ライフサイエンスコーパス: light-emitting

1 lecule may also have broader applications in light-emitting and photovoltaic devices.

2 ental limits of inorganic semiconductors for light emitting applications, such as holographic display

3 tals (NCs) have been employed universally in light-emitting applications during the past two years.

4 roadly applicable in solar and near-infrared light-emitting applications, where effective molecular p

5 h excellent efficiencies in photovoltaic and light-emitting applications.

6 racteristics are promising for silicon-based light-emitting applications.

7 w generation of photonic materials, spanning light emitting as well as energy harvesting applications

8 terials exhibit exceptional room temperature light emitting characteristics and enormous exciton osci

9 e a promising approach to fabricate Si-based light-emitting components with high performances enhance

10 for use in large-scale high-quality vertical light emitting device design.

11 eneration (singlet exciton fission), organic light emitting device host materials, and thermally acti

12 r layer in a typical field-activated organic light emitting device with a nanostructured, wide band g

13 l effects of reading an electronic book on a light-emitting device (LE-eBook) with reading a printed

14 high-efficiency solution processable polymer light-emitting device materials.

15 rapid developments in both photovoltaic and light-emitting device performance, the understanding of

16 In our green light-emitting device with an ITO/PEDOT:PSS/CH3NH3PbBr3/

17 organic emitter for potential use in organic light emitting devices (OLEDs) is also reported.

18 In DC-driven organic light emitting devices (OLEDs), this is relatively strai

19 n the operational characteristics of organic light emitting devices and organic photovoltaics based o

20 iciency of flexible photovoltaic and organic light emitting devices is heavily dependent on the avail

21 nced management of charge, AC-driven organic light emitting devices may well be able to rival today's

22 Organic light emitting devices using XPT and XtBuCT as dopants d

23 hnique opens up new pathways for fabricating light emitting devices with 2D materials at desired wave

24 ing oxygen evolution reactions and preparing light emitting devices, supercapacitors, and flame retar

25 rs, rather than being limited to InGaN-based light emitting devices.

26 rticular, perovskites are very promising for light-emitting devices (LEDs) due to their high color pu

27 Organic light-emitting devices (OLEDs) that use these complexes

28 fabrication of solution-processable organic light-emitting devices (OLEDs).

29 Organic light-emitting devices and solar cells are devices that

30 nal quantum efficiency of shortwave-infrared light-emitting devices by up to 50-100-fold (compared wi

31 ouble the efficiency of previous quantum-dot light-emitting devices operating at wavelengths beyond 1

32 to significantly improve the performance of light-emitting devices through defect reduction, strain

33 aylight within buildings, and evening use of light-emitting devices, all of which decrease the streng

34 ations in various fields such as bioimaging, light-emitting devices, and photocatalysis.

35 ostics and therapeutics) and optoelectronic (light-emitting devices, transistors, solar cells) applic

36 oxy composites for multiple-color- and white-light-emitting devices.

37 th implications for highly efficient organic light-emitting devices.

38 for solution-processable optoelectronic and light-emitting devices.

39 lar cells, as well as their promising use in light-emitting devices.

40 n living tissue and improve colour tuning in light-emitting devices.

41 low-cost CDots as alternative phosphors for light-emitting devices.

42 low-cost, high efficiency photovoltaic, and light-emitting devices.

43 tionally prepared films when incorporated in light-emitting devices.

44 necrosis concentrically oriented around the light-emitting diffuser, with no intervening viable pare

45 ex (DSLR) camera and an IR sensitive organic light emitting diode (IR-OLED).

46 gaseous hydrogen sulfide, employing a 470 nm light emitting diode (LED) and a microfiber optic USB sp

47 tection system comprising an interchangeable light emitting diode (LED) and a photodiode.

48 ystem was constructed using a CCD camera and light emitting diode (LED) excitation source, to measure

49 Kapton tape is demonstrated to power a 2.2 V light emitting diode (LED) for 1 min.

50 Light from a white light emitting diode (LED) source is dispersed onto a di

51 solid-state (DPSS) laser, laser diode (LD), light emitting diode (LED), super luminescent light emit

52 t developing a highly sensitive and low-cost light emitting diode (LED)-based epifluorescence sensor

53 escent light emitting diode (sLED) and micro light emitting diode (mLED) in different settings, toget

54 to obtain efficient multifunctional organic light emitting diode (OLED) materials.

55 nd 0.1 microM) were obtained with an organic light emitting diode (OLED), having an emission spectrum

56 ight emitting diode (LED), super luminescent light emitting diode (sLED) and micro light emitting dio

57 een used as an emissive dopant in an organic light emitting diode exhibiting external quantum efficie

58 A color tunable organic light emitting diode in red spectrum was attached on a t

59 A 530 nm light emitting diode was coupled to a microfluidic senso

60 ly, the paper-surface was illuminated with a light emitting diode, (ii) then, the transmitted (reflec

61 A white light-emitting diode (0.33, 0.33) is fabricated using pe

62 nO nanofilm/p-Si micropillar heterostructure light-emitting diode (LED) arrays for white light emissi

63 The influence of different wavelength of light-emitting diode (LED) at 250mumol.m(-2).s(-1) of ph

64 of different algorithms of Xpert MTB/RIF and light-emitting diode (LED) fluorescence microscopy in Ta

65 ive performances, for example a conventional light-emitting diode (LED) is driven with a 500-muA peak

66 this work, for the first time, a sub-250 nm light-emitting diode (LED) is investigated as a light so

67 that can be excited by near-infrared 740 nm light-emitting diode (LED) lamps with bright upconversio

68 This study aims to evaluate the effect of light-emitting diode (LED) light irradiation on the dono

69 0 minutes, and 5.4 J/cm(2) with either green light-emitting diode (LED) or ultraviolet-A (UV-A) irrad

70 e incorporated as the recombination layer in light-emitting diode (LED) structures.

71 er euro100 and features optional modules for light-emitting diode (LED)-based fluorescence microscopy

72 mic administration in mice followed by local light-emitting diode (LED)-based illumination, either of

73 cient electrical energy to light an external light-emitting diode (LED).

74 a down-converting layer on a commercial blue light-emitting diode (LED).

75 In this work, we designed and manufactured a light-emitting diode (LED)/PIT device and validated the

76 ution and solid films) or electrically [in a light-emitting diode (LED)].

77 The LSPR probing light source used a green light-emitting diode (LED; lambda(center) = 520 nm), and

78 drug delivery with cellular-scale inorganic light-emitting diode (mu-ILED) arrays.

79 novel high-density silicon-based microscale light-emitting diode (muLED) array, consisting of up to

80 behavior with the performance of the organic light-emitting diode (OLED) and related EL devices.

81 ctive-matrix addressing for flexible organic light-emitting diode (OLED) displays.

82 Ultimately, an organic light-emitting diode (OLED) with 24.8% peak external qua

83 By further coupling with an organic light-emitting diode (OLED), a visible and wearable touc

84 A non-doped phosphorescent organic light-emitting diode (PhOLED) based on this emitter achi

85 ricated and characterized a deep-ultraviolet light-emitting diode (UV-LED) device using this AlN/patt

86 A 235 nm deep ultraviolet-light-emitting diode (UV-LED) is employed within an on-c

87 at -40 degrees C under excitation by a blue light-emitting diode and benefits from the use of a sing

88 red respiration sensors, and used to power a light-emitting diode and to charge a storage capacitor.

89 Nitride phosphors are suitable for white light-emitting diode applications.

90 A flexible organic light-emitting diode based on tris(bipyridyl)ruthenium(I

91 pproaching that of commercial fluorescent or light-emitting diode bulbs, but with exceptional reprodu

92 such as active-matrix addressing of organic light-emitting diode displays.

93 A three-color warm-white organic light-emitting diode employing an efficient phosphor-pho

94 A deep-blue organic light-emitting diode from one phosphor exhibits Commissi

95 nts including bleomycin, salicylic acid, and light-emitting diode have shown some success.

96 y can operate with low-power density far-red light-emitting diode light.

97 ntified thousands of promising novel organic light-emitting diode molecules across the visible spectr

98 To achieve this, we fabricate a light-emitting diode structure comprising single-layer g

99 transduction between a magnet and an organic light-emitting diode that does not require electrical cu

100 ity under near-infrared illumination (730 nm light-emitting diode).

101 s, if this material is applied in an organic light-emitting diode, the generated excitons are harvest

102 paced electrically or optically with a blue light-emitting diode, with activation spread recorded si

103 diation (lambda approximately 300 nm) from a light-emitting diode.

104 ng an inexpensive and commercially available light-emitting diode.

105 ive DNA biochip based on a deep-blue organic light-emitting diode.

106 to power an ultraviolet photodetector and a light-emitting diode.

107 rate a skinlike finger-wearable driver for a light-emitting diode.

108 t that holds and illuminates the MTP using a light-emitting-diode array.

109 be utilized for high-temperature probing and light-emitting-diode lighting.

110 ormance of the first multiwavelength deep UV light-emitting-diode-based high-performance liquid chrom

111 a proof-of-concept low-cost, amplifier-free, light-emitting-diode-based low-power ion-indicator.

112 sfully applied to fabricate a yellow organic light emitting diodes (lambdamax = 568 nm, etaext = 1.9%

113 ct detection chamber equipped with a pair of light emitting diodes (LED) was studied in lab synthetic

114 escence (MEL) measurement in fullerene-based light emitting diodes (LED).

115 (QWs) are analyzed for deep ultraviolet (UV) light emitting diodes (LEDs) and lasers.

116 its were integrated into the device based on light emitting diodes (LEDs) and smart phones.

117 anches of solid-state lighting technologies, light emitting diodes (LEDs) are gradually replacing con

118 Light emitting diodes (LEDs) have been developed to emit

119 that when excited by appropriately selected light emitting diodes (LEDs), are visualized and automat

120 nt light sources, such as thermal sources or light emitting diodes (LEDs), provide relatively low pow

121 thod to monolithically integrate microscopic light emitting diodes (muLEDs) and recording sites onto

122 d high attractiveness as emitters in organic light emitting diodes (OLEDs) and other photonic applica

123 Organic light emitting diodes (OLEDs) are in widespread use in t

124 The integration of organic light emitting diodes (OLEDs) as excitation light source

125 s devices, which incorporated DNA in organic light emitting diodes (OLEDs), resulted in significant i

126 e use of nucleic acid bases (NBs) in organic light emitting diodes (OLEDs).

127 Here, we present quantum dot light emitting diodes (QDLEDs) with a metasurface-integr

128 onvertible phosphor for application in white light emitting diodes (w-LEDs).

129 d delayed fluorescence - based white organic light emitting diodes (W-OLEDs) composed of three emitte

130 ices with donor/acceptor interfaces, such as light emitting diodes and photodetectors.

131 ctronic and optoelectronic devices including light emitting diodes and solar cells.

132 ntacts on the top surface of solar cells and light emitting diodes cause shadow losses.

133 light emission, e.g., for polarized organic light emitting diodes is demonstrated.

134 plications in molecular electronics, organic light emitting diodes, and photovoltaic devices.

135 als for dyes, sensors, imaging, and flexible light emitting diodes, field-effect transistors, and pho

136 peration lifetimes and stability under white-light emitting diodes, or under a solar simulator with a

137 sistors, amplifiers, bio-sensors, actuators, light emitting diodes, photodetector arrays, photovoltai

138 nities in battery, biology, deep ultraviolet light emitting diodes, sensors, filters, and other optoe

139 died for the potential applications in white light emitting diodes, solar cells, optical codes, biome

140 class of building blocks for use in lasers, light emitting diodes, solar concentrators, and parity-t

141 infrared (1.8-2.0 mum) lasers pumped by GaN light emitting diodes.

142 ong others, solar cells, photodetectors, and light emitting diodes.

143 ze them to enhance light extraction from GaN light emitting diodes.

144 hotovoltaics, photoelectrochemical cells and light emitting diodes.

145 Efficient quasi-2D-structure perovskite light-emitting diodes (4.90 cd A(-1) ) are demonstrated

146 Light-emitting diodes (LEDs) are a potential new resourc

147 Intrinsically stretchable light-emitting diodes (LEDs) are demonstrated using orga

148 White light-emitting diodes (LEDs) are rapidly replacing conve

149 high temperature stability ultraviolet (UV) light-emitting diodes (LEDs) at 308 nm were achieved usi

150 We demonstrate fully functional blue light-emitting diodes (LEDs) by growing LED stacks on re

151 ciently manipulate the emission intensity of light-emitting diodes (LEDs) by utilizing the piezo-pola

152 The first application of light-emitting diodes (LEDs) for ultraviolet photodissoc

153 We describe light-emitting diodes (LEDs) made by stacking metallic g

154 e levels and spectra produced by solid-state light-emitting diodes (LEDs) on carotenoid content and c

155 wavelengths and irradiances achievable with light-emitting diodes (LEDs) operated on battery power.

156 t (DUV) sources, the efficiency of AlGaN DUV light-emitting diodes (LEDs) remains very low because th

157 Pure FA-perovskite-based light-emitting diodes (LEDs) with high efficiency are re

158 Fluorene-free perovskite light-emitting diodes (LEDs) with low turn-on voltages,

159 ght harvesting, wavelength downconversion in light-emitting diodes (LEDs), and optical biosensing sch

160 antennas connected to microscale, injectable light-emitting diodes (LEDs), with the ability to operat

161 amps, fluorescent light or increasingly, the light-emitting diodes (LEDs).

162 ed light (830 nm) transmitted by an array of light-emitting diodes (LEDs).

163 orates assembly and electrical connection of light-emitting diodes (LEDs).

164 es based on injectable, microscale inorganic light-emitting diodes (mu-ILEDs) with wireless control a

165 In this research, nano-ring light-emitting diodes (NRLEDs) with different wall width

166 e of such metal halide growth, green organic light-emitting diodes (OLEDs) are demonstrated using a d

167 Phosphorescent organic light-emitting diodes (OLEDs) are leading candidates for

168 Organic light-emitting diodes (OLEDs) based on DPA give pure blu

169 Solution-processed polymer organic light-emitting diodes (OLEDs) doped with triplet-triplet

170 polyfluorene matrix and demonstrate organic light-emitting diodes (OLEDs) emitting at 720 nm.

171 Direct emission of CP light from organic light-emitting diodes (OLEDs) has been a focus of resear

172 Organic light-emitting diodes (OLEDs) promise highly efficient l

173 (opto)electronic applications, e.g. organic light-emitting diodes (OLEDs), organic field-effect tran

174 novel photofunctional materials for organic light-emitting diodes (OLEDs), photovoltaic cells, chemi

175 With the example of organic light-emitting diodes (OLEDs), spectral imaging with pix

176 yer (HIL/HTL) for solution-processed organic light-emitting diodes (OLEDs).

177 r magnetic resonance spectroscopy in organic light-emitting diodes (OLEDs).

178 High-brightness blue perovskite light-emitting diodes (PeLEDs) are obtained by controlli

179 s as emitting layers, green perovskite-based light-emitting diodes (PeLEDs) exhibit electroluminescen

180 ep blue emission from phosphorescent organic light-emitting diodes (PHOLED) is required for both disp

181 onal lifetime of blue phosphorescent organic light-emitting diodes (PHOLEDs) has remained insufficien

182 ng of two emissive materials to form polymer light-emitting diodes (PLEDs) that emit light of differe

183 Here transparent quantum dot light-emitting diodes (Tr-QLEDs) are reported with high

184 deuterium lamp with bandpass filters and UV light-emitting diodes (UV LEDs) isolated wavelengths in

185 ect in the research and development of white light-emitting diodes (WLEDs) is the discovery of highly

186 The high-speed property gives the light-emitting diodes a high response speed and low dark

187 Organic light-emitting diodes and a flexible lithium ion battery

188 ation of organic electronic devices, such as light-emitting diodes and display backplanes.

189 optoelectronic devices such as solar cells, light-emitting diodes and excitonic transistors.

190 highlight the properties that have delivered light-emitting diodes and lasers.

191 realize practical devices such as efficient light-emitting diodes and nanolasers.

192 amine the use of PA-modified TCOs in organic light-emitting diodes and organic photovoltaics are comp

193 importance in solar cells and infrared (IR) light-emitting diodes and photodetectors, advances in th

194 new applications in two-dimensional lasers, light-emitting diodes and photovoltaic devices.

195 GaN-based light-emitting diodes and photovoltaics are less importa

196 for advanced optoelectronics and are used in light-emitting diodes and photovoltaics.

197 or the function of organic semiconductors in light-emitting diodes and solar cells, as well as spintr

198 Organic light-emitting diodes are a major driving force of the c

199 Bright light-emitting diodes based on solution-processable orga

200 Highly bright light-emitting diodes based on solution-processed all-in

201 Here, we report high-brightness light-emitting diodes based on solution-processed organo

202 e improve the efficiency of inverted polymer light-emitting diodes by introducing a spontaneously for

203 using interface QW concept in nitride-based light-emitting diodes for long wavelength emission.

204 Gallium-nitride-based light-emitting diodes have enabled the commercialization

205 panels, liquid crystal displays, and organic light-emitting diodes in conjunction with a critical ana

206 ite-light phosphors for use with ultraviolet light-emitting diodes in solid-state lighting devices.

207 , the quantum efficiencies of the perovskite light-emitting diodes increase at higher current densiti

208 mitting molecules used as dopants in organic light-emitting diodes is an effective strategy to improv

209 lization as a substrate for flexible organic light-emitting diodes is demonstrated.

210 n of highly efficient perovskite nanocrystal light-emitting diodes is shown.

211 uble-heterojunction nanorod light-responsive light-emitting diodes open feasible routes to a variety

212 optoelectronic applications that range from light-emitting diodes to light harvesting and light sens

213 nal, accurate, and noninvasive technique for light-emitting diodes to measure Tj in the absence of PI

214 ns ranging from field-effect transistors and light-emitting diodes to medical X-ray detectors.

215 Single-layer light-emitting diodes using the composite thin film sand

216 Light-emitting diodes utilizing double-heterojunction na

217 rm for the ITO/Au transparent electrode with light-emitting diodes was fabricated and its feasibility

218 photo-irradiated for 15 min with visible red light-emitting diodes with a light-fluence of 0.54 J/cm(

219 ed the current efficiency (CE) of perovskite light-emitting diodes with a simple bilayer structure to

220 Efficient organic light-emitting diodes with better roll-off behavior base

221 triplets is important for preparing organic light-emitting diodes with high efficiency.

222 These devices also function as light-emitting diodes with low turn-on voltage and tunab

223 Light-emitting diodes with tunable performance are demon

224 85 and 625 nm, respectively) presented by 76 light-emitting diodes, 1.8-mm spot size at different loc

225 In organic light-emitting diodes, an order of magnitude enhancement

226 erformance metrics in organic photovoltaics, light-emitting diodes, and a host of other devices, thes

227 lymers, carbon nanotubes, graphenes, organic light-emitting diodes, and diamond films fabricated via

228 electronic applications such as solar cells, light-emitting diodes, and displays.

229 lications such as solar cells, photodectors, light-emitting diodes, and lasers.

230 products such as smartphones, TV, computers, light-emitting diodes, and photovoltaic cells crucially

231 ronic devices like field-effect transistors, light-emitting diodes, and solar cells.

232 vel chip scale packages, chip resistors, and light-emitting diodes, can be reflow-soldered onto S4s w

233 ations that range from biosensors to organic light-emitting diodes, current understanding of the quan

234 nets, integrated circuits and GaAs/GaP-based light-emitting diodes, demanding 22-37%, 16-27%, and 11-

235 h different bandgaps are the basis of modern light-emitting diodes, diode lasers and high-speed trans

236 l complexes are used as photosensitizers, in light-emitting diodes, for biosensing and in photocataly

237 door for the development of highly efficient light-emitting diodes, lasers, and solar cells based on

238 c device, such as spin- and valley-polarized light-emitting diodes, on-chip lasers and two-dimensiona

239 es for indium tin oxide replacement, e.g. in light-emitting diodes, or photovoltaics.

240 ole as liquid crystalline materials, organic light-emitting diodes, photochemical switches, redox mat

241 ic transistors and circuitry, optoelectronic light-emitting diodes, photovoltaic devices and photodet

242 c glasses that serve as the active layers in light-emitting diodes, photovoltaics, and other devices.

243 yield, are employed in red and near-infrared light-emitting diodes, providing a new platform of phosp

244 eed nanoscale optoelectronic devices such as light-emitting diodes, single-photon sources and lasers.

245 mportant device applications such as lasers, light-emitting diodes, solar cells, and high-electron-mo

246 ohmic contacts for high-performance organic light-emitting diodes, solar cells, photodiodes and tran

247 their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefrac

248 pidum cultures with far-red to near-infrared light-emitting diodes, we found that these bacteria reac

249 not only be delivered by lasers, but also by light-emitting diodes, which are less expensive, safer,

250 similar to the CE of phosphorescent organic light-emitting diodes, with two modifications: We preven

251 transistors, resonant tunneling diodes, and light-emitting diodes--are also starting to emerge.

252 emiconductor devices such as solar cells and light-emitting diodes.

253 eservoir is illuminated from the bottom with light-emitting diodes.

254 ows proper design of high efficiency organic light-emitting diodes.

255 mit their applications in many areas such as light-emitting diodes.

256 m transistors are also used to drive organic light-emitting diodes.

257 em excellent candidate materials for organic light-emitting diodes.

258 y coupling light into solar cells and out of light-emitting diodes.

259 e negative repercussions for TADF in organic light-emitting diodes.

260 oe with disruptive technologies like organic light-emitting diodes.

261 he research communities of photovoltaics and light-emitting diodes.

262 cessful growth of p-type GaN by VPE for blue light-emitting diodes.

263 electronic devices, such as transistors and light-emitting diodes.

264 re used to fabricate high-efficiency organic light-emitting diodes.

265 t cause of two exigent challenges in organic light-emitting diodes; namely, efficiency roll-off and d

266 importance because the demand for high-power lighting-emitting diodes (LEDs) is currently increasing.

267 port a high-performance phosphors-free white light-emitting-diodes (w-LEDs) using Ba2V2O7 or Sr2V2O7

268 simultaneously illuminated by two different light-emitting-diodes that are spectrally located at the

269 When fabricated into a light-emitting electrochemical cell (LEC), the polymer e

270 Light-emitting electrochemical cells (LECs) with the the

271 s and have been used in the active layers in light-emitting electrochemical cells (LECs).

272 Light-emitting electrochemical cells were fabricated and

273 notubes (SWCNTs) in a microcavity-integrated light-emitting field-effect transistor to realize effici

274 advantages such as being excitable with red light, emitting in the near-infrared spectral region, sh

275 gle-protein sensors that consist of the blue-light emitting luciferase NanoLuc connected via a semifl

276 ar hybrid structure combines two-dimensional light-emitting materials with planar plasmonic waveguide

277 x reaction could be exploited as electrodes, light-emitting materials, and radical initiators, respec

278 Light-emitting materials, especially those with tunable

279 posed as a high-mobility channel material, a light emitting medium in silicon-integrated lasers, and

280 We have developed model light-emitting metallogels functionalized with lanthanid

281 Nanoscale confinement of light-emitting molecules (as functional guest) inside th

282 a new class of linear donor-bridge-acceptor light-emitting molecules, which enable solution-processe

283 esearch topics such as signal amplification, light-emitting new materials, and molecular probes with

284 ng structure and down-conversion F8BT yellow light emitting polymer.

285 polyfluorene-the benchmark wide-bandgap blue-light-emitting polymer organic semiconductor.

286 he light input angle to the fiber varies the light-emitting portion of the taper over several millime

287 ssess intriguing structures, topologies, and light emitting properties.

288 The light-emitting properties of the dialkylammonium substra

289 ly encoded voltage indicators are engineered light-emitting protein sensors that typically report neu

290 ncerns, the development of lithium-based red-light-emitting pyrotechnic compositions of high purity a

291 The development of a red-light-emitting pyrotechnic illuminant has garnered inter

292 Here we introduce a new class of light-emitting quantum dots with tunable and equalized f

293 be reengineered to extend the scope of this light-emitting reaction.

294 devices can be monolithically fabricated on light-emitting semiconductors by solely relying on physi

295 powered electroluminescent light sources and light-emitting sensing devices.

296 organoboron compounds as light-absorbing or light-emitting species in areas as relevant as organic e

297 et conversion reduces the density of triplet light-emitting states through charge-transfer complexes

298 Charge balance in organic light emitting structures is essential to simultaneously

299 there is need of such materials for organic light-emitting transistors and organic electrically pump

300 functional devices such as light-sensing and light-emitting transistors, are discussed.