ライフサイエンスコーパス: holder

1 e without the permission of the patent title holder.

2 plate after removing the transmission source holder.

3 SASP) from spore samples on the MALDI sample holder.

4 paration channel via "sliding" the electrode holder.

5 arge cryo-EM datasets with a side-entry cryo-holder.

6 omponents are installed in a polylactic acid holder.

7 th a three-dimensional (3D)-printed organoid holder.

8 rious operating conditions using Pall filter holder.

9 ith portable syringe pump and a new membrane holder.

10 dinally sectioned using a custom-made sample holder.

11 n was used to return a kidney to the voucher holder.

12 ctric transmission electron microscope (TEM) holder.

13 ontained in a custom-built 3D-printed rotary holder.

14 r integrated with a custom-designed multipen holder.

15 le experiment using a nitrogen cooled sample holder.

16 ted with a microfluidic device as NMR sample holder.

17 orous HF attached to a tapered polypropylene holder.

18 -1 in liquid using an in situ fluid cell TEM holder.

19 microchip is adaptable to all commercial TEM holders.

20 high-speed rotors that also serve as sample holders.

21 ng the territory on the death of the current holders.

22 ty will lead to many false-positive passport holders.

23 collected without the consent of data rights holders.

24 rom the existing and past donors and voucher holders.

25 een 15 FV redemptions with over 5000 voucher holders.

26 patient interface design with movable sensor holders.

27 the regulator on the marketing authorisation holders.

28 ations, housed in novel 3D printed electrode holders.

29 researchers, environmentalists and the stake holders.

30 ys using custom-made subsurface nanoparticle holders.

31 to be far more acidic than the former record holder, (1-C(4)F(9)SO(2))(2)NH (i.e., DeltaH degrees (ac

32 e not statistically higher than those of PhD holders (17.9+/-0.6) and those with both an MD and PhD d

33 the tube); 2) rotor angulation for the tube holder; 3) revolutions per minute (RPM) and time; 4) RCF

34 ake action and get the test, and 668 account holders (68.0%) had financial interests.

35 The system consists of a quartz holder (a modified version of conventional MIC) placed i

36 On December 1, 2011, in Flynn v. Holder, a panel of the US Court of Appeals for the Ninth

37 the animal is anesthetized and placed in the holder, a typical imaging experiment takes less than 2 m

38 To this end, a DESI interface and a custom holder accommodating SPME probes were built in house, wi

39 Bangladesh is dominated by a small-holder agrarian economy under extreme stress.

40 Carbon financing for small-holder agriculture could increase the likelihood of succ

41 ations of Bangladesh, and suggest that small-holder agriculture there is likely to continue on a "mut

42 on density and growth rates, uptake of small-holder agriculture, and livestock population trends do n

43 y allows imaging of samples on flat bottomed holders, allowing integration with microfluidic devices,

44 the cylindrical SERS substrates into a solid holder, an array of cylindrical substrates was produced

45 plication using a custom-built 9-fold sample holder and a (19)F-MRI coil.

46 ed with a prototypic stepping table and coil holder and a 15-20-mL injection of contrast material was

47 urther packed into a reusable syringe filter holder and applied as an adsorbent for solid phase extra

48 l reveals that the Spt4/5 is an upstream DNA holder and contacts the nontemplate DNA in the transcrip

49 sel, Mytilus californianus, a dominant space holder and foundation species in this system.

50 We designed a 3D printed smartphone holder and image processing software for field analysis

51 ustion, the PP vessels containing the quartz holder and sample were placed in a specially designed me

52 The mass analyzer was mounted in a polymer holder and tested in a custom vacuum system using modifi

53 ous rats, the head of the rat was fixed in a holder and the animals were trained to comply with this

54 tection apparatus using a 3D-printed compact holder and the built-in camera of a smartphone.

55 yes were positioned in a specially developed holder and transfixed to the retinal layers with a micro

56 e investment returns of 8.9-11.4% for equity holders and 5-8% for 'research-backed obligation' holder

57 rial hysteresis and indicates that territory holders and floaters can coexist only in the process of

58 as achieved with Peltier cooler/heater probe holders and water perfused suits, respectively.

59 inates the restriction for a metallic sample holder, and allows for the potential analysis of samples

60 A quartz device was used as a sample holder, and the influence of the absorber solution was e

61 nt on an insurance policy (vs primary policy holder) (aOR, 0.71; 95% CI, 0.67-0.74); whereas older ag

62 to understand which, and how many knowledge holders are needed to ensure that management recommendat

63 Refugees and other select visa holders are recommended to receive a domestic medical ex

64 ament porosity as well as an inorganic space-holder as an intra-filament porogen.

65 We identified frazzled and GUK-holder as the downstream effectors regulated by these mo

66 the CuNCs@BSA found to play as a conductive holder as well as an accumulator of redox active centers

67 he literature are explained by viewing power holders as more flexible and dynamic than is usually ass

68 is driven to vibrate by the motion of a tip holder assembly which contains ferromagnetic materials.

69 f a 10-mL syringe that is attached to a disk holder assembly.

70 grated with a custom-made dark hood and base holder assembly.

71 r colorimetric imaging via the hood and base-holder assembly.

72 here the sample is placed either on a sample holder at the bottom of the IS surface or mounted in the

73 n inserted into a low-cost 3D-printed sample holder attached to the phone.

74 n inserted into a low-cost 3D-printed sample holder attached to the phone.

75 s whether the use of evidence or the account holder being a physician or having financial interests i

76 Younger age group, males, literates, service holders, best corrected visual acuity >0.3 LogMAR, were

77 without using a binder, placed into a filter holder between filter papers on a syringe tip and used a

78 This 96-well holder brings new utilities to high-throughput, cell-bas

79 ed in one application (the endoscopic needle holder) by understanding and imitating the design princi

80 even more pronounced in side-entry specimen holders common on modern transmission electron microscop

81 e sandwiched between reusable plastic filter holders connected to a disposable syringe.

82 A reusable chip holder consisting of two plastic plates and an elastomer

83 o a temperature-controlled microscope sample holder containing a germinant solution plus a nucleic ac

84 ally designed three-dimensional (3D)-printed holder containing an automatically actuated electromagne

85 collection step using a homemade 3D-printed holder containing an embedded rare-earth magnet.

86 With this aim, a holder containing metal wires that act as reusable refer

87 plane of the lower surface of the electrode holder cutting off the top of the drop.

88 vestigated antibiotic use practices in small-holder dairy farms, antibiotic quality, and antimicrobia

89 oor quality are accessible and used in small-holder dairy systems, which can be found in milk.

90 the study period: 281 (63%) were donor card holders (DCH) and 163 (37%) were not DCH.

91 Tool and tool holder deflections are estimated using finite element si

92 estimate the material springback, tool/tool holder deflections, and errors due to machine compliance

93 l electrophoresis was performed on a special holder designed to couple isoelectric focusing with SDS-

94 We also present case studies of sample holders designed to accommodate multiple single crystal

95 nd within the 3.5-mm open prongs of a needle holder during needle perforation.

96 ible 3D printed elastomer at the base of the holder ensures a good seal with the microfluidic chip.

97 se of NCs, which play the role of conductive holders, established a simple immobilization procedure b

98 we show that a silicon crystal glued to its holder exhibits a rate of low-energy phonon events that

99 oughness of the boundary, as measured by its Holder exponent H.

100 inner side of a ring-shaped flexible plastic holder (fabricated using a nonconductive filament).

101 ertilisers are often not available and small-holder farmers suffer the resultant poor yields.

102 e and buffaloes and the livelihoods of small-holder farmers that depend upon them.

103 ountries, which are often dominated by small-holder farmers, implies that they may be in response to

104 rain the livelihoods and production of small-holder farmers.

105 curity issues related to limited-input small-holder farming and climate stress.

106 The ongoing agrarian transition from small-holder farming to large-scale commercial agriculture is

107 sion electron microscope side-entry specimen holder, featuring continuous cryogen flow and vibration

108 ht spider silk, which is the previous record holder for a moisture driven muscle.

109 e IRRAMICE, and (iii) Gafchromic film in the holder for a relative evaluation of the collimation syst

110 ties surpassing that of IRMOF-20, the record-holder for balanced hydrogen capacity, are demonstrated:

111 for L produced by the method of Farrall and Holder for cleft lip/cleft palate data is not consistent

112 ficient, and 3D printed quasi-optical sample holder for improving the signal-to-noise ratio (SNR) in

113 ristic obviates the need for an extra framed holder for rapid TFME and makes the samplers more robust

114 n the current work, we developed an improved holder for the temperature sensor located in the rotor h

115 The electrode holder for the working (WE), counter and reference elect

116 substrates demonstrated their suitability as holders for both in-drop volatile enrichment and subsequ

117 he future, including achieving stable sample holders for ultralow temperature (below 10K) atomic-scal

118 This work supports the role of DnaK as a "holder" for incomplete N-terminal polypeptides.

119 FA allows electrical isolation of the sample holder from ion extraction/acceleration and selectively

120 We have developed a micro-fabricated sample holder from single crystalline silicon with micropores,

121 All needle holders functioned poorly with thin-walled needles.

122 characteristics of examinee and certificate-holder groups; examination performances from different u

123 an syndrome (NHS) protein and Drosophila GUK-holder (Gukh), which have been shown to interact with co

124 Women and men K grant holders had a similar mean (SD) number of R01 applicatio

125 sts or were not in English or if the account holders had fewer than 1000 followers.

126 This holder has been used successfully during four beamtimes

127 ramed by variations in the behavior of small-holders, has grown from a simple demand-production relat

128 light the importance of ensuring that office holders have access to reliable information about voters

129 As the density further increases, territory holders have to spend much more time in defending their

130 printing can be used to fabricate the sample holder housing (stator) in one shot, while the radiofreq

131 cies seem influential: the percentage of job holders identifying as veterans in the civilian US execu

132 ed by the employment status of the insurance holder (ie, employed, long- or short-term unemployed, lo

133 A distant relative of the previous record holder, Illacme plenipes from California, it belongs to

134 of 5 degrees C min(-1) and an alumina sample holder improve the efficiency of the drying process.

135 ionally identical crystal suspended from its holder in a low-stress state.

136 he same tissue section using a single sample holder in copper.

137 An optical probe was used as the droplet holder in the HS-SDME procedure, and the analytical sign

138 pared the use of dental floss to a toothpick holder in the improvement of gingival health.

139 pellets within a mouse phantom and a bespoke holder in the IRRAMICE, and (iii) Gafchromic film in the

140 ling and the D-Wave Hybrid solver as a place-holder in wait of quantum hardware developments.

141 ies distributed globally, and dominant space holders in intertidal and subtidal systems.

142 We advocate for more diverse knowledge holders in local knowledge research and application.

143 On average, the small-holders in question kept pace with the demands on produc

144 dge, recognize its value, and to include ILK holders in resource management and decision-making.

145 is compatible with common biological sample holders, including multi-well plates.

146 ut urge recognition of adolescents as rights holders, including rights in relation to sexuality.

147 inning frequency for several types of sample holders, including the standard disposable inserts class

148 The dry SPE holder is "snapped" in the paper spray cartridge.

149 st galaxies with redshifts z > 2; the record-holder is at z = 4.69.

150 The injector holder is designed to be flexible, allowing each device

151 A custom sample-holder is presented which redirects light that would not

152 established standards and when a certificate holder is required to periodically demonstrate command o

153 In the final step, the holder is set on top of the microfluidic open interface

154 A custom-made 96-well holder isolated the cell-containing zones from each othe

155 population growth, cattle numbers, or small-holder land use.

156 S12, the thiostannate analogue of the record holder Li10GeP2S12 and the second compound of this class

157 The holder maintains a constant position of the HF in a CE v

158 The sample holder makes use of an adjustable sample positioner that

159 GPS-collared territory holders marked and defended communication hubs (CHs) in

160 ue-clearing protocol, and transparent sample-holder material.

161 rescence measurements using the Cary-Eclipse holder may be feasible for long-term stability studies a

162 advances include the application of power or Holder means to construct descriptors that generalize ov

163 ) has been proposed as an alternative to the Holder method (HoP, 62.5 degrees C, 30 min), to increase

164 In Phase 2, follow up interviews with role-holders (n=4) were conducted.

165 lecule (Amber) as a nonfluorescent (N) place holder: namely, NDAN, NDNA, and ADNN duplexes, and the f

166 Single-crystal tin selenide (SnSe), a record holder of high-performance thermoelectric materials, ena

167 o procure organs based on the consent of the holder of the deceased's durable power of attorney, wher

168 the main regional contributor and still the holder of the deepest and most extended peat areas in th

169 e leveraged for future studies.The copyright holder of the image (the herbarium sheet of Arabidopsis

170 ctice professionals (APPs), and nonphysician holders of doctoral degrees were compared, and generaliz

171 t data from each cohort were provided by the holders of the original data to a central site, where al

172 ine the difference in patient outcomes among holders of time-limited and time-unlimited certificates

173 ontally placed shock tube and a solid object holder on the floor of the test section.

174 esthetized mouse was placed in a cylindrical holder on the positioning stage, and a single operator a

175 dividually matched with 140 driver's license holders on age, race, sex, educational attainment, and z

176 This is achieved by mounting the sample holder onto an automated XYZ stage, defining the tilt of

177 otionless or stable platform, such as a tool holder or lathe bed, to sense vibrations.

178 he microscope using a standard cryo-transfer holder or, alternatively, using a cryo-cartridge loading

179 conveniently by microscopes without special holders or advanced beam technology.

180 unt of Igs was significantly decreased after Holder pasteurisation (20%, 51% and 23% for IgA, IgM and

181 The effect of Holder pasteurisation (HoP) (62.5 degrees C for 30 min)

182 In this work, we investigated Holder pasteurisation and high-pressure processing (HPP)

183 d was applied to the study of the effects of Holder pasteurisation and high-pressure processing on th

184 Holder pasteurization (62.5 degrees C, 30 min) of human

185 Holder pasteurization (62.5 degrees C, 30min) applied in

186 Holder pasteurization (HoP) (62.5 degrees C, 30 min) of

187 In this study we analyzed the impact of Holder pasteurization (HoP) on the metabolic and lipidom

188 eurization was proposed as an alternative to Holder pasteurization (HOP) to increase the retention of

189 le salt-stimulated lipase (BSSL) compared to Holder pasteurization (HoP), yet the impact of HPP and s

190 ), donor milk (DM) is commonly sterilized by Holder pasteurization (HoP).

191 rd convection heating (CH) method, including holder pasteurization (HoP).

192 ssure (HHP, 400-600 MPa at 5 and 10 min) and Holder pasteurization (HoP, 62.5 C, 30 min) on protein p

193 ssure (HHP, 400-600 MPa at 5 and 10 min) and Holder pasteurization (HoP, 62.5 degrees C, 30 min) on p

194 Holder pasteurization has been reported to modify human

195 Holder pasteurization is the current recommended method

196 luated the effect of pasteurization methods (Holder pasteurization, high-temperature short-time (HTST

197 term human milk was digested as raw or after Holder pasteurization.

198 changes in volatile and protein profiles in Holder pasteurized and freeze-dried DHM was negligible c

199 After culture and disassembly of the holder, peeling the layers apart "sectioned" the individ

200 The holder position is automatically set using a stepper mot

201 ixation and staining of specimens inside the holder, preserving the delicate morphology of e.g. fragi

202 o a commercially available endoscopic needle holder resulted in calculated force amplification up to

203 nd that the use of dental floss or toothpick holder resulted in no significantly different effect in

204 (methyl methacrylate) (PMMA) well-containing holders resulting in a low cost multichambered chip.

205 al crystals randomly located on fixed target holders, resulting in the highest indexing rates observe

206 r both depends on the location of the proton holder(s) in multiply protonated peptides.

207 thered over all the angles due to the sample holder setup or shape of the sample.

208 es the immobilization station from the blade holder, significantly simplifying the operational workfl

209 SIV holders (SIVH) are applicants who were employed by, or o

210 ,000 and 19,000 Special Immigrant Visa (SIV) holders (SIVH) from Iraq and Afghanistan resettle in the

211 admitted over 80,000 Special Immigrant Visa holders (SIVH), which include children.

212 y to provide substantial benefits to voucher holders, society, and public health organisations.

213 roelectrodes are individually fixed to a new holder system by magnetic forces.

214 e describe here the development of a cuvette holder that allows reagent injection and sample mixing w

215 minoSiPM, which includes a 3D printed sample holder that can be adapted for both liquid samples and p

216 In extending C-SPE to MC-SPE, a filter holder that incorporates discrete analysis channels and

217 es the mSPB from the satellite is a distance holder that prevents deleterious fusion of both structur

218 This included a multicompartment holder that, when combined with NMR slice selection tech

219 powder that was easy to tamp into AMS target holders that also facilitated high throughput.

220 ions held by academic institutions and other holders that are not standard gene banks should be bette

221 thick sagittal tooth sections were placed in holders that exposed only the carious enamel surface.

222 lation of a new DLG-interacting protein, GUK-holder, that interacts with the GUK domain of DLG and wh

223 ries of linear stages, cameras, and stimulus holders, the ARM is more accurate at hitting the desired

224 ive application of 3 solutions to the sample holder: the matrix in acetone, the products in water, an

225 lastic pipet tips as microreactors or sensor holders, these devices integrate electrochemical and opt

226 ere kept in this way by successive territory holders, thus maintaining this overdispersed distributio

227 f GFS are (1) a modified "air-outlet" filter holder to maximize filtration rate and thus minimize fil

228 d with the appropriate design of a microchip holder to suitably position the microchannels in the mic

229 Distributed network technologies allow data holders to control all uses of their data, which overcom

230 y homomorphic encryption (MHE) to allow data holders to cooperatively compute the relatedness coeffic

231 pplicants are checked against a list of visa holders to detect visa fraud, and visitors entering the

232 th; thin centerpieces with integrated window holders to provide very short optical pathlengths that r

233 and most have licenses that allow copyright holders to retain ownership while providing specified ri

234 2020, the COVID-19 pandemic has urged event holders to shift conferences online.

235 dyads (1 parent: 1 teenaged learner's-permit holder) to test TDP effectiveness on increasing the quan

236 maintained on a specifically designed sample holder, to probe either dye-modified or bare NPs.

237 o tilt angles of a single tilt-axis specimen holder together with the three-dimensional map whose han

238 s device consisted of a microchip, microchip holder, two 0-8-kV high-voltage power supplies, a high-v

239 At 12 weeks, 27 floss users and 20 toothpick-holder users completed the study.

240 either a dental flossing group or toothpick holder using group.

241 When optimally tuned, the sample holder was able to improve co-polar isolation by 20 deci

242 The quartz holder was carefully designed to avoid excessive heating

243 A custom 3D-printed holder was designed and built to facilitate the aerosol

244 bility with a metallic sponge-forceps needle holder was equal to or greater than those with other dev

245 A customized holder was fabricated by 3D printing to ensure the attac

246 O electrode attached with a customized aorta holder was used to directly measure the flux of NO diffu

247 Special target holders were constructed to allow target samples of diff

248 3D printed sensor holders were designed to ensure quick and consistent sen

249 hods: Aluminum, niobium, and tantalum target holders were used with titanium foils and pressed TiO(2)

250 le interfacing occurs via a universal sample holder which is compatible with both solid and liquid sa

251 g of two samples simultaneously mounted on a holder, which enabled a multiplied gasochromic response

252 oach is based on a specially designed sample holder, which enables a variety of electrochemical exper

253 al AuNPs and enantiomers in the first filter holder, which results in aggregation of AuNPs to give a

254 rs and 5-8% for 'research-backed obligation' holders, which are lower than typical venture-capital hu

255 pected behaviors of those with whom the norm holder will interact.

256 de open-source plans to a 3D-printed cuvette holder with an interchangeable narrow-spectral bandwidth

257 Imaging was performed in a standard head holder with standard padding.

258 A total of 982 posts from account holders with a combined 194 200 000 followers were analy

259 ance was measured using a vertical diffusion holder, with the stratum corneum placed between two elec

260 cipant observation and shadowing of the role holders' working day (n=9), together with analysis of or