ライフサイエンスコーパス: thermoplastic

1 ybutyrate that are a source of biodegradable thermoplastic.

2 M from thermal decomposition of nano-enabled thermoplastics.

3 ng of epoxy thermosets that do not exist for thermoplastics.

4 ymers and the processability/adaptibility of thermoplastics.

5 structures are assembled using wax as both a thermoplastic adhesive layer between two glass substrate

6 orporation of nanoparticles into engineering thermoplastics affords engineers an opportunity to synth

7 acterization of microfluidic devices made of thermoplastic and elastomeric polymers.

8 e/butylene-styrene (SEBS) copolymers combine thermoplastic and elastomeric properties to provide micr

9 aterials with properties similar to those of thermoplastics and are an environmentally friendly alter

10 ces with the advantageous properties of hard thermoplastics and ease of fabrication similar to PDMS.

11 applications have been largely restricted to thermoplastics and thermosets.

12 However, thermoplastics are also known to exhibit autofluorescenc

13 hough glass could be used as an alternative, thermoplastics are better from a cost and fabrication pe

14 ting of polymers is accomplished easily with thermoplastics as the extruded hot melt solidifies rapid

15 s to robust, machinable formats that exhibit thermoplastic behavior consenting material reshaping at

16 Unfortunately, biopolymers exhibiting thermoplastic behaviour and which preserve their mechani

17 The thermoplastic binder enables the electrodes to be hot em

18 t composite graphite electrodes containing a thermoplastic binder.

19 al cancellous chips uniformly dispersed in a thermoplastic biologic carrier.

20 and cuttlefish are one notable exception of thermoplastic biopolymers.

21 mmercially available paraffin wax-polyolefin thermoplastic blend (elastomer matrix binder) with bulk-

22 robot while their arm was held in place by a thermoplastic brace.

23 nd make the case that nanofiller presence in thermoplastics can significantly affect the physicochemi

24 (LT) PGA/TMC membrane and an allograft in a thermoplastic carrier.

25 s and yields more affordable cost than other thermoplastics commonly used for microfluidic applicatio

26 e present formulation of a simple conductive thermoplastic composite we term 'carbomorph' and demonst

27 A series of flattened-nanotube reinforced thermoplastic composites are sizably fabricated as a fun

28 This cube, made of thermoplastic, contains reservoirs and channels for liqu

29 ) from thermal decomposition of nano-enabled thermoplastics, critical questions about the effect of n

30 osed of 3 functional modules including (i) a thermoplastic CTC selection module composed of high aspe

31 Hot-embossed thermoplastic devices allow for high-throughput analysis

32 as observed in PDMS devices compared to both thermoplastic devices.

33 ene propylene diene monomer rubber (EPDM) or thermoplastic elastomer (TPE) eluates, reflect the stron

34 We demonstrate the use of thermoplastic elastomer gels as advanced substrates for

35 ersion of 1-5 vol.% of carbon nanotubes in a thermoplastic elastomer yields nanocomposites that can s

36 We demonstrate that a thermoplastic elastomer-poly(vinyl alcohol) (PVA) compos

37 es the advantageous mechanical properties of thermoplastic elastomers and the dynamic self-healing fe

38 Following mechanical damage, these thermoplastic elastomers show excellent self-healing abi

39 e show a design of multiphase supramolecular thermoplastic elastomers that combine high modulus and t

40 rentially reinforce the hard microdomains of thermoplastic elastomers with smectic clay of similar ch

41 -cost carbon fibers, engineered plastics and thermoplastic elastomers, polymeric foams, fungible fuel

42 so provide potential alternatives to current thermoplastic elastomers, rubber-modified plastics, and

43 bon nanotube electrical components and tough thermoplastic elastomers.

44 ical performance, unlike commercial styrenic thermoplastic elastomers.

45 temperatures, show significant potential as thermoplastic elastomers.

46 ircuit substrate in combination with printed thermoplastic electrically conductive adhesives (ECA), w

47 The electrodes, which are termed thermoplastic electrodes (TPEs), are easy to fabricate a

48 luation of LCPM for the case of polyurethane thermoplastic enabled with carbon nanotubes (PU-CNT).

49 ood processes such as fermentation, malting, thermoplastic extrusion or enzymatic, alkaline and acid

50 In this technique, a transparent thermoplastic film (ethylene vinyl acetate polymer) is a

51 Thermoplastic films (50-75 microm thickness) are coated

52 identified the composition with the highest thermoplastic formability in the glass-forming system Mg

53 ricated simultaneously and characterized for thermoplastic formability through parallel blow forming.

54 to traditional metal processing techniques, thermoplastic forming (TPF)-based microfabrication metho

55 llization of BMG formers has uncovered novel thermoplastic forming (TPF)-based processing opportuniti

56 ttlement of amorphous alloys associated with thermoplastic forming and yields new insight the forming

57 ce rivalling advanced engineering alloys and thermoplastic forming capabilities analogous to conventi

58 ctural homogeneity and isotropy, and ease of thermoplastic forming exhibited by these materials.

59 Rapid thermoplastic forming of the undercooled liquid into com

60 als that offer the unique ability to perform thermoplastic forming operations at low thermal budget w

61 s array as part of a microfluidic chamber in thermoplastic material and performed multiplexed SP-PCR

62 g a solid or liquid, and use potentially any thermoplastic material without processing additives.

63 Although thermoplastic materials are mostly derived from petro-ch

64 ene co-methacrylic acid) ionomers (EMAA) are thermoplastic materials that when punctured, cut, shot o

65 A variety of ceramic substrates, thermoplastic materials, and metals can be used; e.g., i

66 by embossing features from a hard mould onto thermoplastic materials, typically polymers with low gla

67 ant to the processing and to applications of thermoplastic materials.

68 ew entry point for researchers interested in thermoplastic microchips and can accelerate the developm

69 iscuss the development and clinical use of a thermoplastic modular microsystem for the high-throughpu

70 An inexpensive, magnetic thermoplastic nanomaterial is developed utilizing a hier

71 The thermoplastic nature also enables excellent mechanical s

72 ices with low adsorption properties from the thermoplastics poly(methyl methacrylate) (PMMA), polysty

73 rmance, all-aromatic, insoluble, engineering thermoplastic polyimides, such as pyromellitic dianhydri

74 , which are involved in the synthesis of the thermoplastic polymer polyhydroxybutyric acid.

75 r and transformation of polyamide-6 (PA6), a thermoplastic polymer widely used in industry during sim

76 Thermoplastic polymers (plastics) allow easy surface tre

77 , including metals, ceramics, thermoset, and thermoplastic polymers.

78 wrinkles were created by chemically treating thermoplastic polystyrene sheets to form a thin skin lay

79 non-solvent liquids, porous carbon nanofiber/thermoplastic polyurethane (CNF/TPU) nanocomposites were

80 The strain-induced softening of thermoplastic polyurethane elastomers (TPUs), known as t

81 Thermoplastic polyurethane elastomers enjoy an exception

82 r results provide guidance for the design of thermoplastic processing methods and methods for verifyi

83 Here we describe thermoplastic processing of squid SRT via hot extrusion

84 duced PHA suggest that they are suitable for thermoplastic processing.

85 hydroxyalkanoates) are natural polymers with thermoplastic properties.

86 tion (HDA) to amplify the DNA in a low-cost, thermoplastic reaction chip heated with a pair of commer

87 ricated by plasma treatment of a prestressed thermoplastic shrink film to create tunable multiscaled

88 We found that nanofiller presence in thermoplastics significantly enhances not only the total

89 res occurs spontaneously when a metal-coated thermoplastic stamp is compressed against a ceramic subs

90 ures on ceramic surfaces using metal-coated, thermoplastic stamps.

91 ign of biomimetic protein- and peptide-based thermoplastic structural biopolymers with potential biom

92 Thermoplastics such as polystyrene (PS) and cyclo-olefin

93 Thermoplastic surfaces were oxidized using UV-generated

94 Here, we combine large-scale thermoplastic tensile deformation of collections of Pt-b

95 PSUs are high-performance engineering thermoplastics that are commonly used for reverse osmosi

96 The range of polymers used in AM encompasses thermoplastics, thermosets, elastomers, hydrogels, funct