ライフサイエンスコーパス: injector

1 oss-style injector, termed the "desegmenting injector".

2 by electroosmotic flow, termed the "discrete injector".

3 resolution compared to our previous T-shaped injector.

4 o the results obtained from the static-split injector.

5 UHPLC system to develop has been the sample injector.

6 nel leading from the sample reservoir to the injector.

7 pulse micropump, and a multilevel cross-flow injector.

8 e transient fuel sprays from a high-pressure injector.

9 fully automated mode by using an autosampler injector.

10 needle and syringe or disposable-syringe jet injector.

11 r, which allows the channel to act as a Ca2+ injector.

12 ure of 40 degrees C, and a 100-micron twin-T injector.

13 ing a Lorentz-force actuated needle-free jet injector.

14 cid methyl esters in the gas chromatographic injector.

15 ould be achieved by using the PDMS microchip injector.

16 d found to be chemically compatible with the injector.

17 appropriate, prescribing an adrenaline auto-injector.

18 ed using a programmed temperature-vaporizing injector.

19 2011 after the introduction of the automatic injector.

20 010 before the introduction of the automatic injector.

21 ny intrawound rotational manipulation of the injector.

22 ls, using a home-built electromagnetic pulse injector.

23 uperior quadrants using a specially designed injector.

24 or example, the prevalence of HIV among drug injectors.

25 neity through the thicknesses of the holmium injectors.

26 ers in the aluminium layer using tunnel spin injectors.

27 0 mg), for 30 weeks via prefilled PDS290 pen-injectors.

28 HCV will likely remain hyperendemic in drug injectors.

29 ion, but not in HAM-D improvement among drug injectors.

30 r to and following the set of eight parallel injectors.

31 herwise be impossible using conventional tee injectors.

32 edications that may include epinephrine auto-injectors.

33 njectors having equal contact with all other injectors.

34 different offset lengths of a double-T cross-injector, 10 different applied voltages, and 2 different

35 29% of participants remained persistent drug injectors, 20% ceased injection, 14% relapsed once, and

36 t-medium-only protocol with a single-syringe injector; 25 were injected by using a biphasic protocol

37 sisting of a 1 muL automatic internal sample injector, a postinjection splitter with 1:10 splitting r

38 s for the prescription of an adrenaline auto-injector (AAI), and to discuss other forms of medication

39 k patients are provided with adrenaline auto-injectors (AAIs).

40 The injector allows reproducible injections as small as 180

41 Delivering multiple samples to multiple injectors allows the autosampler time to complete its wa

42 tions were observed with a 250-micron twin-T injector, an injection time of 60 s, and a temperature o

43 device has a ferromagnet electrode as a spin injector and a spin Hall detector.

44 The combined use of a power injector and a timing examination improved S/Ns and C/Ns

45 g a split-bolus protocol with a dual-syringe injector and an initial bolus of contrast medium followe

46 gency management plan and an adrenaline auto-injector and educated to its use.

47 rotron beamline equipped with high-viscosity injector and high frame-rate detector allows typical cry

48 integrated with a very low volume stop-flow injector and mixing tee.

49 The timing of injections from the stimulus injector and the cycle time for the HPLC monitoring of t

50 designed with a strong-coupling between the injector and the upper lasing level for high internal qu

51 dministration: 31.3 per 100 person-years for injectors and 2.8 per 100 person-years for noninjectors

52 by using two quantum point contacts as spin injectors and detectors.

53 cations as nanoscale spin-polarized electron injectors and molecular wires.

54 idence of heroin use were very different for injectors and noninjectors: Incidence among injectors se

55 zation with o-phthaldialdehyde, a flow-gated injector, and a separation channel.

56 the degree of intrawound manipulation of the injector, and the time required to satisfactorily delive

57 sing a biphasic protocol with a dual-syringe injector; and 25 were injected by using a split-bolus pr

58 al, fluid-contacting materials in this valve injector are composed of ceramics and PEEK (polyethereth

59 New cartridge injectors are increasing in popularity because of their

60 New cartridge injectors are increasing in popularity because of their

61 e their long history, needle-free liquid jet injectors are not commonly used as a result of frequent

62 However, current jet injectors are not designed to maintain shallow dermal pe

63 rray injectors in place of traditional cross injectors are used to demonstrate gated injection with a

64 ossessed registrations as an adrenaline self-injector (ASJ), and timing of adrenaline administration

65 needle and syringe or disposable-syringe jet injector at a second visit.

66 illiliter of iopamidol by using a mechanical injector at increasing flow rates until the catheter fai

67 is therefore recommended that the choice of injector be matched to the size of the corneal incision.

68 Split-face, patient- and injector-blinded randomized clinical trial at the dermat

69 serial crystallography using high-viscosity injectors can also be routinely employed for room-temper

70 Further research on how HCV treatment for injectors can be scaled up and its impact on prevalence

71 rough which muscimol could be infused via an injector cannula.

72 rting of the experiments, including possible injector carry-over and lack of quality assurance/qualit

73 The injectors' characteristics were measured and correlated

74 ue to fat residues, such as dirtiness in the injector, column clogging or overlapping peaks.

75 The automatic injector combined with 24-h video and electroencephalogr

76 e device incorporated a micropreconcentrator/injector, commercial columns, micro-Deans switches, micr

77 t influenza vaccine given by needle-free jet injector compared with needle and syringe.

78 needle and syringe or disposable-syringe jet injector compromises the immunity generated, although it

79 uirements on hardware such as pumps, valves, injectors, connecting tubing, and columns.

80 Pulsed microjet injectors could be used to deliver drugs for local as we

81 Each injector created a different level of stress on the corn

82 ush away stagnant sample associated with the injector dead volume.

83 The injector design was optimized to include a pushback chan

84 The Stratis needle-free jet injector device could be used as an alternative method o

85 onse to influenza vaccine given with the jet injector device was non-inferior to the immune response

86 Provision of adrenaline auto-injector devices and education on how and when to use th

87 xis nor being prescribed an epinephrine auto-injector (EAI) contributed to impairment of HRQL.

88 ile 94% of patients took an epinephrine auto-injector (EAI) into risky situations, only 65% took it i

89 ish the trend of prescribed epinephrine auto-injectors (EAI) among paediatric populations.

90 n managing anaphylaxis, but epinephrine auto-injectors (EAIs) are underutilized by patients and their

91 This in-column injector employs a photopolymerized oligonucleotide-modi

92 ly(dimethylsiloxane) (PDMS) microchip sample injector featuring a pneumatic microvalve that separates

93 -control study of HCV seroconversion in drug injectors, focusing on transmission within networks.

94 work, we report the development of a droplet injector for capillary electrophoresis (CE) which delive

95 We describe a concentric-flow electrokinetic injector for efficiently delivering microcrystals for se

96 trap functioned as a nanoconcentrator and an injector for gas chromatography (GC).

97 A six-port loop injector for introducing stimulating solutions (stimulus

98 receive the Tan EndoGlide or the EndoSerter injector for lenticule insertion.

99 avidin-modified photopolymerized capture gel injector for microchip capillary electrophoresis (microC

100 ity received the recommended adrenaline auto-injector for self-administration at discharge.

101 or early laryngeal oedema and an epinephrine injector for severe reactions) but provision of this tre

102 The microchannel plate features a novel injector for uniform sieving matrix loading as well as h

103 The DIHEN offers optimal sensitivity at low injector gas flow rates (approximately 0.25 L/min) and h

104 It was found that a 250 microm double-T injector gave a 35% increase in peak signal compared to

105 Microcapillary injector geometries are being designed to allow increase

106 ethod to reveal the relationship between the injector geometry and the in-nozzle cavitation quantitat

107 serum samples were included (575 in the jet injector group and 574 in the needle and syringe group).

108 The jet injector group met the geometric mean titre criterion fo

109 The jet injector group met the seroconversion rate criterion for

110 The immune response of the jet injector group was regarded as non-inferior to that of t

111 Persistent injectors had the shortest follow-up and the highest mor

112 ice with an efficient in-line affinity-based injector has been developed for genetic analysis.

113 A high-pressure (> 3 MPa) on-chip injector has been developed for microchip applications i

114 lly available, remotely controlled automatic injector has been used in the pediatric epilepsy unit in

115 ns, where 5% of the clients are at any time, injectors have less access to harm reduction measures th

116 radermal adapters and disposable-syringe jet injectors, have also been developed and evaluated as alt

117 hematical models assume perfect mixing, with injectors having equal contact with all other injectors.

118 Here, we present cross and tee injectors having narrow sample channels.

119 three 10.0-F Leonard catheters with a power injector in an in vitro study.

120 sing a programmable temperature vaporization injector in place of a rotary valve or backflush system

121 e of ictal injection by use of the automatic injector in the pediatric population.

122 More rapid onset of HCV infection in drug injectors in developing/transitional countries resembles

123 ally available liners and fits into standard injectors in place of the normal liners without any need

124 , using 200-nm pore-diameter capillary array injectors in place of traditional cross injectors are us

125 rate of doctors prescribing adrenaline auto-injectors in the ED setting underlines the need to train

126 red with microdialysis probes in the NAc and injectors in the PVN.

127 study randomized 202 long-term street opioid injectors in Vancouver, British Columbia, Canada.

128 and used to compare 7 commercially available injectors in widespread clinical use.

129 bability of injection cessation among active injectors, independent of individual characteristics and

130 owed inside the entire torch, i.e., from the injector inlet up to the ionization and reaching the sam

131 ding the beads into a gas chromatograph (GC) injector insert for subsequent desorption of the collect

132 Using the narrow sample channel tee injector instead of conventional cross and double-tee in

133 The mechanical injector is implemented using in situ photopolymerizatio

134 If an adrenaline auto-injector is prescribed, education on when and how to use

135 njection valve assembly showed that this new injector is suitable for both isocratic and gradient ope

136 The injector is unique among polymer-based valves as it func

137 The jet injector is used to first inject a small volume of physi

138 to distinct migrating populations within the injector itself.

139 s for microcrystals in solution using liquid injectors, LCP-SFX reduces protein consumption by 2-3 or

140 The main advantage of using this injector lies in the fact that it does not involve time-

141 pensive modification to a gas chromatography injector liner is reported that facilitates continuous a

142 concentration either directly in the sample injector loop or within the microchannel leading from th

143 nse to Afluria when given by needle-free jet injector met the criteria for non-inferiority for all si

144 columns, micro-Deans switches, microthermal injectors, microphotoionization detectors, data acquisit

145 ts to receive vaccination by needle-free jet injector (n=627) or needle and syringe (n=623).

146 Study data comparing opioid-dependent daily injectors (N=1167) with opioid misusers who never progre

147 ction loop using a conventional autosampler (injector) needle pickup from a sample vial.

148 ed in Greece (2013-2015) and focused on drug injector networks.

149 Using a double-tee injector, no precise voltage control of the electrolyte

150 the options for many long-term street opioid injectors not attracted into or retained in available tr

151 a a deactivated fused silica capillary to an injector of a gas chromatograph.

152 derivatized amino acids into the flow-gated injector of a high-speed capillary electrophoresis-laser

153 dence interval: 0.33, 0.67) and higher among injectors of methamphetamine (adjusted prevalence ratio

154 ated separation channels connected to sample injectors on the perimeter of the 10-cm-diameter wafer.

155 The injector operated robustly over 60 days and over 1000 in

156 ed into the fast-GC module using a common GC injector or any GC x GC modulator.

157 nated by intradermal injection using the jet injector or subcutaneous needle injection exhibited comp

158 eceive protease inhibitors were current drug injectors (OR, 0.5; 95% CI, 0.3-1.0) and those recently

159 eation of drug courts to keep offending drug injectors out of prison might help to reduce transmissio

160 Scotland's IDUs, using over 2,500 anonymous injector participants who were interviewed in Scotland's

161 30 min after symptom onset, adrenaline auto-injector prescription is a necessity.

162 hila with P. aeruginosa: needle-pricking and injector-pumping.

163 ns during intraocular lens implantation by 7 injectors revealed different levels of induced stress on

164 n margins, and its level correlated with the injector's external circumference.

165 tect recent infections, TRIP classified drug injector "Seeds" into groups: Recent Seeds (RS), and Con

166 injectors and noninjectors: Incidence among injectors seemed to be stable, while in noninjectors it

167 by two common problems: the relatively large injector size and volume of injected fluid, and poor con

168 ation temperature, channel length and depth, injector size, and injection parameters were optimized.

169 n parameters such as selectivity, diffusion, injector size, device length, and channel folding was in

170 amide (LPA) were used to optimize the twin-T injector size, injection conditions, and temperature.

171 ency virus (HIV)-1 seroprevalence among drug injectors stabilizes at 30-70% for many years without se

172 ither intramuscularly with a needle-free jet injector (Stratis; PharmaJet, Golden, CO, USA) or with n

173 y achieved through cross, double-tee, or tee injector structures.

174 Among 767 drug injectors studied in 1991-1993, during a period of stabl

175 latively heavy n-type doping in the electron injectors substantially reduces the threshold current an

176 theoretical plates, although analysis of the injector suggested that improvements may be possible.

177 ance and clinical usefulness of an automated injector system (AIS) that administers an automated inje

178 The injector temperature and gas flow rates are adjusted to

179 at is directed to a microfluidic cross-style injector, termed the "desegmenting injector".

180 In the hot injector, the analytes collected on the NTD were thermal

181 instead of conventional cross and double-tee injectors, the number of reservoirs in multiplexed syste

182 Unlike the traditional cross-injector, this method enables efficient capture and inje

183 cting insulin without a needle employs a jet injector to administer a high-pressure stream of medicat

184 We used the injector to analyze microcrystals of Geobacillus stearot

185 approximately 5 micros) between exiting the injector to intersecting with the X-ray beam, our result

186 tate cooler and pneumatically driven syringe injector to measure cardiac output once per minute.

187 advice is poor--doctors give an epinephrine injector to patients, without training or advice on nut

188 t) was installed in between eluent mixer and injector to reduce contamination.

189 ample in a 4 mL reactor coupled with a GC-MS injector to simulate on line in situ derivatization-vola

190 e samples to be transferred from the AS loop injector to the nanoscale column at flow rates up to 5 m

191 ate reader equipped with software-controlled injectors to deliver a reproducible mechanical stimulus

192 oup education; the CG received standard auto-injector training only.

193 ntric spray chamber, and released through an injector tube with a diameter of 1 mm such that a LIBS p

194 ith food allergy, trained in adrenaline auto-injector use, were recruited from a hospital-based paedi

195 ection analysis without an external pump and injector valve.

196 BsAg) using a novel real-time controlled jet injector was assessed by comparison with intradermal and

197 adient generator integrated with a stop-flow injector was developed and evaluated using an on-column

198 indicated an extravasation event, the power injector was set into a pause mode.

199 In 15 inpatients, a power injector was used and a timing examination was performed

200 A 30-gauge prototype injector was used to attach a shape memory nitinol clip

201 A triple-barrel micropipet injector was used to exogenously apply three different c

202 introducing stimulating solutions (stimulus injector) was placed in-line between the syringe pump an

203 solely by voltage control (no pumps, values, injectors), we adapted the original protein electrophore

204 suggest that while handling adrenaline auto-injectors, we should keep in mind the possibility of acc

205 d microscopy, DNA sample profiles within the injector were analyzed by deconvolving the geometrical i

206 and mixing with air with an automotive fuel injector were performed at temperatures sufficiently low

207 e active GCC and the passive Stiletto needle injector were readily visualized.

208 The virtues of the novel injectors were demonstrated with poly(dimethylsiloxane)-

209 Needle-free liquid jet injectors were invented >50 years ago for the delivery o

210 in peak signal compared to a straight-cross injector, which is less than expected based on injected

211 ugs can be delivered transdermally using jet injectors, which can be an advantageous route compared t

212 ipette by means of a pressure-driven droplet injector with 1% reliability in volume delivery.

213 travenous cannula and connected to the power injector with a cable to monitor electrical skin impedan

214 Using a cross injector with reduced sample channel width, resolution,

215 ce are obtained by replacing the F8 electron injector with ZnO, which is directly deposited onto the

216 od resolution can also be obtained using tee injectors with narrow sample channels, which would other

217 atitis C virus (HCV) is hyperendemic in drug injectors, yet social structural and behavioral factors