ライフサイエンスコーパス: fabricate

1 r-stable, non-toxic, and extremely simple to fabricate.

2 alled carbon nanotube (SWCNT) films are also fabricated.

3 ocyanin encapsulation and stabilization were fabricated.

4 f human serum albumin (HSA) are designed and fabricated.

5 olecularly imprinted sensor was successfully fabricated.

6 es (VACNT) and a conjugated polymer (CP) was fabricated.

7 tal fiber field-effect transistors were also fabricated.

8 nctional 3D printing approach is employed to fabricate 3D tactile sensors under ambient conditions co

9 We fabricate a FM alloy with zero Nernst coefficient to mit

10 We fabricate a freestanding and flexible hydrogel based pla

11 carbon nanotubes (SWCNT) was synthesized to fabricate a highly sensitive electrochemical biosensor f

12 Here, we fabricate a multiferroic tunnel junction based on ferrom

13 We fabricate a quasi-continuous-wave (QCW) diode-pumped Nd:

14 lament (graphene/PLA) has been 3D printed to fabricate a range of 3D disc electrode (3DE) configurati

15 ary antibody onto AgNPs-rGO modified-SPEs to fabricate a sandwich-type electrochemical immunosensor.

16 Here, Li and co-workers fabricate a stable metal-organic framework functionalize

17 using a simple commercial inkjet printer to fabricate a thin-film paper-based biophotovoltaic cell c

18 presence of a tissue paper in autoclave, we fabricated a flexible porous polymer/paper hybrid membra

19 Here, we introduce a facile route for fabricating a new class of instrumented cardiac microphy

20 and bi-layer graphene could be successfully fabricated after one- and two-cycle ALE of the trilayer

21 ity polarization in an in-house designed and fabricated air-silica photonic crystal fiber (PCF).

22 c and potentiostatic pulses has been used to fabricate an electrocatalytically active Ni/Ni(OH)2/grap

23 affinity and conformation change was used to fabricate an electrochemical aptasensor via self-assembl

24 d to modify glassy carbon electrode (GCE) to fabricate an electrochemical sensor for the selective de

25 electrochemical aptasensor was developed by fabricating an aptamer-cell-aptamer sandwich architectur

26 Then, we fabricated and characterized a deep-ultraviolet light-em

27 ctional monomer, gold nanoroots (AuNRs) were fabricated and characterized with TEM, SEM and XRD.

28 oheater-based structure, have been designed, fabricated and characterized.

29 stor (HEMT) with nano antenna structures was fabricated and demonstrated to be able to work up to 200

30 nd sub-micrometer wall thicknesses have been fabricated and have been shown to sustain optical resona

31 ent electrode with light-emitting diodes was fabricated and its feasibility for optical biofilm thick

32 or (WAND) with cylindrical symmetry has been fabricated and non-surgically inserted into a rodent low

33 h quality AlN template: a deep UV-LED device fabricated and showed a strong single sharp electrolumin

34 We fabricated and tested a proof-of-concept NanoThermoMecha

35 The device has been designed, fabricated and tested for the implementation of DNA ampl

36 e3/SiO2/Cu film structures were designed and fabricated and the optical properties investigated in th

37 nanotubes (MWCNTs), and pyrogallol (PG) was fabricated and utilized for the sensitive determination

38 s has great potential, but the complexity of fabricating and operating devices has limited its use.

39 he vertical memory is Si compatible, easy to fabricate, and in principle can be scaled down to a sing

40 sitivity at lambda = 10.6 mum, was designed, fabricated, and characterized.

41 remarkably facile and effective approach to fabricating anisotropic transparent films directly from

42 pedance spectroscopy studies showed that the fabricated aptasensor can specifically identify CT26 cel

43 orimetric and water wetting properties of as-fabricated arrays were found to be highly sensitive towa

44 ofibrous webs (zein-THY/gamma-CD-IC-NF) were fabricated as a food packaging material.

45 Asymmetric rose-shaped gold particles were fabricated as a proof of concept experiment.

46 The sensor was designed and fabricated as a three electrode system with Nafion as a

47 rtical standing array on a glass surface was fabricated as plasmonic substrates, resulting in dramati

48 uniformly dispersed into epoxy resins and be fabricated as transparent CDots/epoxy composites for mul

49 The biocompatible polymer microneedle was fabricated at 60 degrees C.

50 sults show that the lasing wavelength of the fabricated BIC cavities, each made of an array of cylind

51 In this research work, we fabricated biodegradable bilayer MN arrays containing na

52 sed (PC) collagen technique is often used to fabricate bioengineered constructs, PC collagen gels are

53 in other polyelectrolyte hydrogel systems to fabricate biomimetic cellular scaffolds for the repair o

54 The fabricated biosensor exhibited excellent sensitivity, ac

55 The resulting flexible membrane is used to fabricate breath-powered write-once-read-many-times-type

56 Stainless steel electrodes were fabricated by 3D printing, and the surface was electropl

57 The CNT enabled smart fabrics, fabricated by a cost-effective and scalable method, are

58 ased on coordination polymer frameworks were fabricated by a facile layer-by-layer method.

59 The thin film is fabricated by a low-cost and scalable spin coating proce

60 metallic-halide-perovskite-based devices are fabricated by a manufacturing process, which is demonstr

61 tride nanolayer and bulk carbon nitride, was fabricated by a one-step approach.

62 tion of three-dimensional nanoporous metals, fabricated by a top-down dealloying approach, has not be

63 res with Bouligand-type carbon nanotubes are fabricated by an electrically assisted 3D-printing metho

64 last cells toward pristine titania nanotubes fabricated by anodic oxidation.

65 The regenerable membrane was fabricated by assembling multiple polyethylenimine (PEI)

66 Three different GNRs were fabricated by bottom-up synthesis in the liquid phase, w

67 The probes were fabricated by coating an unclad core of the fiber with s

68 ort through ultimately narrow slits that are fabricated by effectively removing a single atomic plane

69 e; and a micro quasi-reference electrode was fabricated by electroplating CNT thread with Ag and then

70 The nanostructured arrays were fabricated by focused ion beam milling and their electro

71 Fe foams fabricated by freeze-casting and sintering were electroc

72 The sensor probe was fabricated by immobilizing CXCR2 on the gold nanoparticl

73 Finally, biosensor was fabricated by immobilizing GOx into PAA-rGO/VS-PANI/LuPc

74 Flexible chemiresistive sensors were then fabricated by inkjet-printing fine-featured silver IDEs

75 The micro-disk laser has been fabricated by means of a combination of a cost-effective

76 otected gold nanoparticles (Tyr-Au NPs) were fabricated by one-step reduction of Au(3+) ion using Tyr

77 hat the corresponding mutant GLI1 protein is fabricated by patient cells and becomes upregulated in r

78 The carbon chains are fabricated by polymerization of prochiral 1,3,5-tris(3-b

79 best efficiencies reported to date for PVSCs fabricated by room-temperature solution-processed techni

80 t the first paper microbial fuel cell (pMFC) fabricated by screen-printing biodegradable carbon-based

81 nt wall width (120 nm, 80 nm and 40 nm) were fabricated by specialized nano-sphere lithography techno

82 that compare favourably with control-devices fabricated by spin-casting that had an average efficienc

83 We present a SDSM fabricated by strategically patterning three wettable we

84 The MEMS inertial microswitch micro-fabricated by surface micromachining has been evaluated

85 The waveguide structure was fabricated by the complementary metal-oxide-semiconducto

86 heads inspired by Salvinia molesta leaf was fabricated by the Immersed surface accumulation three di

87 tion of the paper-based microfluidic devices fabricated by the proposed method, colorimetric urine as

88 sor for shrimp tropomyosin determination was fabricated by using graphitic carbon nitride (g-C3N4) an

89 length nanowires on a transparent substrate, fabricated by using low-cost nanoimprint lithography ove

90 mechanical stiffness; therefore they can be fabricated by using the strain engineering and a self-fo

91 We fabricate centimetre-scale material geometries including

92 Polyjet fabricated channels with a minimum size of 205 +/- 13 mu

93 We fabricate charge collection narrowing photodetectors bas

94 esis can be combined with Glaser coupling to fabricate covalent polymers via a cascade process.

95 3D printing has been intensively explored to fabricate customized structures of responsive materials

96 -off behavior based on these novel hosts are fabricated, demonstrating the suitability of this concep

97 sing micro-CT scan of dental impressions for fabricating dental restorations and to compare the dimen

98 The fabricated detector has an area of 0.7lambda x 0.7lambda

99 The fabricated DURA-Z coating retains antifouling property a

100 hed platform not only provides strategies to fabricate ECM-like interfaces for medical devices, but a

101 temperature solution process is developed to fabricate efficient, low-cost, and stable perovskite sol

102 epidermis of A. tequilana leaves, where the fabricated electrochemical sensor was inserted by using

103 The H2O2 response of the fabricated electrodes was linear from 2.5 x 10(-3) to 6.

104 compliant materials that can be utilized to fabricate electronic muscles and skins.

105 CA, EC and EPC of POx on CNTs were used to fabricate enzymatic electrodes for enzyme-based biosenso

106 The platform is capable of fabricating extremely complex conductive circuits, strai

107 By fabricating Fe2O3NPs/rGO/PEDOT modified FTO electrode fo

108 sented a facile and cost-effective method to fabricate flexible SERS substrate including the fabricat

109 t in releasing single crystal thin films and fabricating flexible electronics with these conventional

110 obust and low cost microfluidic platform was fabricated for achieving the mixing of proteins, crystal

111 n-based microsphere delivery system has been fabricated for controlled release of alendronate (AL).

112 uorine doped tin oxide (FTO) glass plate was fabricated for detection of consensus DNA sequence of De

113 A paper strip sensor has been fabricated for successful detection of S(2-) ion.

114 and simple electrochemical immunosensor was fabricated for the detection of carcinoembryonic antigen

115 ble perovskite distributed feedback laser is fabricated for the first time.

116 We fabricate free standing porous multiwalled carbon nanotu

117 Ash et al. deviate from standard designs and fabricate frequency tailorable phononic crystals with an

118 This interferometer is fabricated from a single-crystal silicon cantilever on a

119 stive and impedance properties of ZnO films, fabricated from bacteria-derived ZnS nanoparticles, exhi

120 Recently, porous solids fabricated from discrete organic cages have garnered muc

121 The valves are fabricated from electrically conductive, insulated, hydr

122 The sensor was fabricated from electrospun NBR rubber, embedded with po

123 Devices fabricated from films formed via radiative thermal annea

124 TEBVs fabricated from HGPS iSMCs and hCB-EPCs show reduced vas

125 We employ bi-phase emulsion droplets fabricated from immiscible hydrocarbon and fluorocarbon

126 from YZ was only slightly better than those fabricated from LD.

127 ical stimulation of a new electrode material fabricated from lithographically patterned glassy carbon

128 alcification and apoptosis relative to TEBVs fabricated from normal iSMCs or primary MSCs.

129 e polymer microneedle used in this study was fabricated from PVP and methacrylic acid, using the lith

130 e valving on integrated microfluidic devices fabricated from rigid materials is confined to expensive

131 The NW FETs were fabricated from SOI material using high-resolution e-bea

132 A p-n junction fabricated from the deposited Si film exhibits clear pho

133 with the rectangular-lattice PC Bragg laser fabricated from the same wafer and find that their perfo

134 able non-volatile programmable p-n junctions fabricated from the vertically stacked all-2D semiconduc

135 The simulated 10-y survival rate of crowns fabricated from YZ was only slightly better than those f

136 d with iron electrodes, we have successfully fabricated fully disintegrable and biocompatible polymer

137 , which we refer to as colloidal fusion, for fabricating functional patchy particles in a tunable and

138 eby improving the sensing performance of the fabricated G-Au modified electrode with stable and repro

139 led 3 x 10(6 87)Rb atoms to 3 muK in a micro-fabricated grating magneto-optical trap (GMOT), enabling

140 In this work, we have developed a method to fabricate high-performance MgO-barrier MTJs directly ont

141 ign (CAD)/computer-aided manufacturing (CAM)-fabricated high-strength ceramics-namely, alumina and zi

142 o discussed, and the technique's promise for fabricating high-performance nacre-inspired structural m

143 rate the versatility of the approach we have fabricated highly mineralized composites with microscopi

144 These results shed light on fabricating highly efficient perovskite solar cells via

145 trochemical sacrificial-template strategy to fabricate hollow Co3 O4 microtube arrays with hierarchic

146 ighly absorbing protein multilayers that are fabricated in a simple fashion.

147 ler aspect ratios (<0.2) and thereby, can be fabricated in a single lithography step over relatively

148 of a multilayered conveyor belt structure is fabricated in aluminium nitride (AlN) because of its out

149 Antimonide compounds are fabricated in membrane form to enable materials combinat

150 These electrodes can also be fabricated in miniaturized form, and thus used to produc

151 the dental ceramics, are increasingly being fabricated in monolithic form for a range of clinical ap

152 lated chitosan microspheres was successfully fabricated in this study.

153 ndolo[1,2-a]quinazolinones from the suitably fabricated indoles via C-N bond forming cyclization in 2

154 As a proof-of-concept, these materials were fabricated into thin films and their specific binding ab

155 ne patterned on wood surfaces can be readily fabricated into various high-performance devices, such a

156 versatile partial cation exchange method to fabricate lamellar Ag-CoSe2 nanobelts with controllable

157 he freeze-casting technique are reviewed for fabricating lamellar scaffolds by assembling different d

158 d graphene single crystals onto TEM grids to fabricate large-area and high-quality suspended graphene

159 rformance, which provides new directions for fabricating lasers with designed wavelengths.

160 approach of this work provides an effort to fabricated membranes with high water flux and enhanced s

161 The in-house fabricated microchips, electrophoretic protocols, and so

162 ane) (PDMS) is a commonly used elastomer for fabricating microfluidic devices, but it has previously

163 /min) was observed, indicating a strength in fabricating micromixers.

164 This paves the way to fabricating microscale devices for a variety of technolo

165 The fabricated microwire electrode is further applied to the

166 Using the fabricated microwire, GSH can be detected with the sensi

167 We fabricated miniaturized SAF microlens array as part of a

168 iblock copolymers is a promising strategy to fabricate mixed-matrix membranes.

169 molecules and creates new opportunities for fabricating more complex molecular devices that are orga

170 er describes a simple and rapid approach for fabricating multifunctional e-textiles by integrating co

171 The fabricated multilayer MoS2 phototransistors on a polyary

172 rystals are a promising material for easy-to-fabricate nanolasers, but suffer from high threshold pow

173 The fabricated nanoplexes were assessed for their size, char

174 this Technical Note, we describe a method to fabricate nanopore-supported Pt nanoparticle electrodes

175 Fabricating nanoscopic devices capable of manipulating a

176 The band gap emission of fabricated nanoshells, ranging from 15 to 30 nm in diame

177 elops a soft thermal nanoimprint process for fabricating nanostructure decorated substrates integrate

178 rticle segregation) an attractive method for fabricating nanostructured hybrid films with potential a

179 with a split ring resonator (SRR), which was fabricated on a DiClad 880 substrate with a thickness of

180 anar design with a small footprint, which is fabricated on a glass substrate and integrated with a mi

181 This system was easily fabricated on a nitrocellulose membrane using a wax-prin

182 sensor based on iron oxide (Fe3O4) nanodots fabricated on an indium tin oxide (ITO) substrate via a

183 Au NB film was fabricated on carbon electrodes working area using L(+)

184 ation data points, measured on immunosensors fabricated on different chips (reproducibility error) wa

185 haped into maps of truncated icosahedron and fabricated on flexible sheets and further folded either

186 Plastic ENODes are also fabricated on flexible substrates enabling the integrati

187 urized optical devices can be monolithically fabricated on light-emitting semiconductors by solely re

188 he DNA arrays are of tunable dimensions, and fabricated on optically transparent substrates that enab

189 r efficiency compared with terahertz sources fabricated on short-carrier-lifetime substrates.

190 High mobility graphene field-effect devices, fabricated on the complex-oxide heterostructure LaAlO3 /

191 ing between surface structures (i.e. pillars fabricated on the microchannel wall) in boiling of two f

192 Furthermore, because the layers are fabricated on top of silicon logic circuitry, our nanosy

193 nerated by thin indium tin oxide (ITO) films fabricated onto the planar region of d-shaped optical fi

194 d Au nanoring-ring electrodes microarray was fabricated over a glass substrate using focused ion beam

195 industrial emulsification and applicable to fabricating particulate drug carriers with desired size

196 V oc of subcells with optimized bandgaps and fabricate perovskite-perovskite tandem solar cells with

197 atomic force microscopy (12,13) with custom-fabricated picowatt-resolution calorimetric microdevices

198 By using novel, custom-fabricated, picowatt-resolution calorimetric scanning pr

199 d electrode technologies as the material for fabricating POC diagnostic systems.

200 The fabricated polarizing beamsplitter exhibits extinction r

201 ss with polymer solution phase separation to fabricate porous multimaterial fibers with complex inter

202 While many techniques have been developed to fabricate porous scaffolds, most of them rely on stochas

203 e employment of graphene to customize and/or fabricate printable based (bio)sensors over the past 5 y

204 To address this issue, we fabricated protein-decorated graphene FETs and measured

205 Large ice single crystals were used to fabricate samples with the basal, primary prism, or seco

206 Here, an innovative method of fabricating scalable PSCs on all types of organic CTLs i

207 appealing alternative to current methods for fabricating selective solar absorbers.

208 "dip-and-dry" technique is demonstrated for fabricating selectively solar-absorbing plasmonic-nanopa

209 s are a promising new class of materials for fabricating self-healing membranes.

210 As a result, our fabricated semiconducting film can be stretched up to 10

211 , they are set to become a versatile tool to fabricate sensitive and selective novel biodevices, whic

212 The fabricated sensor expressed a linear relationship to SY

213 The fabricated sensor is cheap, is disposable, and requires

214 eness and operation mechanism of this simply fabricated sensor was demonstrated by using a previously

215 Fabricated separators based on aluminum oxide nanowires

216 The fabricated silicon p-n junction exhibits clear diode rec

217 ensor with a low detection limit that can be fabricated simply in a noncomplex detection scheme is de

218 he amperometric measurements showed that the fabricated SiO2(LuPc2)PANI(PVIA)-CNB/GOx biosensor exhib

219 Fabricated solely from polymers and polymer composites,

220 Our findings may open up a solution for fabricating stable Li metal anode, which further facilit

221 verification using finite element method and fabricated structures made from copper and PDMS.

222 s been difficult, costly, and impractical to fabricate such nanowires in proper alignments by either

223 ising route in defect engineering of MoS2 to fabricate suitable devices for electronics, optoelectron

224 A novel approach to fabricate supercapacitors (SCs) via vapor printing, spec

225 hydrophobic coating and adhesive was used to fabricate superhydrophobic TiO2 NPs coated cellulose spo

226 technology, a miniature ultrasound probe was fabricated that allows for arbitrary source array geomet

227 A 3D printed mold was fabricated that could house 6 multiwall carbon nanotube

228 Multispectral colloidal metasurfaces are fabricated that exhibit greater than 85% absorption and

229 The ease to fabricate the device, the advantages related to its use,

230 However, it is still a major challenge to fabricate the flexible SERS substrate on large-area subs

231 composite possesses a promising potential to fabricate the third generation enzyme-free electrochemic

232 Thereafter, we fabricated the MNC-TFC membranes and the support layer w

233 Using a 3D printing low-cost technology we fabricated the smartphone-based device that consists in

234 use of alginate in the THIs also facilitates fabricating them as solid hydrogel matrices by adding di

235 ally dope such materials and the attempts to fabricate thermoelectric devices using nanoparticle-base

236 Previous studies have only successfully fabricated these particles in one specific size regime a

237 Additionally, the fabricated thin film shows great promise to be integrate

238 trics are low loss, inexpensive, and easy to fabricate, this approach offers a promising new route fo

239 nanocrystal clusters (NCs) are successfully fabricated through a facile emulsion-based self-assembly

240 non-close-packed nanoparticle arrays can be fabricated through the selective removal of one of two c

241 bly high elastic modulus (>10 GPa) have been fabricated through the self-assembly of ligand-stabilize

242 Fabricated tissue phantoms are instrumental in optical i

243 To solve this problem, we designed and fabricated titanium plates customized to the patients' b

244 ctrochemical responses from multiple, unique fabricated TLR sensor surfaces against the same analyte.

245 ed lipid-polymer hybrid nanosystem (LPN) was fabricated to coload paclitaxel (PTX) and tetrandrine (T

246 ovel micro-needle array (MA) delivery system fabricated to deliver a live recombinant human adenoviru

247 ed magnetoelectric nanorobot is designed and fabricated to demonstrate a proof-of-concept integrated

248 metric Li/garnet/carbon-nanotubes (LGC), are fabricated to emulate the behavior of Li metal and Li-fr

249 t this hypothesis, a near infrared probe was fabricated to have high affinity to apoptotic cells.

250 Li-ion batteries (LIBs) were fabricated to test the utility of MSNSs as an anode mate

251 ate with well-defined contact hole array was fabricated, to which radio frequency magnetron sputterin

252 To reduce this concept to practice, we fabricated two flow cells such that the mean linear flui

253 Here, we fabricate ultrathin, coherently strained films of CeO2-d

254 the first time the use of Zincke reaction to fabricate, under either solvothermal or microwave condit

255 lectrolyte as an interfacial compatibilizer, fabricating uniform perovskite films on large-area subst

256 ductor (eutectic gallium indium, EGaIn), and fabricated using a simple roller coating process.

257 Tungsten-graphene multilayer composites are fabricated using a stacking method.

258 r mode solidly mounted resonators (SMRs) are fabricated using an inclined c-axis ZnO grown on a rough

259 edge plane (MLGEP) core-shell hybrid foam is fabricated using chemical vapor deposition.

260 Single FeGe2 nanowire devices were fabricated using e-beam lithography.

261 Thin-film transistors were fabricated using environmentally benign, nonchlorinated

262 ion-selective electrodes (SC-ISEs) have been fabricated using microporous carbon (muPC) as the ion-to

263 The array is fabricated using non-covalent conjugation of an aptamer-

264 olution-processed ionic-organic ratchets are fabricated using polymer semiconductors.

265 Cytosensors were fabricated using self-assembled monolayer principle by m

266 ce(TADF) host and phosphorescent guests were fabricated using solution process.

267 iboelectric nanogenerator (TENG) was further fabricated using such AZO-CNF papers with a performance

268 ial fusion energy targets, were continuously fabricated using surfactant-free, inertial centralisatio

269 -n diodes with an ideality factor of 1.2 are fabricated using the p- and n-type doping technique to t

270 of silver-capped nanoslit arrays, which were fabricated using the thermal-embossing nanoimprint metho

271 Systems fabricated using the two techniques exhibited comparable

272 omib (BTZ) and carfilzomib (CFZ)) in devices fabricated using three different materials (polystyrene

273 Fabricated using three-dimensional colloidal nanolithogr

274 arrays of human immunoglobulin G (IgG) were fabricated using well-defined full-length antibody-polym

275 synthetic materials due to the challenges in fabricating vascularized structures.

276 ew article is focused on the sensing devices fabricated via a combination of graphene, graphene@nanop

277 metric energy density (36.1 mWh cm(-3) ) are fabricated via a facile and continuous method with low-c

278 the electrochemical sensing of NO, which was fabricated via a facile electrochemical alloying/dealloy

279 second case, a multi-metallic structure was fabricated via laser 3D printing following the transitio

280 the sample specimen of multilayer films was fabricated via photolithography process, and the surface

281 Although our FeSexTe1-x thin films were fabricated via PLD using a Fe0.94Se0.45Te0.55 target, th

282 Capsules with a liquefied core were fabricated via the assembly of polymeric droplets induce

283 Amorphous gyroid samples are fabricated via three-dimensional ceramic printing and th

284 n this paper, we developed a new pathway for fabricating WCu alloys using spark plasma infiltrating s

285 assisted wet chemistry method is employed to fabricate well-defined iron oxy-hydroxides and transitio

286 tems may allow nanoparticles of <10 nm to be fabricated which may enable coupled electrochemical reac

287 A prototype device is fabricated which shows THz intensity modulation of 96% a

288 An immunosensor was fabricated with an immobilized antibody for cardiac trop

289 The MNA was fabricated with biocompatible and dissolvable hyaluronic

290 Thus, living materials are fabricated with controlled geometry and organization and

291 with a 50microm height microfluidic channel fabricated with double-sided adhesive tape) and all the

292 e graphene oxide (GrO)/polymer interface was fabricated with in situ poly(N-isopropylacrylamide-co-di

293 The PSCs fabricated with LBSO and methylammonium lead iodide (MAP

294 arable performance to potentiometric sensors fabricated with other techniques, paving the way towards

295 ration, silicon flexible tactile sensors are fabricated with sensitivities comparable to those of hig

296 lectron acceptors, and organic photovoltaics fabricated with the ribbons show efficiencies of approxi

297 ceptional resolution and fidelity, and hCMPs fabricated with these scaffolds may significantly improv

298 n, yellow, red and warm white emissions were fabricated, with the best devices showing more than 7000

299 verted PffBT4T-2OD:EH-IDTBR blend solar cell fabricated without any processing additive achieves powe

300 there are many simple and facile methods to fabricate ZnO nanomaterials with low cost and energy con