ライフサイエンスコーパス: abrasive

1 n dioxide using ceria slurry and ceria fixed abrasive.

2 99-279 nm particles, and attributed to ceria abrasive.

3 a conventional straight-sided bur or with an abrasive air jet laden with glass particles.

4 und to a thickness of 1 mm with 240-grit SiC abrasive, and polished through 600-grit on the surface t

5 lization is achieved in two ways: first, via abrasive attachment of multiwall carbon nanotubes or gra

6 Brush cytology data suggest that a more abrasive balloon may improve balloon cytology sensitivit

7 n no hydraulic debridements, but in 11 of 14 abrasive blebs, especially in areas showing leakage late

8 Higher current densities and non-abrasive brushes produce rough, particle-rich samples.

9 Radiopaque aluminum oxide particles from abrasive cautery-tip cleaning pads can be dislodged and

10 he lower wear rate of mineral from the fixed abrasive, compared to the more environmentally mobile mi

11 Abrasive debridement is more commonly associated with ab

12 iodontists need both effective and minimally abrasive debridement techniques.

13 For abrasive debridement, RPE were removed with a silicone-t

14 ek timepoint, 1 of 17 hydraulic and 10 of 12 abrasive debridements had foci of delayed or absent chor

15 In 1 of 13 hydraulic and 12 of 14 abrasive debridements, areas of late dye leakage had no

16 Equidae) is thought to be an adaptation for abrasive diets associated with the spread of grasslands.

17 tals in M. truncatula leaves act as physical abrasives during feeding.

18 e advantage of using silica nanoparticles as abrasives for tooth polishing.

19 implant surface indicates remaining blasting abrasive from preoperative surface treatment of the nano

20 Less abrasive glycine powder, however, demonstrated non-criti

21 these horses were interpreted to have fed on abrasive grasses because of their high-crowned teeth.

22 that were induced by grinding with 1 micron abrasive grit.

23 Root surfaces experience continuous abrasive instrumentation during lifelong periodontal mai

24 ee characteristics: patient psychopathology, abrasive interpersonal styles, and multiple physical sym

25 emotherapy, the patient was noted to have an abrasive laceration between the fourth and fifth metacar

26 Firstly, fixed-abrasive lapping is used to machine the MCT wafers, and

27 Ceria nanoparticles are one of the key abrasive materials for chemical-mechanical planarization

28 um corneum, which must be overcome either by abrasive methods or by hydration.

29 oron nitride (c-BN), which are the superhard abrasives of choice for cutting and shaping hard metals

30 The cecum was identified and scored using an abrasive pad until serosal bleeding was noted on the ant

31 ation with curettage, microdermabrasion with abrasive pads, microneedling with dermarollers, ablative

32 aneously be generated by scanning a piece of abrasive paper in only one direction.

33 elain discs were polished with a P4000-grade abrasive paper, and half were centrally indented at 9.8

34 e results support the "bonded" nature of the abrasive particles in fixed abrasive polishing and are r

35 elected to cope with important ingestions of abrasive particles in the context of intensified volcani

36 Unit operations and especially abrasive peeling might need further optimisation to make

37 The fixed abrasive polish produced 94% less CeO2 emissions per SiO

38 d" nature of the abrasive particles in fixed abrasive polishing and are relevant to sustainability st

39 t may be accomplished by air polishing using abrasive powders.

40 tion of ceria in the effluent from the fixed abrasive process is due to the lower wear rate of minera

41 dow on the pathways through which hostile or abrasive relationships affect physiological functioning

42 A simple abrasive technique for obtaining cytological material fo

43 Abrasive Waterjet Machining (AWM) and Electrical Dischar

44 This study showed that the resistance to abrasive wear of a dental composite could be improved by

45 When present in fuel oil, cat fines cause abrasive wear of engine parts and may ultimately lead to

46 2 = 0.91) between the degree of cure and the abrasive wear of the hybrid composites.