/CAR) SPME fiber, mos

32 The optimal HS-SPME conditions with polydimethylsiloxane/carboxen/divinylbenzene (PDMS/CAR/D

33 The optimal HS-SPME conditions with polydimethylsiloxane/carboxen/divinylbenzene (PDMS/CAR/D

34 ned using a reversibly sealable, elastomeric polydimethylsiloxane cassette, fabricated with preformed

35 Additionally, polydimethylsiloxane coated thin-film was applied for ex

36 rowth of cells on a photoelastic substratum, polydimethylsiloxane coated with a near monolayer of fib

37 less steel/polyester fiber blended yarn, the polydimethylsiloxane-coated energy-harvesting yarn, and

38 cies were sampled in the HS using a Carboxen/polydimethylsiloxane-coated SPME fiber.

39 We prepared polydimethylsiloxane-coated stainless steel meshes for e

40 r Bar Sorptive Extraction (SBSE) involving a polydimethylsiloxane-coated stir bar with thermal desorp

41 nm) inclined guiding track ablated into the polydimethylsiloxane-coated surface of the channel with

42 stainless steel screens coated with a sticky polydimethylsiloxane coating for collecting LVPCs aeroso

43 end with a multi-walled carbon nanotube and polydimethylsiloxane composite coating.

44 stretchable short carbon fibre incorporated Polydimethylsiloxane composite, enabled by a radio frequ

45 The dependence on polydimethylsiloxane devices greatly limits the range of

46 Hybrid glass-polydimethylsiloxane diaphragm micropumps integrated int

47 The combination of a microstructured polydimethylsiloxane dielectric and the high-mobility se

48 ation of this technique is demonstrated with polydimethylsiloxane-divinylbenzene (PDMS-DVB) and polya

49 Carboxen/polydimethylsiloxane (CAR/PDMS) and polydimethylsiloxane/divinylbenzene (PDMS/DVB) TFME samp

50 d to commercial polydimethylsiloxane (PDMS), polydimethylsiloxane/divinylbenzene (PDMS/DVB), and poly

51 ent polymers such as divinylbenzene/carboxen/polydimethylsiloxane (DVB/Car/PDMS) and octadecyl/benzen

52 min at 50 C using a divinylbenzene/carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fiber was optimal.

53 50 degrees C using a divinylbenzene/carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fiber was optimal.

54 action (HS-SPME) with a 65 um divinylbenzene/polydimethylsiloxane (DVB/PDMS) fiber and gas chromatogr

55 by the steam-induced degradation of the base polydimethylsiloxane elastomer and the polyamide resin a

56 by the steam-induced degradation of the base polydimethylsiloxane elastomer and the polyamide resin a

57 dy, we introduce the use of a micropatterned polydimethylsiloxane encapsulation layer to form narrow

58 able hydrophobic adhesive (UIHA) composed of polydimethylsiloxane, entangled macromolecular silicone

59 The optimized operating conditions (Carboxen/Polydimethylsiloxane fiber coating, 66 degrees C, 20 min

60 ion conditions using divinylbenzene-carboxen-polydimethylsiloxane fiber were: temperature of 50 degre

61 In this study, we explored the preloading of polydimethylsiloxane fiber with stable isotope labeled a

62 The swimmer consists of a polydimethylsiloxane filament with a short, rigid head a

63 dulation of a switch-containing cross-linked polydimethylsiloxane film using light and/or heat stimul

64 Here, a polydimethylsiloxane-free MPS that enables continuous dy

65 flow sample streams are coupled to a hybrid polydimethylsiloxane-glass microfluidic device capable o

66 A microreactor fabricated from polydimethylsiloxane/glass was silanated with trimethoxy

67 tigate the adhesion behavior of soft elastic polydimethylsiloxane hemispheres (modulus ranging from 0

68 um supported, hydrophilic-lipophilic balance/polydimethylsiloxane (HLB/PDMS) TF-SPME device that enab

69 vercoating of hydrophilic-lipophilic balance/polydimethylsiloxane (HLB/PDMS) thin films to increase t

70 ptor phase is flowed through a probe-mounted polydimethylsiloxane hollow fiber membrane directly imme

71 different substrates (cellulose acetate and polydimethylsiloxane) in air and find that across 5 orde

72 ductivity measurements using a pre-patterned polydimethylsiloxane layer on a silicon substrate provid

73 ti-trap device, consisting of a single PDMS (polydimethylsiloxane) layer, which can immobilize up to

74 dot-gold nanoparticles is placed between two polydimethylsiloxane layers to promote portability and i

75 fewer surface silanol groups, like oxidized polydimethylsiloxane, led to a large increase in the mob

76 row through microscopic gaps made of elastic polydimethylsiloxane material.

77 rsing graphene nanoplatelets (GNPs) within a polydimethylsiloxane matrix, we show that efficient ligh

78 utron spin echo measurements on an entangled polydimethylsiloxane melt under shear and demonstrate th

79 are cut, polished flat, and sealed against a polydimethylsiloxane microchannel.

80 ently, flow lithography relies on the use of polydimethylsiloxane microchannels, because the process

81 as validated by investigating the ability of polydimethylsiloxane microfabricated patches to fix micr

82 We integrate polydimethylsiloxane microfluidic channels with these SU

83 verall, the integrated system consisted of a polydimethylsiloxane microfluidic chip housing an aptame

84 This study reports an all-polydimethylsiloxane microfluidic chip integrated with s

85 the design, fabrication, and operation of a polydimethylsiloxane microfluidic device which enables t

86 a silicon-on-insulator wafer and bonded to a polydimethylsiloxane microfluidic injection system resul

87 a silicon-on-insulator wafer and bonded to a polydimethylsiloxane microfluidic injection system resul

88 A polydimethylsiloxane microfluidic structure has been des

89 Polydimethylsiloxane microfluidic valves and pumps are i

90 The compatibility with polydimethylsiloxane microfluidics is proven by recordin

91 based in vitro kinase assay on an integrated polydimethylsiloxane microfluidics platform that can rep

92 s achievable by traction force microscopy or polydimethylsiloxane micropost arrays, which are the sta

93 formal transfer molding process using a thin polydimethylsiloxane mold bearing a negative array of MN

94 aster microfabrication ( approximately 1 d), polydimethylsiloxane molding (few hours), system setup a

95 ans of elastomeric models (polyacrylamide or polydimethylsiloxane) of a soft inclusion surrounded by

96 , and tetradecamethylcycloheptasiloxane or a polydimethylsiloxane oil containing low molecular weight

97 h) were patterned in the silicone elastomer, polydimethylsiloxane on a microscope coverslip base.

98 onsists of a 500 mum diameter well made from polydimethylsiloxane on an indium-tin oxide coated micro

99 Using a polydimethylsiloxane open-roof microdevice featuring tap

100 rbed swarmer cells of Serratia marcescens to polydimethylsiloxane or polystyrene.

101 A polydimethylsiloxane-patterned electrode surface was use

102 A microfluidic device made of polydimethylsiloxane (PDMS) addresses key limitations in

103 g device using only a single layer of molded polydimethylsiloxane (PDMS) and a glass support substrat

104 resistive material-graphite frameworks (GFs)/polydimethylsiloxane (PDMS) and dielectric elastomer act

105 consists of a spinning core made of uncured polydimethylsiloxane (PDMS) and fixed bilayer rings made

106 Ps) by equilibrating 13 silicones, including polydimethylsiloxane (PDMS) and low-density polyethylene

107 tigate the participation of TSP2 in the FBR, polydimethylsiloxane (PDMS) and oxidized PDMS (ox-PDMS)

108 ultured single human epidermal stem cells on polydimethylsiloxane (PDMS) and polyacrylamide (PAAm) hy

109 Polydimethylsiloxane (PDMS) and Polyacrylamide (PAm) hyd

110 of ROS occurs with various polymers, such as polydimethylsiloxane (PDMS) and polypropylene (PP), and

111 dding by coating the equal-volume mixture of polydimethylsiloxane (PDMS) and silicone oil.

112 Equilibrium passive sampling employing polydimethylsiloxane (PDMS) as a sampling phase can be u

113 Performance evaluation of polydimethylsiloxane (PDMS) based long-acting (e.g. 3-5

114 The implementation in polystyrene (PS)/polydimethylsiloxane (PDMS) blends results in dynamicall

115 This work presents how polydimethylsiloxane (PDMS) can be bonded selectively us

116 ing the pre-synthesized disulfide-containing polydimethylsiloxane (PDMS) chains with tetra-arm polyet

117 Our microfluidic LSPR chip integrates a polydimethylsiloxane (PDMS) channel bonded with a nanopl

118 olystyrene; PS) particles that flowed into a polydimethylsiloxane (PDMS) channel created charge-depen

119 Novel techniques in polydimethylsiloxane (PDMS) chip fabrication are describ

120 cted water were estimated by partitioning to polydimethylsiloxane (PDMS) coated stir bars and analysi

121 ea for absorption of analytes onto a sol-gel polydimethylsiloxane (PDMS) coating for direct thermal d

122 studies of up to 2-year duration, we compare polydimethylsiloxane (PDMS) coatings of the same composi

123 as the printhead, we dispersed droplets in a polydimethylsiloxane (PDMS) continuous phase and subsequ

124 ic capillary and the coupling consisted in a polydimethylsiloxane (PDMS) cross connector working in t

125 st commercially available SLA resins inhibit polydimethylsiloxane (PDMS) curing, impeding reliable re

126 onment, we use soft lithography to fabricate polydimethylsiloxane (PDMS) devices consisting of linear

127 inearly elastic polyacrylamide hydrogels and polydimethylsiloxane (PDMS) elastomers coated with ECM p

128 hase microextraction (SPME) using a Carboxen-Polydimethylsiloxane (PDMS) fibre and entrainment on Ten

129 ial (glass) and soft and flexible materials (polydimethylsiloxane (PDMS) films and poly-L-lactic acid

130 Passive equilibrium sampling (PES) with polydimethylsiloxane (PDMS) followed by solid phase extr

131 Given the wide adoption of polydimethylsiloxane (PDMS) for the rapid fabrication of

132 and networks of nanochannels were created in polydimethylsiloxane (PDMS) from a surface pattern of el

133 resin particles suspended in a high-density polydimethylsiloxane (PDMS) glue, which is spread onto a

134 Passive equilibrium sampling with polydimethylsiloxane (PDMS) has the potential for unbias

135 The carbon nanotubes (CNTs) filled polydimethylsiloxane (PDMS) hybrid membrane was fabricat

136 settings, we fabricated a polycarbonate (PC)-polydimethylsiloxane (PDMS) hybrid microchip using a sim

137 Polydimethylsiloxane (PDMS) is directly mounted on the c

138 modulation of a sensitive film composed of a polydimethylsiloxane (PDMS) layer incorporating molecule

139 of either a submerged argon bubble or a thin polydimethylsiloxane (PDMS) layer.

140 ells embedded in extracellular matrix, three polydimethylsiloxane (PDMS) layers were built into this

141 ized polystyrene (PS), polylactide (PLA), or polydimethylsiloxane (PDMS) macromonomer mediated by the

142 UiO-66 family were aligned and captured in a polydimethylsiloxane (PDMS) matrix using this approach.

143 The polydimethylsiloxane (PDMS) membrane commonly used for s

144 In this process, the polydimethylsiloxane (PDMS) membrane was prepared by emp

145 lid interface formed between 1-octanol and a polydimethylsiloxane (PDMS) membrane, the IRF derived fr

146 ethanol acceptor phase in combination with a polydimethylsiloxane (PDMS) membrane.

147 roplet of suspended cells, encapsulated by a polydimethylsiloxane (PDMS) membrane.

148 Polydimethylsiloxane (PDMS) membranes exhibit significan

149 ry bundle is achieved by fabricating bundled polydimethylsiloxane (PDMS) micro-pillars with graded he

150 th 3, 5, and 12 mum pore sizes and capillary polydimethylsiloxane (PDMS) microarrays (20 mum x 35 mum

151 e combine spatial and spectral encoding with polydimethylsiloxane (PDMS) microchambers for codetectio

152 ces pombe, we devised femtoliter cylindrical polydimethylsiloxane (PDMS) microchambers with varying e

153 microfluidic concentrator comprises a single polydimethylsiloxane (PDMS) microchannel onto which an i

154 structures, which can be transferred onto a polydimethylsiloxane (PDMS) microchannel through the sof

155 nd covered by a approximately 10 microm tall polydimethylsiloxane (PDMS) microchannel.

156 amera, and apply STICS to map liquid flow in polydimethylsiloxane (PDMS) microchannels.

157 Compared to polydimethylsiloxane (PDMS) microcontact printed (muprin

158 A hybrid glass-polydimethylsiloxane (PDMS) microdevice assembly is used

159 this purpose, a simple coupled-optical-fiber-polydimethylsiloxane (PDMS) microdevice was developed, t

160 A polydimethylsiloxane (PDMS) microfluidic channel is used

161 The glass surface of a glass-polydimethylsiloxane (PDMS) microfluidic channel was mod

162 ae), ranging in size from 1 to 6.3 mum, in a polydimethylsiloxane (PDMS) microfluidic channel with a

163 In contrast, using a polydimethylsiloxane (PDMS) microfluidic deoxygenation d

164 robic species within a disposable multilayer polydimethylsiloxane (PDMS) microfluidic device with an

165 A replica molded polydimethylsiloxane (PDMS) microfluidic device with nan

166 onfine the plasma-treatment zone in a single polydimethylsiloxane (PDMS) microfluidic device.

167 Recently, culturing living samples within polydimethylsiloxane (PDMS) microfluidic devices has fac

168 The DLC electrodes were integrated into polydimethylsiloxane (PDMS) microfluidic electrochemical

169 amental technological advance for multilayer polydimethylsiloxane (PDMS) microfluidics.

170 orogenic nucleotides (TPLFNs) and resealable polydimethylsiloxane (PDMS) microreactors.

171 The effect of gas-entrapping polydimethylsiloxane (PDMS) microstructures on the dynam

172 One of the main components, polydimethylsiloxane (PDMS) microvalves, is pivotal to F

173 tio soft lithography technique, we fabricate polydimethylsiloxane (PDMS) molds containing arrays of m

174 of a naphthopyran mechanophore embedded in a polydimethylsiloxane (PDMS) network.

175 A nanopatternable polydimethylsiloxane (PDMS) oligomer layer is demonstrat

176 Thin-film polydimethylsiloxane (PDMS) passive samplers were expose

177 ion method that exploits the relatively high polydimethylsiloxane (PDMS) permeability of H(2)S in com

178 droplets were closely packed in a two-layer polydimethylsiloxane (PDMS) platform and were flowed thr

179 carried out by an example of thin film named polydimethylsiloxane (PDMS) polymer.

180 icillamine (SNAP), is covalently linked to a polydimethylsiloxane (PDMS) polymer.

181 rrihydrite-coated sand, ceramic beads, and a polydimethylsiloxane (PDMS) pore network show a large in

182 nsitizing particles to specific locations on polydimethylsiloxane (PDMS) posts printed in a square ar

183 gel tube connected at both ends to a stiffer polydimethylsiloxane (PDMS) scaffold, creating an impeda

184 e, easily replicable sampling strategy using polydimethylsiloxane (PDMS) sheets alongside a represent

185 were cultured on thin, optically transparent polydimethylsiloxane (PDMS) sheets and then brought into

186 Measurements on soft polydimethylsiloxane (PDMS) show that the manufactured d

187 The chip was made from a polydimethylsiloxane (PDMS) slab and formed into a gourd

188 nd alternating-current SICM imaging modes on polydimethylsiloxane (PDMS) structures.

189 nal microstrip patch antenna fabricated on a Polydimethylsiloxane (PDMS) substrate for potential use

190 mmunoassay using an antibody microarray on a polydimethylsiloxane (PDMS) substrate modified with fluo

191 rfacial aspects of cancer cell phenotypes on polydimethylsiloxane (PDMS) substrates and indicated tha

192 ater detail, we created hard-soft-hard (HSH) polydimethylsiloxane (PDMS) substrates with alternating

193 lets, we fabricate a lotus leaf-inspired ZnO-Polydimethylsiloxane (PDMS) superhydrophobic solid-liqui

194 rces enabled through microwells comprised of polydimethylsiloxane (PDMS) surfaces coated with a hydro

195 ver film substrates, fabricated on glass and polydimethylsiloxane (PDMS) templates, on surface-enhanc

196 kis(pentafluorophenyl)porphine (PtTFPP) into polydimethylsiloxane (PDMS) thin films.

197 stiff skin forms on surface areas of a flat polydimethylsiloxane (PDMS) upon exposure to focused ion

198 The wide array of polydimethylsiloxane (PDMS) variants available on the ma

199 structures from an aluminum tube template to polydimethylsiloxane (PDMS) via atomic layer deposition

200 Hybrid glass-polydimethylsiloxane (PDMS) wafer-scale construction is

201 ommercially available SPME fibre coated with polydimethylsiloxane (PDMS) was used.

202 jars with mum thin coatings of the silicone polydimethylsiloxane (PDMS) was validated and applied to

203 d on a combination of solid- and liquid-core polydimethylsiloxane (PDMS) waveguides that also provide

204 Macroscopic thimbles composed of polydimethylsiloxane (PDMS) were used to site-isolate Pd

205 by patterning a deformable elastomer such as polydimethylsiloxane (PDMS) with a photolithographically

206 A process to surface pattern polydimethylsiloxane (PDMS) with ferromagnetic structure

207 This gripper is built on Polydimethylsiloxane (PDMS) with the soft material casti

208 , the chip was composed of a single piece of polydimethylsiloxane (PDMS) with three parallel channels

209 As examples of potential applications, a polydimethylsiloxane (PDMS) wristband with an embedded m

210 f bare die ICs, and examine the potential of polydimethylsiloxane (PDMS), a moisture-permeable elasto

211 This device, made from polydimethylsiloxane (PDMS), allows the samples to be lo

212 The majority of OOC devices are made from polydimethylsiloxane (PDMS), an elastomer widely used in

213 e to simplify operation, is made entirely of polydimethylsiloxane (PDMS), and does not require any ad

214 The device is made of polydimethylsiloxane (PDMS), and ionic liquid is used to

215 ethylene (LDPE), polyoxymethylene (POM), and polydimethylsiloxane (PDMS), and organisms ranged from p

216 lture devices, such as those fabricated from polydimethylsiloxane (PDMS), collective understanding of

217 ted diluents with a poly(d,l-lactide) (PLA), polydimethylsiloxane (PDMS), or polystyrene (PS) macromo

218 selection of the most used binders, namely, polydimethylsiloxane (PDMS), polyacrylonitrile (PAN), po

219 tion efficiencies are compared to commercial polydimethylsiloxane (PDMS), polydimethylsiloxane/diviny

220 Instead of polydimethylsiloxane (PDMS), SU-8 aided adhesive bonding

221 Nanowires are then etched and embedded into polydimethylsiloxane (PDMS), thereby realizing a device

222 tration on three different materials (filled polydimethylsiloxane (PDMS), unfilled PDMS, and ceramic

223 oid culture devices made of oxygen-permeable polydimethylsiloxane (PDMS), with which hypoxia in the c

224 nsional (3D) tissue culture platform using a polydimethylsiloxane (PDMS)-based hanging drop array (PD

225 A polydimethylsiloxane (PDMS)-based microfluidic chip with

226 icrofluidic device materials, we introduce a polydimethylsiloxane (PDMS)-based microfluidic device an

227 ures, allowing for the rapid construction of polydimethylsiloxane (PDMS)-based microfluidic devices.

228 n of three-dimensional master structures for polydimethylsiloxane (PDMS)-based microfluidics.

229 es, which interface the nanodroplets through polydimethylsiloxane (PDMS)-carbon composite membranes.

230 oxygen-generating biomaterial in the form of polydimethylsiloxane (PDMS)-encapsulated solid calcium p

231 cting the passive pump driven flow rate in a polydimethylsiloxane (PDMS)-glass hybrid microfluidic sy

232 s of ultrasound, generated by a carbon black/polydimethylsiloxane (PDMS)-photoacoustic lens, were int

233 oncentration platform into a flexible hybrid polydimethylsiloxane (PDMS)-polycarbonate (PC) microflui

234 ous silicon (pSi), TiO2 nanotube arrays, and polydimethylsiloxane (PDMS).

235 lithography with the patterns transferred to polydimethylsiloxane (PDMS).

236 y embedding carbon nanoparticles (soot) into Polydimethylsiloxane (PDMS).

237 ary column coated with a 7 mum thick film of polydimethylsiloxane (PDMS).

238 deformability of elastomeric materials like polydimethylsiloxane (PDMS).

239 pillaries, all fabricated by micromolding of polydimethylsiloxane (PDMS).

240 noparticle (AuNP) array supported by elastic polydimethylsiloxane (PDMS).

241 rable liquid polymer of specific interest is polydimethylsiloxane (PDMS).

242 s embedded in a flexible supporting layer of polydimethylsiloxane (PDMS).

243 o fabricate uniform buckled NRs supported on polydimethylsiloxane (PDMS).

244 n (SPME) based on a sorptive polymer such as polydimethylsiloxane (PDMS).

245 The detection of phenol using a hybrid polydimethylsiloxane (PDMS)/glass chronoimpedimetric mic

246 in, we report a versatile and cost-effective polydimethylsiloxane (PDMS)/paper hybrid microfluidic de

247 ith an HIV-detecting reporter cell line in a polydimethylsiloxane (PDMS)/polystyrene array of nanolit

248 rophobic membrane and sealed with a layer of polydimethylsiloxane (PDMS); this CF is used as a resist

249 Four SPME fibre coatings including polydimethylsiloxane (PDMS, 100 mum), PDMS/divinylbenzen

250 ycidyl ether or dicarboxylic acid terminated polydimethylsiloxane (PDMS-DE or PDMS-DC) were encapsula

251 ting was imprinted on aerogel (n = 1.08) and polydimethylsiloxane (PDMS; n = 1.4) substrates.

252 2,3-tributylglycerol) and a low-density oil (polydimethylsiloxane, PDMS) and describe a range of acti

253 artially embedded in a solid substrate (e.g. polydimethylsiloxane, PDMS).

254 of HMDSO, octamethyltrisiloxane (OMTSO) and polydimethylsiloxane (PDMSO) were also studied.

255 g NW devices on diverse substrates including polydimethylsiloxane, Petri dishes, Kapton tapes, therma

256 Here, using submicrometer polydimethylsiloxane pillars as substrates for cell spre

257 Using submicrometer, E-cadherin-coated polydimethylsiloxane pillars, we find that cells generat

258 e with a comb electrode layout fabricated in polydimethylsiloxane (PMDS) and glass.

259 tion in flow mode is achieved using a hybrid polydimethylsiloxane/polyester amperometric lab-on-a-chi

260 cle proteins, carbohydrates, algae, mussels, polydimethylsiloxane, polyethylene, polyoxymethylene, po

261 t Pt(1)(0) by reducing H(2)PtCl(6) in liquid polydimethylsiloxane-polyethylene glycol (PDMS-PEG) (Pt(

262 ped a method for attaching lipid bilayers to polydimethylsiloxane polymer supports, producing "soft b

263 n boundary in a self-assembled polystyrene-b-polydimethylsiloxane (PS-PDMS) double-gyroid (DG) formin

264 new magnetic poly linoleic acid-polystyrene-polydimethylsiloxane (PSt-PLina-PDMS) hydrophobic graft

265 Our technique uses a photocurable polydimethylsiloxane resin that is 3D printed into compl

266 By designing a quartz/polydimethylsiloxane semirigid stamp and adapting a stan

267 e replicates of the chip were produced using polydimethylsiloxane silicone elastomer and these replic

268 Further, polydimethylsiloxane silicone oil failed to serve as an

269 The present study demonstrates that even a polydimethylsiloxane silicone oil, although highly visco

270 Polydimethylsiloxane (silicone rubber) disks and cellulo

271 Using a previously developed polydimethylsiloxane slab-based approach to confine cell

272 ocol can be implemented by a researcher with polydimethylsiloxane soft lithography and cell culture e

273 re prepared using a 3D interconnected porous polydimethylsiloxane sponge based on sugar cubes.

274 bstrate using a sub-100 mum stripe-patterned polydimethylsiloxane stamp for aligned carbon nanotube g

275 ading and differentiation were unaffected by polydimethylsiloxane stiffness.

276 Solid phase microextraction (SPME), polydimethylsiloxane stir bar sorptive extraction, and T

277 al (3D) EHTs were integrated with an elastic polydimethylsiloxane strip providing mechanical preload

278 trates, we plated epithelial monolayers onto polydimethylsiloxane substrata with a range of viscositi

279 he microfluidic reactor was fabricated using polydimethylsiloxane substrate comprising of a central m

280 ealing a RP-T50 film coated on a stretchable polydimethylsiloxane substrate spontaneously generates w

281 The immunosensor is integrated on a polydimethylsiloxane substrate, with a compact size suit

282 Hippocampal neurons were cultured on polydimethylsiloxane substrates fabricated to have simil

283 by seeding NIH 3T3 fibroblasts on glass and polydimethylsiloxane substrates of varying stiffnesses f

284 of Pseudomonas aeruginosa PA14 on glass and polydimethylsiloxane surfaces.

285 d diverse commonly used elastomers including polydimethylsiloxane Sylgard 184, polyurethane, latex, V

286 glass hosting a microfluidic network made in polydimethylsiloxane that includes thermally actuated mi

287 ched to polystyrene beads or to fragments of polydimethylsiloxane, the bacteria generated both transl

288 ontaining appropriate aqueous solution and a polydimethylsiloxane thin film spiked with target compou

289 g neonatal rat ventricular cardiomyocytes on polydimethylsiloxane thin films micropatterned with extr

290 The Polydimethylsiloxane thin sidewalls of the microfluidic

291 osited on glass slides and used as molds for polydimethylsiloxane to obtain nanovoid structures.

292 le technique that employs an antibody coated polydimethylsiloxane tube is used for effective capturin

293 The polydimethylsiloxane vitrimer thin film maintains excell

294 anoscale-thick, perfluorinated compound-free polydimethylsiloxane vitrimers that are self-healing due

295 y is effectively suppressed by interposing a polydimethylsiloxane wall between adjacent QCM electrode

296 tes the stretchability and transparency of a polydimethylsiloxane waveguide, while also serving as a

297 PtBA = poly(tert-butyl acrylate), and PDMS = polydimethylsiloxane) were created by the living crystal

298 ng of low-molecular-weight polystyrene-block-polydimethylsiloxane with a lattice spacing of 11 nm on

299 ided by this principle, we develop printable polydimethylsiloxane-zirconium oxide composites that ach

300 Beyond planar coatings, the rheology-tunable polydimethylsiloxane-zirconium oxide ink enables direct