ライフサイエンスコーパス: tin

1 e relative standard deviation was 4.5% for a tin solution of 0.50microgL(-1).

2 This effect arises from a tin oxide surface layer that encapsulates small Pd-rich

3 n of 1 with ethyl diazoacetate resulted in a tin-substituted ketene complex [Cp*(IXy)(H)2 RuSn(OC2 H5

4 r 100-fold enhancement after deposition of a tin oxide layer of appropriate thickness (~310 nm).

5 his study, we report the identification of a tin(IV) oxochloride-derived cluster that binds an evolut

6 -2,5-dione, and caprolactone), which under a tin-mediated ring-opening polymerization (ROP), generate

7 went dual-energy CT (90 kV and 150 kV with a tin filter) and 3-T magnetic resonance (MR) imaging.

8 erphase by treating the lithium anode with a tin-containing electrolyte.

9 include a bislactone and strong Lewis acid (tin ethylhexanoate).

10 and current collector by thermally alloying tin and copper at their interface.

11 sordered monolayers consisting of alkyls and tin oxide.

12 od for preconcetration of trace antimony and tin in beverage samples.

13 Vanadium, nickel, cadmium, and tin were increased in prevalent patients.

14 and the smelting of lead, zinc, copper, and tin sulfides are sources of indium to the atmosphere in

15 Both germanium and tin compounds undergo [2+2] cycloaddition with diphenylk

16 erful discharges, some grains are heated and tin diffuses in the large silicon crystals.

17 pical silane, lithium aluminium hydride, and tin-based conditions for these reductions.

18 likely phases as alloys of lead, indium, and tin.

19 lendering and folding process of lithium and tin foils, and spontaneous alloying reactions.

20 tation to determine the role of silicate and tin (two experimental nonphosphate corrosion inhibitors)

21 Alloy-type anodes such as silicon and tin are gaining popularity in rechargeable Li-ion batter

22 emission spectroscopy shows that silicon and tin melt almost simultaneously.

23 gle-crystalline aluminum, copper, silver and tin nanowires.

24 electrocatalysts (i.e., copper, silver, and tin).

25 port the application of a high-surface-area, tin-doped indium oxide electrode surface-derivatized wit

26 t of lead with nontoxic alternatives such as tin has been demonstrated in bulk films, but not in spat

27 ess was conducted under CO-CO(2) atmosphere, tin and iron were efficiently separated during magnetic

28 gradation pathways of Cs-, MA-, and FA-based tin(II) halides and show that degradation leads to highl

29 mation than the thinner and denser biofilms (tin and groundwater biofilms).

30 sed on the elastic moduli of these biofilms, tin biofilms and groundwater biofilms were the stiffest,

31 working as an ideal "glue" robustly bridging tin and copper to survive harsh cycling conditions in so

32 Inhibition of HO-1 by tin protoporphyrin (SnPP) or siRNA downregulated Pax3/7-

33 arting from 17e; Scheme 9 ), both derived by tin-lithium exchange, and 24 (starting from 20; Scheme 9

34 compounds could be further functionalized by tin-lithium exchange followed by alkylation of the newly

35 The annulation was promoted by tin(IV) chloride, and the products were obtained as sing

36 n of the known Ni-centered and Ni(CO)-capped tin clusters [Ni@Sn9 Ni(CO)](3-) .

37 able performance is also achieved for cesium tin iodide solar cells with en loading, demonstrating th

38 e use of the lead-free, all-inorganic cesium tin-germanium triiodide (CsSn(0.5)Ge(0.5)I(3)) solid-sol

39 With this approach, it is possible to change tin nucleation from a stochastic to a deterministic proc

40 activity profile mirroring that of classical tin radicals.

41 face plasmon resonances (LSPRs) in colloidal tin-doped indium oxide (Sn:In2O3, or ITO) nanocrystals.

42 Single-crystal tin selenide (SnSe), a record holder of high-performance

43 Here we calculate detailed tin opacity spectra using the Los Alamos atomic physics

44 ilized the metal particles on antimony-doped tin oxide (ATO) in sustained lower Ir oxidation states (

45 Fluorine doped tin oxide (FTO) electrochemical immunosensor has been de

46 ne/gold nanoparticles (AuNPs)/fluorine doped tin oxide (FTO) glass electrode.

47 alladium (ZnO/Pt-Pd) modified fluorine doped tin oxide (FTO) glass plate was fabricated for detection

48 (rGO) nanocomposite modified fluorine doped tin oxide (FTO).

49 cell, utilizes a transparent fluorine doped tin oxide electrode to sense O2.

50 rys zeo were deposited on the Fluorine doped tin oxide glass electrode (FTO) by drop-casting method f

51 tion of pyrene pyrrole onto a fluorine-doped tin oxide (FTO) electrode allowed the targeted orientati

52 cessfully electrodeposited on fluorine-doped tin oxide (FTO) substrate using [BMIM][Ac] ionic liquid

53 Glass/fluorine-doped tin oxide (FTO) substrates have been used to electrodepo

54 on a glass slide covered with fluorine-doped tin oxide (FTO), which acts as a biosensor.

55 Illumination of the resulting fluorine-doped tin oxide (FTO)|SnO2/TiO2|-[Ru(a) (II)-Ru(b) (II)-OH2](4

56 hydroxide electrodeposited on fluorine-doped tin oxide coated glass slide (CdS/Ni(OH)(2)/FTO).

57 g formate dehydrogenase, on a fluorine-doped tin oxide glass electrode modified with Cp*Rh(2,2'-bipyr

58 Spiro-OMeTAD/Au, where FTO is fluorine-doped tin oxide, sTiO2 indicates solid-TiO2, and mpTiO2 is mes

59 solar cells grown directly on fluorine-doped tin oxide-coated substrates without using any hole-block

60 at 300 to 773 kelvin, realized in hole-doped tin selenide (SnSe) crystals.

61 is produced in a hot and dense laser-driven tin plasma.

62 be required for the development of economic tin deposits, are marked by zircon Eu/Eu* values of ca.

63 , the process can be directed towards either tin- or iodo-substituted product formation, giving compl

64 and this groundwater was amended with either tin or silicate corrosion inhibitor (0.5 mg/L as Sn and

65 onductors, but also for 'opaque' electrodes, tin-doped indium oxide and silver nano-films.

66 get the utmost out of the valuable elements (tin and iron) from the tailings, and a gradient-recovery

67 We find tin and tungsten use in automobiles to be 3-5 times high

68 The synthesis of the first tin-bridged bis(benzene) vanadium and trovacene sandwich

69 yte interphase composed of lithium fluoride, tin, and the tin-lithium alloy is formed, which not only

70 cy is one of the highest reported so far for tin halide perovskite systems, highlighting potential ap

71 mprehensive and clean utilization method for tin-, iron-bearing tailings produced no secondary hazard

72 d to 21 +/- 3.2 and 11 +/- 2.4 mum/month for tin biofilms and groundwater biofilms, respectively.

73 Here we identify a family of nucleants for tin, prove their effectiveness using a novel droplet sol

74 lead (Pb)-free inverted planar formamidinium tin triiodide (FASnI3 ) perovskite solar cells (PVSCs) a

75 The locally formed tin-copper alloys are electron-conductive and meanwhile

76 pia (Oreochromis spp.) sampled from a former tin mining pool, concrete tank and earthen pond in Jeleb

77 red tilapia can be ranked as follows: former tin mining pool > concrete tank > earthen pond.

78 as a superior dopant-free HTL for lead-free tin-based perovskite solar cells.

79 Here, we report lead-free tin-based solar cells with greatly enhanced performance

80 by the lack of high-efficiency, low-band gap tin-lead (Sn-Pb) mixed-perovskite solar cells (PSCs).

81 of silylene 1 and for its heavier germanium, tin, and lead homologues uniformly electronic structures

82 le and triple bonds with silicon, germanium, tin and lead had considerable impact on modern ideas of

83 rinuclear omplex is reactive toward TEMPO-H, tin hydrides, thiols, and dihydrogen.

84 l structure of mixed-cation and mixed-halide tin(II) halide perovskites as well as their degradation

85 his issue, here we report a new hierarchical tin/carbon composite in which some of the nanosized Sn p

86 Here six crystalline high-germanium or high-tin zeolite-type sulfides and selenides with four differ

87 e previously reported high conductivities in tin(II) halide perovskites.

88 ver that the charge collection efficiency in tin-based PSCs is limited by a short diffusion length of

89 n the silicate biofilms compared to those in tin and groundwater biofilms.

90 an electrochemical sensor via incorporating tin sulfide (SnS) and titanium dioxide (TiO(2)) on graph

91 Indium tin oxide (ITO) is one of the most widely used transpare

92 Indium tin oxide (ITO) nanoparticles were spray-coated on trans

93 rstand thin film delamination from an indium tin oxide (ITO) current collector under cyclic load.

94 gold nanoparticle (AuNP) arrays on an indium tin oxide (ITO) electrode using efficient and low-cost m

95 ide (Fe3O4) nanodots fabricated on an indium tin oxide (ITO) substrate via a block copolymer template

96 An indium tin oxide (ITO) transparent electrical heater is pattern

97 We demonstrate Mn CSV using an indium tin oxide (ITO) working electrode both bare and coated w

98 0) cm(-2) at the interface between an indium tin oxide anode and the common small molecule organic se

99 within the 5-100 nm scale pores of an indium tin oxide electrode.

100 e composed of a gold electrode and an indium tin oxide film with micrometer separation with a double-

101 polymerizing polyaniline (PANI) on an indium tin oxide screen-printed electrode (ITO SPE), we achieve

102 a polytetrafluoroethylene film on an indium tin oxide substrate plus an aluminium electrode.

103 ubes that have been immobilised on an indium tin oxide surface functionalised with osmium-based compo

104 ovskite solar-cell devices made on an indium tin oxide/poly(ethylene terephthalate) substrate via a l

105 consists of nanostructured silver and indium tin oxide (ITO) electrodes which are separated by 5 nm t

106 Gold and indium tin oxide electrodes were characterized with respect to

107 ectric nanowires, made of silicon and indium tin oxide, is reversibly structurally deformed under the

108 n other transparent materials such as indium tin oxide ( approximately 80%) and ultrathin metals ( ap

109 ent conducting oxides (TCOs), such as indium tin oxide and zinc oxide, play an important role as elec

110 z, and to conductor supports, such as indium tin oxide, aluminum, highly ordered pyrolytic graphite,

111 omposite thin film sandwiched between indium tin oxide and indium-gallium eutectic alloy exhibit a lo

112 ensitized photocathodes on NiO-coated indium tin oxide (ITO) electrodes and their H2-generating abili

113 ized cerium oxide nanoparticle coated indium tin oxide as a working electrode to observe the enhanced

114 stituted polythiophene polymer coated indium tin oxide electrode was used for the determination of IL

115 of mesoporous, transparent conducting indium tin oxide nanoparticle (nanoITO) electrodes to prepare b

116 d a H(2)ase immobilized on conductive indium tin oxide (ITO) as an electron relay.

117 rs to enolate acceptors on conductive indium tin oxide surfaces.

118 thiophene polymer modified disposable indium tin oxide electrode.

119 Heavily n-doped indium tin oxide (ITO) is used as the semiconductor in the MOS

120 This control is achieved by embedding indium tin oxide (ITO) into these cavities.

121 Epitaxial indium tin oxide films have been grown on both LaAlO3 and yttri

122 of PVDF nanowires-PDMS composite film/indium tin oxide (ITO) electrode/polarized PVDF film/ITO electr

123 of their counterparts on rigid glass/indium tin oxide substrates, reaching a power conversion effici

124 r cells have a p-i-n structure (glass/indium tin oxide/NiO(x)/perovskite/ZnO/Al), in which the ZnO la

125 s indicate that electrolyte gating in indium tin oxide triggers a pure electronic process (electron d

126 nductive oxides includes the material indium tin oxide (ITO) and has become a widely used material of

127 ng P3HT and even inorganic materials, indium tin oxide and gold, showed similar electrical potential

128 ovalently immobilized on a mesoporous indium tin oxide (mesoITO) scaffold for efficient alcohol oxida

129 e (GOx) was immobilized on a modified indium tin oxide (ITO) coated polyethylene terephthalate (PET)

130 Chemically modified indium tin oxide nanoparticle modified electrodes were used to

131 sembled on a polyethylene naphthalate-indium tin oxide flexible substrate with a PCE of 3.12% is demo

132 he conducted experiments with a 10 nm indium tin oxide film, having plasmonic resonance in the 1500 n

133 nsparent conductive electrode film of indium tin oxide (ITO) coated on the interface of total interna

134 ted by a 20-nm-thick metallic film of indium tin oxide (ITO), a plasmonic material serving as a low-c

135 The working electrode was composed of indium tin oxide (ITO); the quasi-reference and auxiliary elect

136 ub-picosecond optical nonlinearity of indium tin oxide nanorod arrays (ITO-NRAs) following intraband,

137 ectrode based on transparent layer of indium tin oxide was electrochemically modified with a layer of

138 d enzyme coated NPs were deposited on indium tin oxide (ITO) coated flexible polyethylene terephthala

139 label-free biosensing device based on indium tin oxide (ITO) overlaid section of a multimode optical

140 ited poly(3-hexylthiophene) (P3HT) on indium tin oxide (ITO) substrate.

141 to the clustering of BCP molecules on indium tin oxide (ITO) surfaces, which is a significant problem

142 ismuth telluride thin films, grown on indium tin oxide.

143 Here, we show that an inverse opal-indium tin oxide electrode hosts a large population of current-

144 An optically transparent patterned indium tin oxide (ITO) three-electrode sensor integrated with a

145 es onto a gold-nanoparticle-patterned indium tin oxide electrode.

146 graphene electrodes has out-performed indium tin oxide in power conversion efficiency (PCE).

147 supported Ru(bda) catalyst on porous indium tin oxide (ITO) electrode.

148 control diode fabricated on the rigid indium tin oxide/glass substrate.

149 iency solar cells, on semitransparent indium tin oxide (ITO) and titanium dioxide (TiO2) electrodes.

150 ent is demonstrated by various shaped indium tin oxide (ITO) patterns.

151 tu-grown over a conductive substrate (indium tin oxide) using a low-temperature template-based co-pre

152 We report that indium tin oxide can acquire an ultrafast and large intensity-d

153 ieve this first requires showing that indium tin oxide surfaces can be used for SMLM, then that these

154 electrophoretically deposited on the indium tin oxide coated glass substrate at a low DC potential.T

155 ng a time-varying subwavelength-thick indium tin oxide (ITO) film in its ENZ spectral range.

156 ssy Mode Resonances generated by thin indium tin oxide (ITO) films fabricated onto the planar region

157 Thin indium tin oxide (ITO) films have been used as a medium to inve

158 e a prominent low-cost alternative to indium tin oxide (ITO).

159 considered a promising alternative to indium tin oxide as transparent conductors.

160 context, we used optical transparent indium tin oxide (ITO) as electrode material.

161 ymeric films on optically transparent indium tin oxide (ITO) electrodes.

162 n external potential to a transparent indium tin oxide-coated electrode (the substrate), which enable

163 rast, P450 BM3 adsorbed on unmodified indium tin oxide electrodes revealed 36% activity by electrode

164 Whereas indium tin oxide (ITO) is a well-known transparent conductive o

165 ganic solar cells is proposed without indium tin oxide (ITO) and poly(3,4-ethylenedioxythiophene):pol

166 electrophoretically deposited onto an indium-tin-oxide glass substrate and used for immobilization of

167 ctrode is shown to perform as well as indium-tin oxide glass.

168 d copper oxide, as well as conducting indium-tin oxide and copper metal.

169 Conductive indium-tin-oxide (ITO, In(2)O(3):Sn) mesoporous films were func

170 For this purpose, we integrate indium-tin-oxide (ITO) as a tunable electro-optical material in

171 of single redox events on a modified indium-tin oxide (ITO) electrode.

172 Here, a sub-10 nm indium-tin-oxide transistor with an ultrashort vertical channel

173 ce > 70%) that are rivalling those of indium-tin oxide.

174 and disposable immunosensor based on indium-tin oxide (ITO) sheets modified with gold nanoparticles

175 rolactone (PCL) electrospun fibers on indium-tin-oxide (ITO) glass provide a sufficient surface to re

176 tabilized Au nanoparticles (NPs) onto indium-tin-oxide-coated glass (glass/ITO) electrodes as studied

177 We present indium-tin-oxide-based photocurrent measurements that reveal a

178 Administration of HO-1 inhibitor tin protoporphyrin IX dichloride in infected BALB/c mice

179 e thermoelectric properties of all-inorganic tin based perovskites with enhanced air stability.

180 Organic-inorganic tin(II) halide perovskites have emerged as promising alt

181 ding 0.03 molar percent of cadmium ions into tin-perovskite precursors reduce the background free hol

182 biquitous transparent conducting material is tin-doped indium oxide (ITO), a wide-gap oxide whose con

183 'nanocrystal-in-glass' composites (that is, tin-doped indium oxide (ITO) nanocrystals embedded in Nb

184 h three nonsilyl substituents, tri-isopropyl tin in this case.

185 ster core of [Ge18Pd3] and six tri-isopropyl tin substituents.

186 The group-IV tin has been hypothesized to possess intriguing electron

187 with an ultra-low dose CT (32-MDCT, 130 kV, tin filter and iterative reconstruction).

188 n quantum efficiency of nanoscale 2D layered tin iodide perovskites through fine-tuning the electroni

189 Here we present three new layered tin iodide perovskites templated by chiral (R/S-)methylb

190 paration during one-pot synthesis of layered tin chalcogenides spontaneously creates core-shell struc

191 rtion compared to any other reported layered tin iodide perovskite.

192 chromium, copper, mercury, molybdenum, lead, tin, and vanadium--in relation to young-onset breast can

193 Lead-tin gradient alloying allows the formation of a graded e

194 Here, highly stable self-assembled lead-tin perovskite heterostructures formed between low-bandg

195 ance (for example, solar cells based on lead-tin-gradient structures with an average efficiency of 18

196 able emission from 850 to 950 nm, using lead-tin (Pb-Sn) halide perovskite as emitters are demonstrat

197 can be used to continuously circulate liquid tin at temperatures of around 1,473-1,673 kelvin.

198 ity between the metallic lithium and lithium tin alloy as mixed electronic and ionic conducting netwo

199 We demonstrate that a lithium/lithium tin alloy foil electrode sustains stable lithium strippi

200 ted, three-dimensional lithium metal/lithium tin alloy nanocomposite foil realized by a simple calend

201 Stille coupling followed by copper-mediated tin/chlorine exchange.

202 We detect the presence of metallic tin among the degradation products, which we suggest cou

203 , by encapsulating nanoparticles of metallic tin in mechanically robust graphene tubes, we show tin a

204 The metallic tin (Sn) anode is a promising candidate for next-generat

205 synthesis of two closely related metastable tin vanadium selenides via near-diffusionless reactions

206 ollow" ethylenediammonium and methylammonium tin iodide ({en}MASnI3) perovskite as absorbers.

207 ive study of a series of lead-free and mixed tin and germanium halide perovskite materials.

208 (EUV) for the chip production, where molten tin is used to generate the EUV radiation.

209 rough effective-medium theory, linear muffin-tin orbital theory, and the d-band model, we rationalize

210 All the new tin hydrides remain metallic over their predicted range

211 luding copper, manganese, magnesium, nickel, tin, niobium, light rare earth elements (LREEs; lanthanu

212 me change of a high-specific-capacity nickel-tin nanocomposite during operation as a Li-ion battery a

213 The nickel-tin anode is supported by an electrochemically inactive

214 We have found that the addition of tin nanoparticles to a silicon-based anode provides dram

215 We show that the addition of tin to palladium catalysts coupled with an appropriate h

216 Even a minor addition of tin, as small as approximately 2% by weight, results in

217 eloped for determination of trace amounts of tin in canned beverage samples, which is widely used in

218 We thus reveal the doubly magic behavior of tin and the origins of the EUV light.

219 The model estimates the upper bound of tin, tungsten, tantalum, and gold use within ICT product

220 mass through heavy doping, as in the case of tin-doped indium oxide (ITO).

221 as focused attention on the supply chains of tin, tungsten, tantalum, and gold (3TG), specifically th

222 hway of producing sizable 2D crystallites of tin is based on deintercalation of bulk compounds with s

223 ][Tf2N] as ionic liquid for the detection of tin employing electrothermal atomic absorption spectrome

224 The procedure allowed the determination of tin with limits of detection and quantification of 3.4 a

225 red nanoparticles showing the dissolution of tin and platinum species during electrocatalysis.

226 However, the efficiency of tin-based perovskite solar cells is still low and they e

227 The liquid-phase exfoliation of tin(II) sulfide to produce SnS nanosheets in N-methyl-2-

228 oating to sequentially deposit thin films of tin oxide, a triple-cation perovskite and spiro-OMeTAD,

229 e deposited a high refractive index layer of tin oxide on top of the grating to red-shift the front s

230 thium binary alloys during the lithiation of tin-tin oxide core-shell nanoparticles.

231 lled with great precision, the nucleation of tin in solder joints is currently left to chance.

232 eved by self-doping through the oxidation of tin (IotaIota) to tin (IotaV) in a thin surface-layer th

233 Unfortunately, the performance of tin-based systems is markedly inferior to those featurin

234 transformation from alpha to beta phases of tin (Sn) nanocrystals is investigated in nanocrystals wi

235 The optical and light emission properties of tin and lead halide perovskites are remarkable because o

236 ement and the photoluminescent properties of tin iodide perovskite nanodisks.

237 method was applied for the quantification of tin in several food samples.

238 Dynamical stability and superconductivity of tin hydrides are systematically investigated.

239 o the point that "flight from the tyranny of tin" in radical processes was considered for a long time

240 he hydrogen donor, thus obviating the use of tin-based reagents.

241 Perovskites based on tin, which is slightly smaller than lead, show the oppos

242 for a photocatalyst, a radical initiator, or tin or silicon hydrides.

243 ation of a series of low-dimensional organic tin bromide perovskites with 1D and 0D structures is rep

244 Reduced graphene oxide/tin dioxide (RGO/SnO(2)) binary nanocomposite for aceton

245 We explored how palladium-tin alloys form mixed-composition phases with metals wit

246 PE HTL material in low-cost high-performance tin-based perovskite solar cells.

247 The best-performing tin iodide perovskite cells employing the novel mixed-ca

248 ed on boron, silicon, germanium, phosphorus, tin, and metal di-chalcogenides.

249 , extrinsically doped p-type polycrystalline tin selenides.

250 The family of solution-processed tin-based perovskites is demonstrated as a new and super

251 c effect of storing lithium via a reversible tin-lithium alloy formation and enabling lithium plating

252 he presence of different species in the same tin, although this is forbidden by EU law.

253 , molybdenum (Mo), lead (Pb), antimony (Sb), tin (Sn), and thallium (Tl) were measured by inductively

254 er, iron, lead, manganese, nickel, selenium, tin, and zinc, were present in e-cigarette samples in th

255 nsitizing a degenerate n-type semiconductor (tin-doped indium oxide; ITO) is reported.

256 tovoltaics, especially for the air-sensitive tin-based perovskite systems.

257 structure, in which individual seesaw-shaped tin (II) bromide anions (SnBr4(2-) ) are co-crystallized

258 mechanically robust graphene tubes, we show tin anodes with high volumetric and gravimetric capaciti

259 Silicon (Si), tin (Sn), and germanium (Ge) alloys have attracted resea

260 Silicon, tin, and graphite were successfully prelithiated with th

261 of materials, including aluminium, silicon, tin and so on.

262 The synthesis feasibility of silicon-tin nanocrystals by discharges in liquid nitrogen is stu

263 ntercalation of bulk compounds with suitable tin frameworks.

264 etic concentrates containing 64.53 wt.% TFe, tin-rich dusts containg 52.4 wt.% TSn and NaNO(3)/C-PCMs

265 , cesium, lead, mercury, platinum, thallium, tin, and uranium), and their associations with salivary

266 Here we show an unusual phenomenon that tin (Sn) microparticles with both poor size distribution

267 riations in zircon Hf and U/Yb reaffirm that tin belt magmas contain greater crustal contributions th

268 The tin(II) hydride [Ar((i)Pr6)Sn(mu-H)]2(Ar((i)Pr6) = C6H3-

269 The tin-tin triple bond in the distannyne Ar(iPr4)SnSnAr(iPr

270 entered into non-magnetic materials; (2) The tin-enriched non-magnetic materials were briquetted with

271 d that the increased conductivity allows the tin oxide conversion and alloying reactions to both be r

272 e composed of lithium fluoride, tin, and the tin-lithium alloy is formed, which not only ensures fast

273 employed as the additional Lewis base in the tin halide solution to form SnY2 -TMA complexes (Y = I(-

274 with diphenylketene, whereas reaction of the tin derivative with tris(pentafluorophenyl)borane provid

275 der joints to control the orientation of the tin nucleation event.

276 occurs at the quantum critical point of the tin-doped metal.

277 On the tin (Sn) surface, we identify intra-Brillouin zone Weyl

278 rsors, we developed a structure in which the tin nanoparticles are segregated at the interface betwee

279 ges and a waveguide like behavior within the tin oxide film.

280 ith CaCl(2) and anthracite and roasted, then tin-rich dusts were collected during the chloridizing ro

281 Among these, tin-containing zeolites have demonstrated superior catal

282 ane spontaneous polarization in atomic-thick tin telluride (SnTe), down to a 1-unit cell (UC) limit.

283 ished for the nanoscale thienylethylammonium tin iodide perovskite (TEA(2)SnI(4)).

284 g through the oxidation of tin (IotaIota) to tin (IotaV) in a thin surface-layer that transfers charg

285 vere drawback due to the employment of toxic tin hydrides to the point that "flight from the tyranny

286 In this work, we use tin oxide, SnO2, as a representative anode material to e

287 However, commonly used tin-based narrow-bandgap perovskites have shorter carrie

288 Using tin nanoarrays electrochemically deposited on copper sub

289 Th3/(+) We observed that HO inhibition using tin protoporphyrin IX (SnPP) decreased heme-iron recycli

290 in China, which contains plenty of valuable tin, iron elements and is not utilized effectively.

291 set from the paired Cu-Au (copper) and Sn-W (tin) magmatic belts in Myanmar.

292 action time and the chemometric response was tin recovery.

293 In contrast, when tin (Sn) is added to CeO2 , the single-atom Pt catalyst

294 estigate the variants of this compound where tin is substituted by germanium or silicon and find that

295 e delta(18)O (5.2-5.5 per thousand), whereas tin belt zircons have low epsilonHf (-7 to -13) and heav

296 mation was between 60 and 75% complete while tin-oxygen bond cleavage was much less advanced, between

297 ron was enriched in magnetic materials while tin entered into non-magnetic materials; (2) The tin-enr

298 le bimolecular recombination associated with tin and the reduced trap density with SnF2 treatment, th

299 The use of scanners with tin filters, high-resolution detectors, and iterative re

300 Copper zinc tin sulfide (CZTS) is a promising material for harvestin