ライフサイエンスコーパス: indium tin oxide

1 d by conductive inorganic materials (such as indium tin oxide).

2 ance and yield become close to devices using indium tin oxide.

3 h at least a similar workfunction to that of Indium Tin Oxide.

4 ies are comparable to those fabricated using indium tin oxide.

5 the corresponding parameters for commercial indium-tin oxide.

6 smittance > 70%) that are rivalling those of indium-tin oxide.

7 printed on chips coated with either gold or indium-tin oxide.

8 ighly conductive, transparent amorphous zinc indium tin oxide (a-ZITO) electrodes.

9 (TOI) gate dielectric with an amorphous zinc-indium-tin oxide (a-ZITO) transparent oxide semiconducto

10 d quartz, and to conductor supports, such as indium tin oxide, aluminum, highly ordered pyrolytic gra

11 g the composite thin film sandwiched between indium tin oxide and indium-gallium eutectic alloy exhib

12 ransparent conducting oxides (TCOs), such as indium tin oxide and zinc oxide, play an important role

13 A novel titanium/indium tin oxide annealed alloy is exploited as transpar

14 y >10(10) cm(-2) at the interface between an indium tin oxide anode and the common small molecule org

15 0%) than other transparent materials such as indium tin oxide ( approximately 80%) and ultrathin meta

16 ks are considered a promising alternative to indium tin oxide as transparent conductors.

17 rodes made from graphene (at the bottom) and indium tin oxide (at the top) for dielectrophoretic cell

18 We present indium-tin-oxide-based photocurrent measurements that re

19 stacks of naphthalenediimides were grown on indium tin oxide by ring-opening disulfide-exchange poly

20 We report that indium tin oxide can acquire an ultrafast and large inte

21 rent limit of transparent conductors such as indium tin oxide, carbon-nanotube films, and doped graph

22 trochemical cell comprising an fcc3-modified indium tin oxide cathode linked to a cobalt phosphate-mo

23 ES) and electrophoretically deposited on the indium tin oxide coated glass substrate at a low DC pote

24 ameter = 8 to 50 nm) to amine-functionalized indium-tin oxide coated glass electrodes (Glass/ITO), ob

25 er well made from polydimethylsiloxane on an indium-tin oxide coated microscope slide.

26 dmium-telluride quantum dots (CdTe-QDs) onto indium-tin-oxide coated glass substrate.

27 on of an external potential to a transparent indium tin oxide-coated electrode (the substrate), which

28 diameter Au nanoparticles (NPs) attached to indium tin oxide-coated glass electrodes in Br(-) and Cl

29 f colloids generated by photochemistry at an indium tin oxide-coated substrate.

30 el and two electrodes and were fabricated on indium tin oxide-coated substrates (e.g., polyester) sim

31 e consisting of a platinum catalyst layer on indium-tin oxide-coated glass by the application of two

32 trate-stabilized Au nanoparticles (NPs) onto indium-tin-oxide-coated glass (glass/ITO) electrodes as

33 hose with sputtered intrinsic zinc oxide and indium tin oxide contacts.

34 oxide/3-aminopropyl-triethoxysilane modified indium tin oxide electrode (ITO/APTES/GO/HSA) has been d

35 upon the oxidative polarization of an inert indium tin oxide electrode in phosphate-buffered water c

36 Each microfabricated indium tin oxide electrode is located in a separate micr

37 molecules onto a gold-nanoparticle-patterned indium tin oxide electrode.

38 Ag nanoparticles (NPs) at the surface of an indium tin oxide electrode.

39 oped a tailor-made hierarchically structured indium-tin oxide electrode that gives rise to the excell

40 In contrast, P450 BM3 adsorbed on unmodified indium tin oxide electrodes revealed 36% activity by ele

41 Gold and indium tin oxide electrodes were characterized with resp

42 Indium tin oxide electrodes were modified with DNA, and

43 These PCR fragments were immobilized to indium tin oxide electrodes, and oxidation of guanine in

44 m spin-coated films of lipids on transparent indium tin oxide electrodes, we formed two-dimensional n

45 lled electrodeposition protocol on activated indium-tin oxide electrodes (ITO), producing conformal f

46 The conducted experiments with a 10 nm indium tin oxide film, having plasmonic resonance in the

47 Epitaxial indium tin oxide films have been grown on both LaAlO3 an

48 ance of graphene is much higher than that of indium tin oxide films, especially at large incident ang

49 cell assembled on a polyethylene naphthalate-indium tin oxide flexible substrate with a PCE of 3.12%

50 ned electrode is shown to perform as well as indium-tin oxide glass.

51 s were electrophoretically deposited onto an indium-tin-oxide glass substrate and used for immobiliza

52 of the material on various surfaces (glass, indium tin oxide, gold) was evaluated with the tape peel

53 Alternatives to indium tin oxide have recently been reported and include

54 ted on graphene electrodes has out-performed indium tin oxide in power conversion efficiency (PCE).

55 ansmittance comparable to that of commercial indium tin oxide in the visible spectrum, but far superi

56 immobilizing anti-E. coli antibodies onto an indium-tin oxide interdigitated array (IDA) microelectro

57 wed interest as an anode material to replace indium tin oxide, is calculated to be a two-dimensional-

58 duced the electron injection barrier between indium tin oxide (ITO) and C70 by 0.67 eV.

59 evices fabricated from these complexes using indium tin oxide (ITO) and gold contacts appears to be d

60 fabricated by a self-alignment of conducting Indium Tin Oxide (ITO) and rGO layer without etching of

61 h efficiency solar cells, on semitransparent indium tin oxide (ITO) and titanium dioxide (TiO2) elect

62 The technique is tested with Indium Tin Oxide (ITO) and with poly(3-hexylthiophene) (

63 Indium and indium tin oxide (ITO) are extensively used in electroni

64 sparency, slides coated with a thin layer of indium tin oxide (ITO) are the standard substrate for pr

65 Silver (Ag) metal and indium tin oxide (ITO) are used for the fabrication of t

66 face and enzyme coated NPs were deposited on indium tin oxide (ITO) coated flexible polyethylene tere

67 -cMWCNTs) deposited electrophoretically onto indium tin oxide (ITO) coated glass electrode and have b

68 HeLa cells were grown directly on indium tin oxide (ITO) coated glass slides.

69 in film of NiO nanoparticles deposited on an indium tin oxide (ITO) coated glass substrate serves as

70 on the same Au nanoparticle (AuNP)-modified indium tin oxide (ITO) coated glass surfaces.

71 oxidase (GOx) was immobilized on a modified indium tin oxide (ITO) coated polyethylene terephthalate

72 electrode show superior efficiency to their indium tin oxide (ITO) counterparts because of improved

73 The electrodes were indium tin oxide (ITO) covered with a thin layer of poly

74 eters thick) were formed on quartz glass and indium tin oxide (ITO) directly from Nafion-[Ru(bpy)3]2+

75 ynechococcus elongatus , on a nanostructured indium tin oxide (ITO) electrode and to covalently immob

76 The distribution of current across an indium tin oxide (ITO) electrode can be altered by varyi

77 ization of affinity-purified antibodies onto indium tin oxide (ITO) electrode chips.

78 ing of gold nanoparticle (AuNP) arrays on an indium tin oxide (ITO) electrode using efficient and low

79 defined supported Ru(bda) catalyst on porous indium tin oxide (ITO) electrode.

80 ucture of PVDF nanowires-PDMS composite film/indium tin oxide (ITO) electrode/polarized PVDF film/ITO

81 (QD)-sensitized photocathodes on NiO-coated indium tin oxide (ITO) electrodes and their H2-generatin

82 Immobilization on indium tin oxide (ITO) electrodes of 330- and 1200-base

83 of a microchip device that uses transparent indium tin oxide (ITO) electrodes to measure quantal exo

84 urface consists of nanostructured silver and indium tin oxide (ITO) electrodes which are separated by

85 bon nanotube (SWCNT) forests were printed on indium tin oxide (ITO) electrodes.

86 ted polymeric films on optically transparent indium tin oxide (ITO) electrodes.

87 e to reference devices using polycrystalline indium tin oxide (ITO) electrodes.

88 d on Lossy Mode Resonances generated by thin indium tin oxide (ITO) films fabricated onto the planar

89 eposited zinc-oxide-based semiconductors and indium tin oxide (ITO) gate electrodes.

90 ists of a plano-convex PVC gel micro-lens on Indium Tin Oxide (ITO) glass, confined with an annular e

91 This control is achieved by embedding indium tin oxide (ITO) into these cavities.

92 Whereas indium tin oxide (ITO) is a well-known transparent condu

93 et price and limited resources of indium for indium tin oxide (ITO) materials currently applied in mo

94 Monodisperse 11 nm indium tin oxide (ITO) nanocrystals (NCs) were synthesiz

95 We first synthesize indium tin oxide (ITO) nanocrystals directly on function

96 Indium tin oxide (ITO) nanoparticles were spray-coated o

97 bsequent stripping of lead and cadmium on an indium tin oxide (ITO) optically transparent electrode (

98 alignment is demonstrated by various shaped indium tin oxide (ITO) patterns.

99 Indium tin oxide (ITO) reacts with tetra(tert-butoxy)tin

100 Using an indium tin oxide (ITO) sensor platform with a 50 nm Nafi

101 iron oxide (Fe3O4) nanodots fabricated on an indium tin oxide (ITO) substrate via a block copolymer t

102 veguide lightmode spectroscopy (OWLS) and an indium tin oxide (ITO) substrate, we show that asymptoti

103 a pi-conjugated organic semiconductor on the indium tin oxide (ITO) surface followed by doping with a

104 r cytochrome c directly immobilized onto the indium tin oxide (ITO) surface, we measured a reaction r

105 Bi NPs were fabricated on indium tin oxide (ITO) surfaces from a bismuth trichlori

106 nic acid self-assembled monolayers (SAMs) on indium tin oxide (ITO) surfaces.

107 aveguide was over-coated with a thin film of indium tin oxide (ITO) that served as an optically trans

108 aR and controlled potential coulometry in an indium tin oxide (ITO) thin-layer electrochemical cell.

109 An optically transparent patterned indium tin oxide (ITO) three-electrode sensor integrated

110 An indium tin oxide (ITO) transparent electrical heater is

111 raphene is more electrochemically inert than indium tin oxide (ITO) where ITO undergoes reduction-oxi

112 We demonstrate Mn CSV using an indium tin oxide (ITO) working electrode both bare and c

113 supported by a 20-nm-thick metallic film of indium tin oxide (ITO), a plasmonic material serving as

114 contrast, PC-12 cells interacted poorly with indium tin oxide (ITO), poly(L-lactic acid) (PLA), and p

115 place the most common transparent conductor, indium tin oxide (ITO), with a material that gives compa

116 Nanoporous films of indium tin oxide (ITO), with thicknesses ranging from 25

117 Amorphous indium tin oxide (ITO)-based thin-film transistors (TFTs

118 arge-neutral morpholino capture probes on an indium tin oxide (ITO)-coated glass slide.

119 Deposition of the Co-Pi catalyst on the Indium Tin Oxide (ITO)-passivated p-side of a np-Si junc

120 nic acid self-assembled monolayers (SAMs) on indium tin oxide (ITO).

121 ngs are being considered as replacements for indium tin oxide (ITO).

122 chnique coupled with a nanoscale transducer, indium tin oxide (ITO).

123 The working electrode was composed of indium tin oxide (ITO); the quasi-reference and auxiliar

124 n additional conducting-polymer layer at the indium-tin oxide (ITO) anode.

125 ed by an electropolymerisation process on an indium-tin oxide (ITO) coated glass substrate.

126 d cadmium selenide quantum dots (QCdSe) onto indium-tin oxide (ITO) coated glass substrate.

127 t have an optically transparent thin film of indium-tin oxide (ITO) covering the exterior is describe

128 nalysis of single redox events on a modified indium-tin oxide (ITO) electrode.

129 In this paper we describe fabrication of indium-tin oxide (ITO) electrodes and the design of a li

130 utions was studied at glassy carbon (GC) and indium-tin oxide (ITO) electrodes modified by gold nanop

131 nm) poly(aniline) (PANI) films deposited on indium-tin oxide (ITO) have been investigated using elec

132 ted polymer (MIP-FU) films were deposited on indium-tin oxide (ITO) or Au film-coated glass slides, P

133 simple, and disposable immunosensor based on indium-tin oxide (ITO) sheets modified with gold nanopar

134 biotin was covalently bound to a transparent indium-tin oxide (ITO) working electrode, which also ser

135 For this purpose, we integrate indium-tin-oxide (ITO) as a tunable electro-optical mate

136 old nanoparticles (Au NPs) attached to glass/indium-tin-oxide (ITO) electrodes as a function of parti

137 Polycaprolactone (PCL) electrospun fibers on indium-tin-oxide (ITO) glass provide a sufficient surfac

138 A transparent indium-tin-oxide (ITO) nanolens was designed to focus th

139 oantennas coupled to an optically absorptive indium-tin-oxide (ITO) substrate can generate >micrometr

140 as been electrophoretically deposited on the indium-tin-oxide (ITO) substrate.

141 al bonding of TPDSi(2) to PLED anodes (e.g., indium tin oxide, ITO) and its self-cross-linking enable

142 ally sputtered both intrinsic zinc oxide and indium tin oxide layers.

143 hermosynechococcus elongatus on a mesoporous indium-tin oxide (mesoITO) electrode.

144 n the optoelectronic properties of colloidal indium tin oxide nanocrystals is reported.

145 rfaces of mesoporous, transparent conducting indium tin oxide nanoparticle (nanoITO) electrodes to pr

146 A silver nanowire-indium tin oxide nanoparticle composite and its successf

147 generation from an individual semiconductor indium tin oxide nanoparticle is significantly enhanced

148 into a near field localized at its gap; the indium tin oxide nanoparticle located at the plasmonic d

149 Chemically modified indium tin oxide nanoparticle modified electrodes were u

150 f up to 10(6)-fold compared with an isolated indium tin oxide nanoparticle, with an effective third-o

151 n the sub-picosecond optical nonlinearity of indium tin oxide nanorod arrays (ITO-NRAs) following int

152 Our cells have a p-i-n structure (glass/indium tin oxide/NiO(x)/perovskite/ZnO/Al), in which the

153 The sensor consisted of an indium tin oxide optically transparent electrode (ITO OT

154 s in attenuation of light passing through an indium tin oxide optically transparent electrode (ITO-OT

155 gh surface area conductive metal oxide film--indium tin oxide or antimony tin oxide--coated with a th

156 mory using SiO(x) as the active material and indium tin oxide or graphene as the electrodes.

157 ed metal oxides, the most common of which is indium tin oxide, or ITO.

158 prototype sensing platform consisting of an indium tin oxide OTE coated with a cation-selective, sol

159 ensor-channel integration is the use of gold/indium-tin oxide patterned electrode directly on a porou

160 ble perovskite solar-cell devices made on an indium tin oxide/poly(ethylene terephthalate) substrate

161 stors, conductive transparent electrodes for indium tin oxide replacement, e.g. in light-emitting dio

162 In arrays of gold nanoparticles on an indium tin oxide substrate and arrays of 100-nanometer-d

163 to pearl shaped of Mn3O4-Cn nanocomposite on indium tin oxide substrate.

164 oated Au nanoparticles (Au NPs) deposited on indium tin oxide substrates was investigated.

165 to that of their counterparts on rigid glass/indium tin oxide substrates, reaching a power conversion

166 to achieve this first requires showing that indium tin oxide surfaces can be used for SMLM, then tha

167 hioesters to enolate acceptors on conductive indium tin oxide surfaces.

168 ting onto glassy carbon, gold, platinum, and indium tin oxide surfaces.

169 When anchored to nanoITO (indium tin oxide), the ruthenium chromophore-catalyst as

170 Thin films of indium tin oxide-the prototypical transparent electrode

171 findings indicate that electrolyte gating in indium tin oxide triggers a pure electronic process (ele

172 Electrode based on transparent layer of indium tin oxide was electrochemically modified with a l

173 To inject a cell, voltage was applied to the indium-tin oxide while simultaneously applying vacuum at