ライフサイエンスコーパス: poly(dimethylsiloxane)

1 The technique was verified using bilayered polydimethylsiloxane.

2 of thin films of the biocompatible elastomer polydimethylsiloxane.

3 cated using conventional soft lithography of polydimethylsiloxane.

4 trodes and of gold electrodes patterned onto polydimethylsiloxane.

5 lease surfaces based on silicone oil-infused polydimethylsiloxane.

6 itional microfluidic devices fabricated with polydimethylsiloxane.

7 technique for fabricating micropillars with poly(dimethylsiloxane).

8 dic system was obtained by double casting of poly(dimethylsiloxane).

9 simple microfluidic devices fabricated from poly(dimethylsiloxane).

10 n rules, then 3D-printed and replicated into poly(dimethylsiloxane).

11 icrofluidic devices made of a single cast of poly(dimethylsiloxane).

12 tes with variable rigidity manufactured from poly(dimethylsiloxane), a biocompatible silicone elastom

13 viscosity, we probe this relationship using polydimethylsiloxane, a substrate whose mechanical prope

14 o wet a low-energy surface (freshly prepared polydimethylsiloxane); although, their contact angles we

15 Devices with hybrid poly(dimethylsiloxane) and glass nanochannels, 130 nm de

16 ic device is fabricated from three layers of poly(dimethylsiloxane) and has integrated pumps and valv

17 rectangular microfluidic channels molded in poly(dimethylsiloxane) and low-power coherent radiation.

18 using a microfluidic device, generated from polydimethylsiloxane and glass slide, placed on a motori

19 icrofluidic sorting device was fabricated in poly(dimethylsiloxane), and hydrodynamic flows in microc

20 3D surface topographies were replicated into poly(dimethylsiloxane), and the applications of replicas

21 is inserted between a top layer, made of Al/polydimethylsiloxane, and a bottom layer, made of Al.

22 bstrate to a variety of hosts, including Si, polydimethylsiloxane, and metal-coated substrates.

23 ells (NALM6, K562, EL4) were co-incubated on polydimethylsiloxane arrays of sub-nanoliter wells (nano

24 d micropillar arrays on wrinkled elastomeric poly(dimethylsiloxane) as a reversibly switchable optica

25 n different substrates including silicon and poly(dimethylsiloxane) as measured by fluorescence micro

26 e have used several liquids and cross-linked poly(dimethylsiloxane) as the solid to show that the est

27 ed with T3/PC71 BM blend based devices using polydimethylsiloxane as additive.

28 pentasiloxane as the responsive material and polydimethylsiloxane as the matrix material.

29 ve ligands were used: (a) hydroxy-terminated poly(dimethylsiloxane), (b) hydroxy-terminated poly(dime

30 based on the self-assembly of polyethylene-b-polydimethylsiloxane-b-polyethylene triblock copolymers.

31 ce, and auxiliary electrodes fabricated in a poly(dimethylsiloxane)-based microfluidic device.

32 ano-adhesive bonding technique to create non-polydimethylsiloxane-based devices.

33 -end-capped poly(2-methyl-2-oxazoline)-block-poly(dimethylsiloxane)-block-poly(2-methyl-2-oxa zoline)

34 izes this protein on the surface of glass or poly(dimethylsiloxane) by physical adsorption.

35 ble-width capillary channels fabricated from polydimethylsiloxane by conventional soft lithography, a

36 nate membrane filters into the reservoirs of poly(dimethylsiloxane) capillary electrophoresis microch

37 Carboxen/polydimethylsiloxane (CAR/PDMS) and polydimethylsiloxane

38 The photoactuation of pen arrays made of polydimethylsiloxane carbon nanotube composites is explo

39 consists of a thin wire coated with carboxen/polydimethylsiloxane (carboxen/PDMS) material, wound in

40 sing a variety of chlorinated solvents and a polydimethylsiloxane/carboxen (PDMS/CAR) SPME fiber, mos

41 ned using a reversibly sealable, elastomeric polydimethylsiloxane cassette, fabricated with preformed

42 been achieved by modifying the array with a poly(dimethylsiloxane) chamber and coating a thin layer

43 Dynamic modification of poly(dimethylsiloxane) channels using a mixture of n-dod

44 rowth of cells on a photoelastic substratum, polydimethylsiloxane coated with a near monolayer of fib

45 Poly(dimethylsiloxane)-coated solid-phase microextration

46 less steel/polyester fiber blended yarn, the polydimethylsiloxane-coated energy-harvesting yarn, and

47 cies were sampled in the HS using a Carboxen/polydimethylsiloxane-coated SPME fiber.

48 We prepared polydimethylsiloxane-coated stainless steel meshes for e

49 r Bar Sorptive Extraction (SBSE) involving a polydimethylsiloxane-coated stir bar with thermal desorp

50 stainless steel screens coated with a sticky polydimethylsiloxane coating for collecting LVPCs aeroso

51 The new materials consist of poly(dimethylsiloxane) composites with near-infrared-to-

52 Our poly(dimethylsiloxane) device comprises a pneumatically

53 The dependence on polydimethylsiloxane devices greatly limits the range of

54 Hybrid glass-polydimethylsiloxane diaphragm micropumps integrated int

55 The combination of a microstructured polydimethylsiloxane dielectric and the high-mobility se

56 ation of this technique is demonstrated with polydimethylsiloxane-divinylbenzene (PDMS-DVB) and polya

57 Carboxen/polydimethylsiloxane (CAR/PDMS) and polydimethylsiloxane/divinylbenzene (PDMS/DVB) TFME samp

58 d to commercial polydimethylsiloxane (PDMS), polydimethylsiloxane/divinylbenzene (PDMS/DVB), and poly

59 ent polymers such as divinylbenzene/carboxen/polydimethylsiloxane (DVB/Car/PDMS) and octadecyl/benzen

60 Patterned poly(dimethylsiloxane) elastomer is used as a template t

61 Soft, solvent-free poly(dimethylsiloxane) elastomers are fabricated by a on

62 Using prototypical poly(dimethylsiloxane) elastomers, we illustrate how thi

63 d from a composite consisting of elastomeric poly(dimethylsiloxane) embedded with a thin layer of qua

64 dy, we introduce the use of a micropatterned polydimethylsiloxane encapsulation layer to form narrow

65 aqueous samples with divinylbenzene/Carboxen/poly(dimethylsiloxane) fiber.

66 The optimized operating conditions (Carboxen/Polydimethylsiloxane fiber coating, 66 degrees C, 20 min

67 ion conditions using divinylbenzene-carboxen-polydimethylsiloxane fiber were: temperature of 50 degre

68 In this study, we explored the preloading of polydimethylsiloxane fiber with stable isotope labeled a

69 The swimmer consists of a polydimethylsiloxane filament with a short, rigid head a

70 m high volume of solution was contained by a poly(dimethylsiloxane) gasket and capped with a glass sl

71 flow sample streams are coupled to a hybrid polydimethylsiloxane-glass microfluidic device capable o

72 A microreactor fabricated from polydimethylsiloxane/glass was silanated with trimethoxy

73 different substrates (cellulose acetate and polydimethylsiloxane) in air and find that across 5 orde

74 Poly(dimethylsiloxane) is currently the material of choi

75 dient fabrication of microfluidic devices of poly(dimethylsiloxane) is described.

76 ti-trap device, consisting of a single PDMS (polydimethylsiloxane) layer, which can immobilize up to

77 row through microscopic gaps made of elastic polydimethylsiloxane material.

78 a multiwalled carbon nanotubes network and a poly(dimethylsiloxane) matrix for harvesting energy from

79 rsing graphene nanoplatelets (GNPs) within a polydimethylsiloxane matrix, we show that efficient ligh

80 rs are first immobilized on the surface of a poly(dimethylsiloxane) microchannel, followed by pumping

81 e method reported herein involves the use of poly(dimethylsiloxane) microchannels reversibly sealed t

82 ethylene terephthalate) membrane between two poly(dimethylsiloxane) microchannels.

83 ently, flow lithography relies on the use of polydimethylsiloxane microchannels, because the process

84 We report a robust, integrated poly(dimethylsiloxane) microchip interface for ESI-MS us

85 as an interconnect between two perpendicular poly(dimethylsiloxane) microfluidic channels.

86 layer soft lithography was used to prepare a poly(dimethylsiloxane) microfluidic chip that allows for

87 rn can be localized within the channels of a poly(dimethylsiloxane) microfluidic device using an embe

88 ng of high-performance separation columns in poly(dimethylsiloxane) microfluidic devices having integ

89 f high-performance chromatography columns in poly(dimethylsiloxane) microfluidic devices made by mult

90 We integrate polydimethylsiloxane microfluidic channels with these SU

91 This study reports an all-polydimethylsiloxane microfluidic chip integrated with s

92 A polydimethylsiloxane microfluidic structure has been des

93 Polydimethylsiloxane microfluidic valves and pumps are i

94 based in vitro kinase assay on an integrated polydimethylsiloxane microfluidics platform that can rep

95 croengineered substrate system consisting of poly(dimethylsiloxane) micropost arrays (PMAs) with tuna

96 s achievable by traction force microscopy or polydimethylsiloxane micropost arrays, which are the sta

97 uring of PEG-DA prepolymer introduced into a poly(dimethylsiloxane) mold.

98 aster microfabrication ( approximately 1 d), polydimethylsiloxane molding (few hours), system setup a

99 ans of elastomeric models (polyacrylamide or polydimethylsiloxane) of a soft inclusion surrounded by

100 onsists of a 500 mum diameter well made from polydimethylsiloxane on an indium-tin oxide coated micro

101 ared to those of two commercial SPME fibers [poly(dimethylsiloxane) (PDMS) and Carboxen-PDMS].

102 The immiscibility of poly(dimethylsiloxane) (PDMS) and ionic liquids (ILs) wa

103 pumped through channels in one layer of the poly(dimethylsiloxane) (PDMS) device; as these cells rel

104 s it applies to microfluidic cell culture in poly(dimethylsiloxane) (PDMS) devices and provides a pra

105 crochannels are molded onto the surface of a poly(dimethylsiloxane) (PDMS) elastomer and filled with

106 ic acid etching of a glass substrate using a poly(dimethylsiloxane) (PDMS) etch guide, we were able t

107 n the operation of an elastomeric valve in a poly(dimethylsiloxane) (PDMS) fabricated microchip and a

108 re compared to those from a commercial 7 mum poly(dimethylsiloxane) (PDMS) fiber.

109 ty, and entrapment of dye molecules in cured poly(dimethylsiloxane) (PDMS) films as a function of oli

110 studies have investigated the suitability of poly(dimethylsiloxane) (PDMS) for live cell culture.

111 Poly(dimethylsiloxane) (PDMS) has become one of the most

112 While poly(dimethylsiloxane) (PDMS) has emerged as the most po

113 hip exploits the permeation of water through poly(dimethylsiloxane) (PDMS) in order to controllably v

114 expensive microfluidic chip, fabricated from poly(dimethylsiloxane) (PDMS) incorporating conventional

115 Poly(dimethylsiloxane) (PDMS) is a commonly used elastom

116 Poly(dimethylsiloxane) (PDMS) is one of the most conveni

117 Carboxy-functional poly(dimethylsiloxane) (PDMS) ligands are attached to th

118 ontaminants permeate through a spiral hollow poly(dimethylsiloxane) (PDMS) membrane and are carried a

119 ed ethylphosphocholine (DOPC+) vesicles into poly(dimethylsiloxane) (PDMS) microchannels for immunose

120 situ synthesis of oligonucleotide probes on poly(dimethylsiloxane) (PDMS) microchannels through use

121 substrate and confined in shallow, oxidized poly(dimethylsiloxane) (PDMS) microchannels.

122 This new hybrid CE system consists of a poly(dimethylsiloxane) (PDMS) microchip sample injector

123 le, and regenerable lipid membrane arrays in poly(dimethylsiloxane) (PDMS) microchips for label-free

124 Using a sol-gel method, we have fabricated poly(dimethylsiloxane) (PDMS) microchips with SiO2 parti

125 Gold nanoparticles were synthesized in a poly(dimethylsiloxane) (PDMS) microfluidic chip by using

126 edding Ag/AgCl electrodes within a two-layer poly(dimethylsiloxane) (PDMS) microfluidic chip where an

127 carried out using an integrated emitter in a poly(dimethylsiloxane) (PDMS) microfluidic chip.

128 ophoresis of proteins was investigated using poly(dimethylsiloxane) (PDMS) microfluidic chips whose s

129 The simple and easily scalable poly(dimethylsiloxane) (PDMS) microfluidic device was fa

130 The integration of semiporous membranes into poly(dimethylsiloxane) (PDMS) microfluidic devices is us

131 This paper presents a novel poly(dimethylsiloxane) (PDMS) microfluidic immunosensor

132 The poly(dimethylsiloxane) (PDMS) molecular concentrator (1)

133 Finally, a poly(dimethylsiloxane) (PDMS) monolith modified on the s

134 A series of model systems of poly(dimethylsiloxane) (PDMS) of molecular mass 2400 Da

135 e MBJs, glass substrates were patterned with poly(dimethylsiloxane) (PDMS) oligomers by thermally-ass

136 wide by 100 mum deep) were formed by molding poly(dimethylsiloxane) (PDMS) on photoresist and then re

137 imensional (3D)-printed fluidic device where poly(dimethylsiloxane) (PDMS) or polystyrene (PS) were u

138 sed in refractive index matching monomers in poly(dimethylsiloxane) (PDMS) porous membrane.

139 ropattern a covalent surface modification on poly(dimethylsiloxane) (PDMS) provides advantages in sim

140 ade of a single mold of a silicone elastomer poly(dimethylsiloxane) (PDMS) sealed with a cover glass

141 The electroosmotic flow (EOF) in a poly(dimethylsiloxane) (PDMS) separation channel can be

142 140 mum in cross section, wall-coated with a poly(dimethylsiloxane) (PDMS) stationary phase.

143 The biosensor chip consists of poly(dimethylsiloxane) (PDMS) substrate with fabricated

144 used laser pulse and collected on a numbered poly(dimethylsiloxane) (PDMS) substrate with high viabil

145 silane reagents for surface modification of poly(dimethylsiloxane) (PDMS) substrates was developed.

146 Many advanced devices have been made from poly(dimethylsiloxane) (PDMS) to enable experiments, for

147 n of ampholyte-based isoelectric focusing in poly(dimethylsiloxane) (PDMS) using methylcellulose (MC)

148 Pressure-actuated poly(dimethylsiloxane) (PDMS) valves have been character

149 Poly(dimethylsiloxane) (PDMS) was determined to be an ex

150 osable sensor system was formed by bonding a poly(dimethylsiloxane) (PDMS) well to the glass substrat

151 to the working electrode by utilizing a thin poly(dimethylsiloxane) (PDMS) window.

152 ally combines a silicon wafer, an elastomer (poly(dimethylsiloxane) (PDMS)), and microfibers to form

153 Poly(dimethylsiloxane) (PDMS), aqueous methanol solution

154 The device, which is made from poly(dimethylsiloxane) (PDMS), implements cell-affinity

155 lectric-elastomer system, polyacrylamide and poly(dimethylsiloxane) (PDMS), is adapted for extrusion

156 ation method of polymeric nanostructure in a poly(dimethylsiloxane) (PDMS)-based microfluidic channel

157 o realize a nanofluidic preconcentrator on a poly(dimethylsiloxane) (PDMS)-based microfluidic channel

158 To this end, a poly(dimethylsiloxane) (PDMS)-based microfluidic device

159 t single-molecule "DNA curtain" imaging with poly(dimethylsiloxane) (PDMS)-based microfluidics.

160 ere identified in sample vial septa that use poly(dimethylsiloxane) (PDMS)-based polymers synthesized

161 Poly(dimethylsiloxane) (PDMS)-based valves were used for

162 yrex cap, and a cross-linked wall coating of poly(dimethylsiloxane) (PDMS).

163 xicity assay in microfluidic devices made of poly(dimethylsiloxane) (PDMS).

164 of materials including, but not limited to, poly(dimethylsiloxane) (PDMS).

165 st above microfluidic channels fabricated in poly(dimethylsiloxane) (PDMS).

166 em was fabricated using rapid prototyping in poly(dimethylsiloxane) (PDMS).

167 ma bonding like microfluidic devices made of poly(dimethylsiloxane) (PDMS).

168 ane as part of a microfluidic system made of poly(dimethylsiloxane) (PDMS).

169 A microfluidic device made of polydimethylsiloxane (PDMS) addresses key limitations in

170 g device using only a single layer of molded polydimethylsiloxane (PDMS) and a glass support substrat

171 Ps) by equilibrating 13 silicones, including polydimethylsiloxane (PDMS) and low-density polyethylene

172 ultured single human epidermal stem cells on polydimethylsiloxane (PDMS) and polyacrylamide (PAAm) hy

173 Polydimethylsiloxane (PDMS) and Polyacrylamide (PAm) hyd

174 cted water were estimated by partitioning to polydimethylsiloxane (PDMS) coated stir bars and analysi

175 ea for absorption of analytes onto a sol-gel polydimethylsiloxane (PDMS) coating for direct thermal d

176 onment, we use soft lithography to fabricate polydimethylsiloxane (PDMS) devices consisting of linear

177 hase microextraction (SPME) using a Carboxen-Polydimethylsiloxane (PDMS) fibre and entrainment on Ten

178 Given the wide adoption of polydimethylsiloxane (PDMS) for the rapid fabrication of

179 and networks of nanochannels were created in polydimethylsiloxane (PDMS) from a surface pattern of el

180 resin particles suspended in a high-density polydimethylsiloxane (PDMS) glue, which is spread onto a

181 Passive equilibrium sampling with polydimethylsiloxane (PDMS) has the potential for unbias

182 The carbon nanotubes (CNTs) filled polydimethylsiloxane (PDMS) hybrid membrane was fabricat

183 settings, we fabricated a polycarbonate (PC)-polydimethylsiloxane (PDMS) hybrid microchip using a sim

184 modulation of a sensitive film composed of a polydimethylsiloxane (PDMS) layer incorporating molecule

185 of either a submerged argon bubble or a thin polydimethylsiloxane (PDMS) layer.

186 ells embedded in extracellular matrix, three polydimethylsiloxane (PDMS) layers were built into this

187 ized polystyrene (PS), polylactide (PLA), or polydimethylsiloxane (PDMS) macromonomer mediated by the

188 In this process, the polydimethylsiloxane (PDMS) membrane was prepared by emp

189 ethanol acceptor phase in combination with a polydimethylsiloxane (PDMS) membrane.

190 roplet of suspended cells, encapsulated by a polydimethylsiloxane (PDMS) membrane.

191 ry bundle is achieved by fabricating bundled polydimethylsiloxane (PDMS) micro-pillars with graded he

192 e combine spatial and spectral encoding with polydimethylsiloxane (PDMS) microchambers for codetectio

193 ces pombe, we devised femtoliter cylindrical polydimethylsiloxane (PDMS) microchambers with varying e

194 microfluidic concentrator comprises a single polydimethylsiloxane (PDMS) microchannel onto which an i

195 structures, which can be transferred onto a polydimethylsiloxane (PDMS) microchannel through the sof

196 nd covered by a approximately 10 microm tall polydimethylsiloxane (PDMS) microchannel.

197 amera, and apply STICS to map liquid flow in polydimethylsiloxane (PDMS) microchannels.

198 Compared to polydimethylsiloxane (PDMS) microcontact printed (muprin

199 A hybrid glass-polydimethylsiloxane (PDMS) microdevice assembly is used

200 this purpose, a simple coupled-optical-fiber-polydimethylsiloxane (PDMS) microdevice was developed, t

201 A polydimethylsiloxane (PDMS) microfluidic channel is used

202 The glass surface of a glass-polydimethylsiloxane (PDMS) microfluidic channel was mod

203 In contrast, using a polydimethylsiloxane (PDMS) microfluidic deoxygenation d

204 robic species within a disposable multilayer polydimethylsiloxane (PDMS) microfluidic device with an

205 A replica molded polydimethylsiloxane (PDMS) microfluidic device with nan

206 Recently, culturing living samples within polydimethylsiloxane (PDMS) microfluidic devices has fac

207 amental technological advance for multilayer polydimethylsiloxane (PDMS) microfluidics.

208 orogenic nucleotides (TPLFNs) and resealable polydimethylsiloxane (PDMS) microreactors.

209 tio soft lithography technique, we fabricate polydimethylsiloxane (PDMS) molds containing arrays of m

210 A nanopatternable polydimethylsiloxane (PDMS) oligomer layer is demonstrat

211 Thin-film polydimethylsiloxane (PDMS) passive samplers were expose

212 ion method that exploits the relatively high polydimethylsiloxane (PDMS) permeability of H(2)S in com

213 droplets were closely packed in a two-layer polydimethylsiloxane (PDMS) platform and were flowed thr

214 nsitizing particles to specific locations on polydimethylsiloxane (PDMS) posts printed in a square ar

215 were cultured on thin, optically transparent polydimethylsiloxane (PDMS) sheets and then brought into

216 mmunoassay using an antibody microarray on a polydimethylsiloxane (PDMS) substrate modified with fluo

217 rfacial aspects of cancer cell phenotypes on polydimethylsiloxane (PDMS) substrates and indicated tha

218 rces enabled through microwells comprised of polydimethylsiloxane (PDMS) surfaces coated with a hydro

219 ver film substrates, fabricated on glass and polydimethylsiloxane (PDMS) templates, on surface-enhanc

220 kis(pentafluorophenyl)porphine (PtTFPP) into polydimethylsiloxane (PDMS) thin films.

221 stiff skin forms on surface areas of a flat polydimethylsiloxane (PDMS) upon exposure to focused ion

222 structures from an aluminum tube template to polydimethylsiloxane (PDMS) via atomic layer deposition

223 Hybrid glass-polydimethylsiloxane (PDMS) wafer-scale construction is

224 jars with mum thin coatings of the silicone polydimethylsiloxane (PDMS) was validated and applied to

225 d on a combination of solid- and liquid-core polydimethylsiloxane (PDMS) waveguides that also provide

226 Macroscopic thimbles composed of polydimethylsiloxane (PDMS) were used to site-isolate Pd

227 A process to surface pattern polydimethylsiloxane (PDMS) with ferromagnetic structure

228 , the chip was composed of a single piece of polydimethylsiloxane (PDMS) with three parallel channels

229 As examples of potential applications, a polydimethylsiloxane (PDMS) wristband with an embedded m

230 This device, made from polydimethylsiloxane (PDMS), allows the samples to be lo

231 e to simplify operation, is made entirely of polydimethylsiloxane (PDMS), and does not require any ad

232 The device is made of polydimethylsiloxane (PDMS), and ionic liquid is used to

233 ethylene (LDPE), polyoxymethylene (POM), and polydimethylsiloxane (PDMS), and organisms ranged from p

234 lture devices, such as those fabricated from polydimethylsiloxane (PDMS), collective understanding of

235 ted diluents with a poly(d,l-lactide) (PLA), polydimethylsiloxane (PDMS), or polystyrene (PS) macromo

236 tion efficiencies are compared to commercial polydimethylsiloxane (PDMS), polydimethylsiloxane/diviny

237 Nanowires are then etched and embedded into polydimethylsiloxane (PDMS), thereby realizing a device

238 nsional (3D) tissue culture platform using a polydimethylsiloxane (PDMS)-based hanging drop array (PD

239 A polydimethylsiloxane (PDMS)-based microfluidic chip with

240 n of three-dimensional master structures for polydimethylsiloxane (PDMS)-based microfluidics.

241 oxygen-generating biomaterial in the form of polydimethylsiloxane (PDMS)-encapsulated solid calcium p

242 cting the passive pump driven flow rate in a polydimethylsiloxane (PDMS)-glass hybrid microfluidic sy

243 s of ultrasound, generated by a carbon black/polydimethylsiloxane (PDMS)-photoacoustic lens, were int

244 oncentration platform into a flexible hybrid polydimethylsiloxane (PDMS)-polycarbonate (PC) microflui

245 ary column coated with a 7 mum thick film of polydimethylsiloxane (PDMS).

246 rable liquid polymer of specific interest is polydimethylsiloxane (PDMS).

247 deformability of elastomeric materials like polydimethylsiloxane (PDMS).

248 pillaries, all fabricated by micromolding of polydimethylsiloxane (PDMS).

249 s embedded in a flexible supporting layer of polydimethylsiloxane (PDMS).

250 o fabricate uniform buckled NRs supported on polydimethylsiloxane (PDMS).

251 n (SPME) based on a sorptive polymer such as polydimethylsiloxane (PDMS).

252 ous silicon (pSi), TiO2 nanotube arrays, and polydimethylsiloxane (PDMS).

253 lithography with the patterns transferred to polydimethylsiloxane (PDMS).

254 y embedding carbon nanoparticles (soot) into Polydimethylsiloxane (PDMS).

255 The detection of phenol using a hybrid polydimethylsiloxane (PDMS)/glass chronoimpedimetric mic

256 in, we report a versatile and cost-effective polydimethylsiloxane (PDMS)/paper hybrid microfluidic de

257 Four SPME fibre coatings including polydimethylsiloxane (PDMS, 100 mum), PDMS/divinylbenzen

258 ycidyl ether or dicarboxylic acid terminated polydimethylsiloxane (PDMS-DE or PDMS-DC) were encapsula

259 on between two identical OFS (using SU-8 and poly(dimethylsiloxane), PDMS) against the 36 most common

260 walls was formed by placing a 620 mum thick poly(dimethylsiloxane), PDMS, gasket with an opening of

261 g NW devices on diverse substrates including polydimethylsiloxane, Petri dishes, Kapton tapes, therma

262 Here, using submicrometer polydimethylsiloxane pillars as substrates for cell spre

263 e with a comb electrode layout fabricated in polydimethylsiloxane (PMDS) and glass.

264 tion in flow mode is achieved using a hybrid polydimethylsiloxane/polyester amperometric lab-on-a-chi

265 cle proteins, carbohydrates, algae, mussels, polydimethylsiloxane, polyethylene, polyoxymethylene, po

266 To investigate the failure of the poly(dimethylsiloxane) polymer (PDMS) at high temperatur

267 Herein we report a network of poly(dimethylsiloxane) polymer chains crosslinked by coo

268 solutions by equilibrium partitioning from a poly(dimethylsiloxane) polymer preloaded with the chemic

269 valently bonded to elastomeric substrates of poly(dimethylsiloxane) reveal responses that include wav

270 The device is made of a single cast of poly(dimethylsiloxane) sealed with a cover glass and is

271 ft fluoropolymer skin layers on pre-strained poly(dimethylsiloxane) slabs achieved crack-free surface

272 -ion full battery based on graphene-modified poly(dimethylsiloxane) sponge electrodes and an elastic

273 re prepared using a 3D interconnected porous polydimethylsiloxane sponge based on sugar cubes.

274 bstrate using a sub-100 mum stripe-patterned polydimethylsiloxane stamp for aligned carbon nanotube g

275 Using lithographically patterned poly(dimethylsiloxane) stamps, bifunctional self-assembl

276 After array construction, the poly(dimethylsiloxane) stencil is rotated 90 degrees to

277 ading and differentiation were unaffected by polydimethylsiloxane stiffness.

278 Solid phase microextraction (SPME), polydimethylsiloxane stir bar sorptive extraction, and T

279 trates, we plated epithelial monolayers onto polydimethylsiloxane substrata with a range of viscositi

280 nificantly alter the rigidity of elastomeric poly(dimethylsiloxane) substrates and a new class of 2D

281 Micropatterned poly(dimethylsiloxane) substrates fabricated by soft lit

282 Hippocampal neurons were cultured on polydimethylsiloxane substrates fabricated to have simil

283 by seeding NIH 3T3 fibroblasts on glass and polydimethylsiloxane substrates of varying stiffnesses f

284 of Pseudomonas aeruginosa PA14 on glass and polydimethylsiloxane surfaces.

285 d diverse commonly used elastomers including polydimethylsiloxane Sylgard 184, polyurethane, latex, V

286 glass hosting a microfluidic network made in polydimethylsiloxane that includes thermally actuated mi

287 g neonatal rat ventricular cardiomyocytes on polydimethylsiloxane thin films micropatterned with extr

288 the use of nanoscale fracturing of oxidized poly(dimethylsiloxane) to conveniently fabricate nanoflu

289 osited on glass slides and used as molds for polydimethylsiloxane to obtain nanovoid structures.

290 le technique that employs an antibody coated polydimethylsiloxane tube is used for effective capturin

291 y is effectively suppressed by interposing a polydimethylsiloxane wall between adjacent QCM electrode

292 y inhibiting mass transfer of water into the poly(dimethylsiloxane) walls.

293 tes the stretchability and transparency of a polydimethylsiloxane waveguide, while also serving as a

294 hyl methacrylate) (PMMA), polycarbonate, and poly(dimethylsiloxane) were tested as possible substrate

295 PtBA = poly(tert-butyl acrylate), and PDMS = polydimethylsiloxane) were created by the living crystal

296 the ability to remove common overlayers like poly(dimethylsiloxane), which was not possible using a G

297 A microgasket, fabricated from an elastomer poly(dimethylsiloxane) with a total volume of the interc

298 microfluidic device is made of two layers of poly(dimethylsiloxane) with integrated membrane valves.

299 ng of low-molecular-weight polystyrene-block-polydimethylsiloxane with a lattice spacing of 11 nm on

300 sed block copolymer poly(3-hexylthiophene)-b-poly(dimethylsiloxane) yields cylindrical micelles with